Burning Cartomisers? Dangerous?-510/Kr808/4081...etc filler type cartos

[tiburonfirst]

Happy Birthday, Banjo!

.....................

 

[AttyPops]

Happy Birthday, Banjo!

 

[Kent C]

Banjo!

 

[CES]

Happy (belated) Birthday Banjoman

 

[BanjoMan]

Thanks for the B-Day wishes, everyone!

 

[Koman]

Banjo, happy birthday to U!

 

[Katya]

Good morning, Dangerous People!

I have a confession to make--After months of sampling all kinds of fillerless gizmos, I filled up a Boge carto (blame spring cleaning) and I was very pleasantly surprised. The familiar snap, crackle and pop sounds made me very happy indeed. Sooo... I went searching the web for a small carto tank that would fit my eGo-class batteries without looking like a mushroom. And this is what I found:

BOGE F15 TANK CARTOMIZER 1 ML - $4.00 : VapeLite your source for Boge quality electronic cigarettes, Boge electronic cigarettes

Genuine Boge, 16 mm diameter--same as eGo, holds probably 2 ml altogether (1 ml in the carto, another 1 in the tank). 4 dollar tank??? And they sell pre-punched cartos.

Any thoughts? Never ordered from that site.

 

[Kent C]

Good morning, Dangerous People!

I have a confession to make--After months of sampling all kinds of fillerless gizmos, I filled up a Boge carto (blame spring cleaning) and I was very pleasantly surprised. The familiar snap, crackle and pop sounds made me very happy indeed. Sooo... I went searching the web for a small carto tank that would fit my eGo-class batteries without looking like a mushroom. And this is what I found:

BOGE F15 TANK CARTOMIZER 1 ML - $4.00 : VapeLite your source for Boge quality electronic cigarettes, Boge electronic cigarettes

Genuine Boge, 16 mm diameter--same as eGo, holds probably 2 ml altogether (1 ml in the carto, another 1 in the tank). 4 dollar tank??? And they sell pre-punched cartos.

Any thoughts? Never ordered from that site.

Looks good. Half the price of vapor beast.... 510 connection - no 'eGo skirt' so you'll need one of these:

http://www.vaporbeast.com/product_p/a62.htm

... but I don't think it adds that much length... just fills in the gap. Not sure though - never had to use one.

 

[TomCatt]

Looks OK to me Here's a mention in another thread - http://www.e-cigarette-forum.com/forum/tanks/394735-tanks-boge-cartomizers.html - says polycarb tank; I don't know if that's true or not, but if it is, just be careful of the ususal 'tank eating' juices.

 

[Katya]

Looks good. Half the price of vapor beast.... 510 connection - no 'eGo skirt' so you'll need one of these:

http://www.vaporbeast.com/product_p/a62.htm

... but I don't think it adds that much length... just fills in the gap. Not sure though - never had to use one.

Thanks Kent! I've got one of those already. I may add another one, without the lip, for a smoother seam.

Wish me luck!

 

[Katya]

Looks OK to me Here's a mention in another thread - http://www.e-cigarette-forum.com/forum/tanks/394735-tanks-boge-cartomizers.html - says polycarb tank; I don't know if that's true or not, but if it is, just be careful of the ususal 'tank eating' juices.

Thank you Kitty Catt.

I don't do tank eating juices. If it cracks plastic, I don't want it!

Off to order one--or two.

Do I need a slap yo mama and a saddle valve?

I have all those boxes of Boge and SmokTech cartos. I better start peeling those black stickers off.

You guys are the best.

 

[Kent C]

Thanks Kent! I've got one of those already. I may add another one, without the lip, for a smoother seam.

Wish me luck!

Is it a replaceable filler carto inside?? Good luck Also there are a few type adapters - again - only from reading on the one, but you have your 'regular' 510 to eGo connection - what I have on my madvapes ohm meter... 510 - eGo cone threading - 510 ....and then, I think, the one linked that just fills the gap. Again, I don't have one so not totally sure....

 

[Kent C]

I just ordered an eGo mini last night 450mAh... so now we'll see what a mini and baby T3 looks like.... checked the web and only saw that SD keyring + baby T3.... Also got some of those 'eGo stands'....

 

[Katya]

Is it a replaceable filler carto inside?? Good luck Also there are a few type adapters - again - only from reading on the one, but you have your 'regular' 510 to eGo connection - what I have on my madvapes ohm meter... 510 - eGo cone threading - 510 ....and then, I think, the one linked that just fills the gap. Again, I don't have one so not totally sure....

Sure does. A boge LR--my favorite, but will fit any regular size single coil carto.

Yes, thread covers or sleeve cones come in different sizes and shapes. I've got a D already, but I also want to get a B--just a flt tube, no lip, but vapelite doesn't carry them. i'm in no hurry. Anyway, order placed.

eGo Thread Sleeve Type B - Fits All Std eGos CHROME [gv-egoTypeBTHREADSLEEVE-CHROME] - $2.45 : GotVapes.com, E-cigarette Supplies - Atomizers Cartomizers Mods Juice and more

 

[Katya]

I just ordered an eGo mini last night 450mAh... so now we'll see what a mini and baby T3 looks like.... checked the web and only saw that SD keyring + baby T3.... Also got some of those 'eGo stands'....

Ego stands? I use my pretty tray!

The 450 and 350 mA egos are SmokTech. The 400 mA are Vision. I believe they are all 3.7v regulated. Is that correct?

I think I want one now--to go with my new carto tanks and my baby T3s...

Life is good.

Back to cleaning.

Thanks again for your help!

 

[Kent C]

Sure does. A boge LR--my favorite, but will fit any regular size single coil carto.

Yes, thread covers or sleeve cones come in different sizes and shapes. I've got a D already, but I also want to get a B--just a flt tube, no lip, but vapelite doesn't carry them. i'm in no hurry. Anyway, order placed.

eGo Thread Sleeve Type B - Fits All Std eGos CHROME [gv-egoTypeBTHREADSLEEVE-CHROME] - $2.45 : GotVapes.com, E-cigarette Supplies - Atomizers Cartomizers Mods Juice and more

Ok... I know some don't have the batt notches in them ... from earlier @##$!! posts.

 

[Kent C]

Ego stands? I use my pretty tray!

The 450 and 350 mA egos are SmokTech. The 400 mA are Vision. I believe they are all 3.7v regulated. Is that correct?

I think I want one now--to go with my new carto tanks and my baby T3s...

Life is good.

Back to cleaning.

Thanks again for your help!

I use my pretty tray too for full PV's but I have a back up batt for each and soooo.... Glad you're using the tray! Wonder how many others are?

As far as the batts - not sure:

http://www.e-cigarette-forum.com/fo...35921-3-7v-regulated-ego-style-batteries.html

 

[tiburonfirst]

all taken care of, i see! tweety's order seems to be in!

good thing, too - i just came back from tractor shopping - hard to switch from a kawaski engine to an ego!

 

[Katya]

So, did you get one?

My package was shipped within an hour. Must be some kind of a record. Only Vicky from Cignot ships that fast.

 

[Katya]

I use my pretty tray too for full PV's but I have a back up batt for each and soooo.... Glad you're using the tray! Wonder how many others are?

As far as the batts - not sure:

http://www.e-cigarette-forum.com/fo...35921-3-7v-regulated-ego-style-batteries.html

I guess we'll never know for sure. Looks like everybody has a theory. Oh where is Scottbee?!

http://www.e-cigarette-forum.com/fo...208-anyone-tried-ego-mini-46.html#post8822385