Burning Cartomisers? Dangerous?-510/Kr808/4081...etc filler type cartos

[BanjoMan]

Where's the Flux Capacitor?

My latest prototype looks about like all the rest of them, so I didn't take a photo. Here's a drawing of the latest Masterpiece, though. I doubt if it interests most of you, but there may still be someone on this thread who will glance at it.

**************************************

**************************************

 

[br5495]

Where's the Flux Capacitor?

The Hello 016 battery cannot provide enough gigawatts to drive a Flux Capacitor.

 

[tiburonfirst]

.........................

 

[kwcharlie]

I gave him one but he put in one of those hand built radios, talking with Tesla now I bet

Where's the Flux Capacitor?

 

[Alžběta Madragana]

The Hello 016 battery cannot provide enough gigawatts to drive a Flux Capacitor.

LOL! Y'all cracking me up.

 

[Alžběta Madragana]

So I decided to try a little something new in the way of Tanks.. seeing as that seems to be all the rage these days. Back to fasttech and I got a 'Bulb' style tank. It's very similar to the EVOD. It uses 'replaceable' heater cores, but of course, you know us vapers - we just GOTS to pull stuff apart and see if we can rebuild it ourselves! I placed the order far enough in advance so it won't be slowed down by an upcoming Chinese Holiday (begins October 1st)..
I'll let y'all know how it does. I'm still waiting on my last order - 7 days and counting - "International Letter" from port of Hong Kong... I'm sure it'll be here soon, though. I'm anxious to try out their DeKang "Marlboro" (High Nico content, of course)..
"Happy vaping!"

 

[Alžběta Madragana]

whatcha doing up, alz?
it's the middle of the night in texas!

LOL! OK, so here I am going back through old postings, looking for that link you posted on how to rebuild an EVOD BCC 'heater' coil. I had saved the page, then lost it. Silly me.
Middle of the night? Hmmmmmmmm. Well, this is 'normal' for me. I've been an insomniac ever since the War (ODS 1991). I'm used to it!
Sorry so late replying to this!
Update: Found it! just a few pages back. Mucho gracias again, Ms. Tibs!

 

[tiburonfirst]

So I decided to try a little something new in the way of Tanks.. seeing as that seems to be all the rage these days. Back to FastTech and I got a 'Bulb' style tank. It's very similar to the EVOD. It uses 'replaceable' heater cores, but of course, you know us vapers - we just GOTS to pull stuff apart and see if we can rebuild it ourselves! I placed the order far enough in advance so it won't be slowed down by an upcoming Chinese Holiday (begins October 1st)..
I'll let y'all know how it does. I'm still waiting on my last order - 7 days and counting - "International Letter" from port of Hong Kong... I'm sure it'll be here soon, though. I'm anxious to try out their DeKang "Marlboro" (High Nico content, of course)..
"Happy Vaping!"

oh my! i sure hope it's not the one i thought looked rather interesting only to find out it's not meant for e-juice

 

[Katya]

So I decided to try a little something new in the way of Tanks.. seeing as that seems to be all the rage these days. Back to FastTech and I got a 'Bulb' style tank. It's very similar to the EVOD. It uses 'replaceable' heater cores, but of course, you know us vapers - we just GOTS to pull stuff apart and see if we can rebuild it ourselves! I placed the order far enough in advance so it won't be slowed down by an upcoming Chinese Holiday (begins October 1st)..
I'll let y'all know how it does. I'm still waiting on my last order - 7 days and counting - "International Letter" from port of Hong Kong... I'm sure it'll be here soon, though. I'm anxious to try out their DeKang "Marlboro" (High Nico content, of course)..
"Happy Vaping!"

Link please?

Happy Vaping and Happy Fall to y'all!

 

[Alžběta Madragana]

Link please?

Happy Vaping and Happy Fall to y'all!

Here 'tis: https://www.fasttech.com/p/1391903
Can't wait to get that puppy and start in on it...
Tibs, it was meant for e-Juice. Post a link on the one you were looking at?

 

[Alžběta Madragana]

The EVOD BCC is pretty decent, but I'm losing interest in it. I've pulled out my ole trusty OG Puck Genisis again... Heater coils aren't lasting as long on the EVOD and it's a lot more work redoing the Heater Coil than the Genisis is... I'm not crazy about buying their Heater Coil replacement cores every few days!

 

[Katya]

Here 'tis: https://www.fasttech.com/p/1391903
Can't wait to get that puppy and start in on it...
Tibs, it was meant for e-Juice. Post a link on the one you were looking at?

Hmm.... Did you read this?

Note: despite the tank has 2.8ml capacity, you can only fill it with a few drops of e-liquid at a time. Otherwise, the air hole may get blocked by excess liquids.

 

[tiburonfirst]

Here 'tis: https://www.fasttech.com/p/1391903
Can't wait to get that puppy and start in on it...
Tibs, it was meant for e-Juice. Post a link on the one you were looking at?

that's the one

 

[br5495]

Hmm.... Did you read this?

I was going to tell him last night, but I decided to let you do it, heheh.

It's an atomizer, not a cartomizer. I guess the globe is just for pretty. Looks like it's large enough to accumulate a lot of condensation.

 

[tiburonfirst]

lol! poor alz - the same thing caught my eye but i was fortunate that somebody set me straight before i put an order in!

i did like that bubble shape!

 

[Alžběta Madragana]

O no, I saw that about only putting a few drops in. I'm OK with it.
However, (I'm stepping up on my soapbox now), due to the (*&%$###! up 'security' protocol at Hong Kong Postal Services, they've HELD MY PACKAGE hostage for 12 days now!!!
Damned security BS!
I'm sick of the crap foisted on us in the name of 'security'.
Whose security?
Certainly not mine!
But, I'm still hoping to get my stuff... eventually... someday... fingers crossed.... hmmmmmmmmmmmmm.... meanwhile, back at the ranch in Cresson... I'll just have to wait... and vape.

 

[CES]

so..it's basically just a dripping atty with a fragile enclosure? meh.
(that people are reporting is good with other stuff? argh)

Hope your package arrives soon Al

 

[kwcharlie]

IMHO it’s for “specialized” use, using the toothpaste like e-juice they make for it I get ma ma hu hu [so so] vapeing that lasts 8 to 10 good vapes till I have to refill. Our friends at Gotvape sell it and yes BR it gets LOT of condensation all gunkie on the inside of the globe but that can be removed: removed not harvested BR, that’s my story and I’m sticking to it .

I was going to tell him last night, but I decided to let you do it, heheh.

It's an atomizer, not a cartomizer. I guess the globe is just for pretty. Looks like it's large enough to accumulate a lot of condensation.

 

[kwcharlie]

How’s it going BR? Follow you here and my prayers are with you and Peggy.
Got to get over there and see the new stuff you’re making, or just wait till the Chinese copy it.

I’ve just given up on even winding coils, travel with a bunch of twists and the old fateful cartos and BC/TC’s but hardly home enough to play at the bench.

This is kinda what the real thing looks like. I can't see well enough to focus the camera and this shot is about the best I can do.

****************************************



******************************************

Look closely near the top of the tube and you can see one of four air holes.

There appears to be a space between the cartomizer and battery, but it's not. The complete cartomizer body is clear and the bottom end tightens down on the battery end.

What do you think about the adjustable air intake? I run it wide open and just breath through it while pushing the button, but I can make it draw just like a stock CE-2 by twisting the mouthpiece the correct amount.

Do any of you other kids have an opinion about feature? I'm kinda curious.

 

[Alžběta Madragana]

Thank you for the kind wishes, CES!
BR, I think you've done a wonderful job on your carto.
Toke it up, man!