that's my plan, to remove the carto holder and toss a bigger battery in. vape meet is on the 29th so I have to wait until then for mine. seems so far away I almost can't wait
Boge Revolution V2 Bottom Feed
- Thread starter heXy
- Start date
- th_trl_thread_readers 0
-
- Tags
- revolution
- Status
Are your batteries out of RC projects? I'm wondering where I could find, or order a lipo with decent mAh @ 3.7 volts..
Check out lighthound they have quite a few different batteries.
Check out lighthound they have quite a few different batteries.
I order all my lipos from hobbycity.com they have thousands to choose from. this 1450 mah is about 35mmx80mmx2mm and I have 3 cels.
I know a lot of people use a123 cels in their mods. I don't think we need that much discharge current though for cartos hehe. I have to charge at 10 amps so I can be vaping in 10 mins. can't wait...
I know a lot of people use a123 cels in their mods. I don't think we need that much discharge current though for cartos hehe. I have to charge at 10 amps so I can be vaping in 10 mins. can't wait...
Thanks VapourGuy, I checked the site out; they do have a lot of batts to choose from, no Lithium Polymers though.
Pipeous: I'm going to check hobbycity out. 10A charger? mmm I want one lol
Wow! I see a ton of lipos @ hobbycity.com, good prices to. They have a nice 850mAh for a few bucks, dimensions aren't bad.
For the price; I'll stock up! Get a bigger one for my little Helicopter, it's only a little indoor, but fun non-the-less.
Pipeous: I'm going to check hobbycity out. 10A charger? mmm I want one lol
Wow! I see a ton of lipos @ hobbycity.com, good prices to. They have a nice 850mAh for a few bucks, dimensions aren't bad.
For the price; I'll stock up! Get a bigger one for my little Helicopter, it's only a little indoor, but fun non-the-less.
Last edited:
ya, I have lipo packs in all my radios from there. I use lipos and bec's for my 1/5 scales. only 1 nmh pack in all my stuff, and only because of it being a motorcycle and not much room for anything. hcity has esc's, servos etc so cheap. I picked up the servo for my motorcycle for $4. they have a go kart I really want.
I flew helis for quite some time. check out my gallery at runryder.com ... I built a scaler augusta 109 with the swiss rega rescue colors and numbers. I played with the small ones but the big ones are easier to see.
I flew helis for quite some time. check out my gallery at runryder.com ... I built a scaler augusta 109 with the swiss rega rescue colors and numbers. I played with the small ones but the big ones are easier to see.
Well I kind of lucked out. I was talking to Sparky yesterday. He bought a V2 and never opened it. So I bought it today. I am liking it so far. we'll see how it works out. I find it comfortable though and it fires fine with lr boge cartos and also the lr eastmall attys.
I also got a bottle of lorann's vanilla butternut flavouring mmmm tasty stuff. fixed up a juice I didn't really like just nicely. and I have a LOT of dyi base.
I also got a bottle of lorann's vanilla butternut flavouring mmmm tasty stuff. fixed up a juice I didn't really like just nicely. and I have a LOT of dyi base.
Well once CP is sorted out, I might receive mine lol... I should have had it last Monday at the latest, but it was over-looked, twice...
I have some JC stuck in transition too, but I haven't had the Black Cherry Tobacco or Cola Gummies yet, so not knowing what I'm missing seems to be holding me off...
I have some JC stuck in transition too, but I haven't had the Black Cherry Tobacco or Cola Gummies yet, so not knowing what I'm missing seems to be holding me off...
I have tried boge lr cartos, used one of the stock cartos, and right now I have an eastmall lr atty on. no leaks no mess. this is dripping without the hassle. It is sure tight getting things threaded up. the incl usb cable is too short for use as a pt. the stock cartos are too weenie for me. battery life is pretty good.
I sold a ton of parts and such to a bud tonight. his vaping journey has begun. now that it works so good with these atty's, I am going to stick with this setup for a while. I have a second setup still with this pump bottle (another cool gadget from sparky).
I have some mixing to get done. 120ml of 100mg base to work with
this vanilla butternut is tasty. I added a little almond and maple mmm.
I sold a ton of parts and such to a bud tonight. his vaping journey has begun. now that it works so good with these atty's, I am going to stick with this setup for a while. I have a second setup still with this pump bottle (another cool gadget from sparky).
I have some mixing to get done. 120ml of 100mg base to work with
this vanilla butternut is tasty. I added a little almond and maple mmm.
I picked up one of these V2 from my sister it was too big for her so she gave it to me. I want to pull that useless anion out and put a bigger battery in. I know the V2.1 has this pulled out does anyone have a internal photo of the V2.1 so I can see what parts I can pull out.
My impression is mixed I like having the bottom feed but the bottle is a pain to pull out and the covers on the bottom will soon be lost. The 500mAh lasts me 4 hours not bad but not long enough for me I'm use to my Indulgence with a 2400mAh 18650.
The build quality is cheap it can easily come apart and I'm sure the first time I drop it I'll be piecing it back together. The USB power cable is too short but I had a USB power supply from old cell phone with 6' cord that works perfect. I converted the useless rist strap into a lanyard to wear around my neck.
It would have been nice if it shipped with a second bottle and needle for the few cents it would have cost to add it. The atty connection should have had more threads only a couple threads could wear out over time. It would have been nice if when it's charging it provided a 5V passthrough instead of drawing off the battery.
Overall I'm happy with it but I would have not spent $60 knowing it's shortfalls it's a $40 device at best maybe V2.1 will be better but I think I'll wait for V3 before I'd buy one.
My impression is mixed I like having the bottom feed but the bottle is a pain to pull out and the covers on the bottom will soon be lost. The 500mAh lasts me 4 hours not bad but not long enough for me I'm use to my Indulgence with a 2400mAh 18650.
The build quality is cheap it can easily come apart and I'm sure the first time I drop it I'll be piecing it back together. The USB power cable is too short but I had a USB power supply from old cell phone with 6' cord that works perfect. I converted the useless rist strap into a lanyard to wear around my neck.
It would have been nice if it shipped with a second bottle and needle for the few cents it would have cost to add it. The atty connection should have had more threads only a couple threads could wear out over time. It would have been nice if when it's charging it provided a 5V passthrough instead of drawing off the battery.
Overall I'm happy with it but I would have not spent $60 knowing it's shortfalls it's a $40 device at best maybe V2.1 will be better but I think I'll wait for V3 before I'd buy one.
Last edited:
https://j-tekimports.com/products/starter-kits/revolution-2/# hope this helps, came across it the other day. click picture to view larger image.
Thanks for the link but it does not show what parts they removed or how they mounted the switch
I love your avatar
I agree the battery life sucks. mine died at the vape meet. but for me while working I have the usb cable plugged into my netbook so that helps. going out I still have to bring my ego battery (or netbook etc).
the seal on the needle part of the bottle split on mine and I got a lot of juice spilled. I used crazy glue to fix it. took a couple applications. going to rip mine apart soon to change the battery as well.
the seal on the needle part of the bottle split on mine and I got a lot of juice spilled. I used crazy glue to fix it. took a couple applications. going to rip mine apart soon to change the battery as well.
I'm happy i never ordered one, i was about to press the trigger on Nicfitnation to get one, then started reading this thread... ended up being patient and buying a Reo Grand from a Forum member, now lets just hope that it's waiting in my mailbox tonight when i get home !!!
ok I have a spare bottle solution for you. we got some sample JC at the vape meet. the bottles are almost identical height and the needle part pops right on. I tried with the label on first... wanna talk tough to get out haha... with the label off, these bottles slide in and out very easy. I just put some self sticking foam tape on the bottom of the bottle to make up for the mm or so of play. works awesome. here's pics
Well I got the replacement from NFN today... Finally... However they shipped the replacement without the doors on the bottom... Guess I shouldn't have thrown out the DOA one.
This one will join it, this is the dumbest problem I can say I've been blessed with. I'm now 80 in the hole on this purchase...
Nobody told me what to keep from the other kit, or what they WEREN'T going to ship with the replacement. So I tossed the other DOA unit.
So upset about this.
NFN was supposed to notify me about keeping the doors from the other unit, but the email didn't send through. Doors are on the way.
Now let's test the duration of this battery, I'll vape heavily on my non-nic blend and see >
On a lighter note; Juicy Clears Coke Bottle Gummies truly do rock!
This one will join it, this is the dumbest problem I can say I've been blessed with. I'm now 80 in the hole on this purchase...
Nobody told me what to keep from the other kit, or what they WEREN'T going to ship with the replacement. So I tossed the other DOA unit.
So upset about this.
NFN was supposed to notify me about keeping the doors from the other unit, but the email didn't send through. Doors are on the way.
Now let's test the duration of this battery, I'll vape heavily on my non-nic blend and see >
On a lighter note; Juicy Clears Coke Bottle Gummies truly do rock!
Last edited:
I was going to pull the trigger on one of these from NFN as well but the canada post strike stopped me and now i really don't see my self getting one. I'm leaning towards gettin the Ali'i, even with the long wait it may be worth it to get a product that is unique and of quality.
I also have really been wanting to test out the coke bottle gummies from JC and some others but i just cant justify a 30ml bottle @ $22 just to try flavours, but i may just have to for this one. We need to come together and horde them with emails till they will let us buy sample packs! muahahah don't underestimate the power of vapours in numbers =)
I also have really been wanting to test out the coke bottle gummies from JC and some others but i just cant justify a 30ml bottle @ $22 just to try flavours, but i may just have to for this one. We need to come together and horde them with emails till they will let us buy sample packs! muahahah don't underestimate the power of vapours in numbers =)
Haha, we're a rowdy bunch!
I must say, I'm enjoying the revoV2. Battery has lasted quite a while for a 500mAh. And it's nice not having as much maintenance. Turn it, squeeze it, vape on.
- Status
Similar threads
- Locked
- Locked
