Auto pump (perhaps) squonker from Terminator

[hazozita]

Saw this on efun.top today. There’s very little actual info on it but, from what I can gather from the (very poor) video, it has an internal 10ml bottle that pumps liquid to the atty when a button is pressed on the front.

An interesting concept even if the actual execution looks to be clunky at best with a convoluted juice travel path and a bottle that would be a bear to fill without making a mess.

Can’t find any other info on it other than the efun listing and the efun promo video.

Terminator 75W TC Tempreture Control Kit - $36.99

 

[Btsmokincat]

And now for something completely different... besides the crappy video, that is a very interesting design with an internal powered pump instead of a squeeze bottle. I'd be willing to bet there will be other companies making a similar design.

Sent from my SM-G930R4 using Tapatalk

 

[puffon]

A malfunction "auto pump" could get messy....

 

[bullhcr]

A malfunction "auto pump" could get messy....

Is that a Terminator in your pocket or are you just happy to see me?

 

[b.m.]

It's interesting enough that now i have to try one out,will be ordering very soon.

 

[SteveS45]

I always get a kick out of watching a video like this and seeing the person fumbling with the device. Time to use a smaller nozzle on the bottle to allow air to escape I would say.

 

[hazozita]

I always get a kick out of watching a video like this and seeing the person fumbling with the device. Time to use a smaller nozzle on the bottle to allow air to escape I would say.

Yeah -- there was more juice on the outside of the mod toward the end of the video than there was in the internal bottle. On the plus side, it only took him a few moments to discover that juice comes out the bottle better if you unscrew the twist nozzle first.

@b.m. -- look forward to hearing your impressions of it when it comes in.

 

[Mr47]

Automatic bottom feeder

 

[muzichead]

Hey, its only $37!! If it doesn't work, it was only $37, right? Its another great design like the Kanger Drip EZ!!

 

[business2091]

Always nice to see innovation no matter how primitive it looks like in its early stage, cus of the potential of it becoming something greater in the future.

Sent from my Pixel

 

[ScandaLeX]

Hey, its only $37!! If it doesn't work, it was only $37, right? Its another great design like the Kanger Drip EZ!!

And speaking of the Kanger Drip EZ ..... I couldn't wait to get my hands on one- and after attempting to use it for maybe a 1/2 hr the leaky mess that it was saw its way to the thrash!

 

[MotoBlue]

Received mine today.
Here is what I posted on squonking.co.uk

First impressions - this single battery mod is about the same weight as a 2 battery mod, finished in a slightly textured matt paint. The top plate looks like brushed steel which I think cheapens it. The usb charges at around 1.3A! The screen brightness isn't the best I've seen but adequate.
Including postage it cost me $44 and arrived within a week of it being posted from efun.top - Fasttech eat your heart out.
If you watch the video, there is a rigid 10ml bottle - no sticky fingers filling it. I quickly put a build in the RDA, set it to TC -SS and I was in business within 15 minutes.

One long press of the little button under the fire button primes the internal medical pump - You release the button when juice appears. Then it's a short press to pump juice for 5 seconds (0.2ml) into the RDA. So far a comfortable vape with no dry hits and no over squonking. The RDa is 22mm - about the same height as the original Velocity - airy and moderately flavourful.

Now here is the problem - I cannot remove the RDA! Either it is screwed down so tight I am going to need a hammer and chisel to shift it or it is not removable! I hate to think it's fixed. I am going to use it for a few days before attempting to dismantle it to see if there is a 510 underneath the top plate.

Lastly, battery life isn't wonderful - obviously the pump uses battery. I have no regrets buying this providing the RDA can be removed. i have too many good RDAs waiting to go on this.

and here is a drawing that makes me think there may not be a 510.

 

[hazozita]

Thanks for the first impressions @MotoBlue. It would be a real shame if the atty is not removeable and, for me, a deal killer. Looking forward to hearing about whether it can be removed.

 

[zoiDman]

Received mine today.
Here is what I posted on squonking.co.uk

First impressions - this single battery mod is about the same weight as a 2 battery mod, finished in a slightly textured matt paint. The top plate looks like brushed steel which I think cheapens it. The usb charges at around 1.3A! The screen brightness isn't the best I've seen but adequate.
Including postage it cost me $44 and arrived within a week of it being posted from efun.top - Fasttech eat your heart out.
If you watch the video, there is a rigid 10ml bottle - no sticky fingers filling it. I quickly put a build in the RDA, set it to TC -SS and I was in business within 15 minutes.

One long press of the little button under the fire button primes the internal medical pump - You release the button when juice appears. Then it's a short press to pump juice for 5 seconds (0.2ml) into the RDA. So far a comfortable vape with no dry hits and no over squonking. The RDa is 22mm - about the same height as the original Velocity - airy and moderately flavourful.

Now here is the problem - I cannot remove the RDA! Either it is screwed down so tight I am going to need a hammer and chisel to shift it or it is not removable! I hate to think it's fixed. I am going to use it for a few days before attempting to dismantle it to see if there is a 510 underneath the top plate.

Lastly, battery life isn't wonderful - obviously the pump uses battery. I have no regrets buying this providing the RDA can be removed. i have too many good RDAs waiting to go on this.

and here is a drawing that makes me think there may not be a 510.

Just Curious.

But are you the Same MotoBlue who maintains those Bottom Feeding threads on Fasttech?

 

[MotoBlue]

I have just received an email from Efun - the RDA is fixed!! So one to avoid.

hi,
The RDA fixed on the mod, cant remove. thank you!

Yes ZoiDman, the same MotoBlue - just added Armor 1.0 style RDA to the list.

Squonking at Fasttech: FastTech Forums

 

[zoiDman]

...

Yes ZoiDman, the same MotoBlue - just added Armor 1.0 style RDA to the list.

Squonking at Fasttech: FastTech Forums

Then let me extend a BIG Thank You for all the Time and Effort you have put into it.

Can't tell you How Many great leads I have gotten on BF Stuff for that Thread.

 

[MotoBlue]

Thank you.

It started as a helpful reminder to myself. Now I wonder if its the world's biggest directory of squonking products. Sadly FT have missed out on a lot of products though but they are improving. Today they included 'w/ bottom feeder pin' in a description for the first time.

I have spent the last year plugging away at reviewers too. 'What no squonk pin! Why?'. If a manufacturer puts out an RDA that could, by it's design, take a squonk pin then I am on to them. No squonk pin = no sale.

 

[zoiDman]

Thank you.

It started as a helpful reminder to myself. Now I wonder if its the world's biggest directory of squonking products. Sadly FT have missed out on a lot of products though but they are improving. Today they included 'w/ bottom feeder pin' in a description for the first time.

I have spent the last year plugging away at reviewers too. 'What no squonk pin! Why?'. If a manufacturer puts out an RDA that could, by it's design, take a squonk pin then I am on to them. No squonk pin = no sale.

I hear you.

And that is why I subscribed to your Thread. Because I could get Updates on when BF RDA's hit FT. Most of which I couldn't find by doing a FT Search.

I think Every RDA that can allow Bottom Feeding should come with a BF Pin. It just adds Pennies to the Cost of an RDA. And even if a person isn't into Squonking now, there is a Good Chance they will try it some times down the road.

 

[hazozita]

Let me add a big thank you as well, @MotoBlue for your FT thread. It’s been an outstanding resource for me when looking for squonk gear. It pointed me to products I would have never known of otherwise. Excellent work!!

 

[Mr47]

One to avoid!