Batteries For Hana V3 CLone

[paulb787]

I just purchased a hana v3 clone and ITS COMING TODAY! I currently only have an efest 1600mah 18650. I understand vtc4 and vtc5 are recommended and I have some on order. Will the efest work at 30 watts? I also see that a local store carries the 35 amp 2500mah efest batteries. Just don't want to wait for the vtc5's to come in before cranking it up to 30 watts. So, would I bee ok with the efest 1600mah or should I go get the 35 amp efest?

Thanks

 

[p7willm]

Using Ohms law a .3ohm coil at 30 watts takes 3.87 volts and 7.7 amps. The board in the mod will have some overhead, lets say 10% to be safe, and we get about 8.5 amps.

Are you going to use it at 30 watts? How safe do you feel using 8.5 amps from a battery rated at 10 amps?

I, it's just me others will have a different opinion, would have no problem cause I would keep under 20 watts. Before I pushed on to 30, and I would cause whats the point of it going to 30 if you never try, I would get a better battery.

 

[Zamazam]

I'm using the Efest 2600Mah 35A battery in my clone, more for the Mah rating and longer vape time. I'd go on the safe side and get the 35A Efest.