Cartoz carts E2's etc. post it here
- Thread starter BuzzKill
- Start date
- th_trl_thread_readers 0
- Status
The difference is no juice-frying CE2. I use it with Fushions that I slot myself, and every draw tastes like the first off a freshly-filled Fushion.
Oh cool , I actually use the Ce2r4 LOL ! I just pull all the silicon out and use it like a atty ! I just do not like the taste of cartos anymore ! the Ce2 stripped tastes like an atty to me.
OK.. so I am still working hard to figure out the atomizer thing and to find one I like. What is the difference between this one and the storm tank I got? The storm tank worked well for the first couple of days, but the flavor and the TH hit dropped off pretty quickly, now it is just weak! Is the Vape-O-Matic good, is it a MAP Tank? Are there better MAP Tanks to try?
I am going to have a drawer full atomizers I do not really like by the time my search is over! Hopefully some of the ones I decided to put aside will work better when I get a buzz pro!
PI are you slotting the Fusions with a dremel? And was the carto that it came with lame?
Aww dang....they have a purple sleeve for the tank!! This is the first tank I have had any interest in. $25 may as well be $1million right now tho, movers are coming Monday. $140 per hour with a minimum of 3 hour charge
Last edited:
The Storm tanks use CE2s, which you may or may not like; personally, I've found them to suck egregiously.
These guys use cartos with slots cut into the sidewall, into which the juice flows and keeps the filler permeated like a newly-filled carto at all times.
I'm using a Black & Decker model, Bov; same difference, though.
The cartos that come with it are Boge 510s, right up your alley.
I fricking hate that ce2 stuff - but this shows promise. When I get back I will have to check this out.
Thank you PIC.
The MAP tank with the E2 puts out tons of vapor but it's like every fillerless or tank I've tried it weakens the taste of the juice. I have to do the fusion tank that PI has done and try that.
I think the reason it weakens it is because there is more moisture to flavor ratio. That's the only thing I can figure. I'm doing the P.I. Fusion Tank Mod tonight. I guess I'll start calling it the PIF Tank. The PI Fusion Tank for short.
MY BAD it was Ruppy that came up with the Fusion tank. So I'll have to change that name to the RUF Tank or the RFT.
I think the reason it weakens it is because there is more moisture to flavor ratio. That's the only thing I can figure. I'm doing the P.I. Fusion Tank Mod tonight. I guess I'll start calling it the PIF Tank. The PI Fusion Tank for short.
MY BAD it was Ruppy that came up with the Fusion tank. So I'll have to change that name to the RUF Tank or the RFT.
Last edited:
Thanks for the answer PI. It'll have to get put on my wish list for now but yep, that just may be the tank of my dreams. I have a Harbor Freight store right here in town too, so a cheap dremel clone would be easy to pick up. Heck, I have a hack saw LOL
I fricking hate that ce2 stuff - but this shows promise. When I get back I will have to check this out.
Thank you PIC.
+1
ֹ
Let me know your opinion on it when you've had some time with it 5C!!
Are you a new Pawpaw yet?
Are you a new Pawpaw yet?
You know Bovinia I bought a $10.00 tool like the Dremmel and it's still working. I got the great big dremmel kit with the cable , cutters, mower sharpener, planer, etc. it had everything. Anyway I burnt it up so they sent another one and I burnt it up. sent another one and same story. Finally they sent me one that has digital display and keeps the RPMs constant under load. I guess they got tired of sending me the others. They said this is the best one we make. Anyway through 4 Dremmels the $10.00 one has always worked. The bits fit in the Dremmel too.
Let me know your opinion on it when you've had some time with it 5C!!
Are you a new Pawpaw yet?
No but they are out walking trying to get him here. They couldn't induce because his lungs were at a 9 and by law had to be at a 10 before they could induce labor but by fri. I think they're going to if he don't quit being stubborn.
I can prolly find a dremel like tool in among my late FIL's tools in the basement. I had to go over there today and take down an old bed and frame and put it out at the curb for the trash (or pickers if someone wants it) and I needed an allen wrench. Went down to the basement and found a cool old box that had allens from as tiny as a seed tick to as big as my thumb!! I bet that set had at least 50 sizes...and to think my MIL wanted to give all that stuff away.
Tell your daughter she and soon to be son they are still in my prayers. If that youngin knew how much love was going to be lavished on him, he'd jump right out into your arms!!
Tell your daughter she and soon to be son they are still in my prayers. If that youngin knew how much love was going to be lavished on him, he'd jump right out into your arms!!
He's going to be loved by many. I've never seen a baby more waited on by everyone and wanted than this one. I'm trying to find out where to put the slot in the Fusion and I can't find the post it was in.
I got my $10.00 dremmel from big lots. Best $10.00 I ever spent.
I got my $10.00 dremmel from big lots. Best $10.00 I ever spent.
Haha, I love Big Lots, and here we have a similar chain called Ocean State Job Lots...it's even cheaper
I remember the post you're looking for but can't remember where it was.
I remember the post you're looking for but can't remember where it was.
I have both the Storm Tanks and the Liquidator and love them both, ESPECIALLY the Storm Tanks. The size of the bigger one is just right for the better wicking of E2’s and smaller than a MAP. With the bigger contact and soft tube gasket the leaking problem for a clear tank is solved. The LED’s work sometimes, so happy that’s the biggest problem I’ve had with Stormy’s tanks, as far as I’m concerned the problems with the Clear Tanks for the E2 is solved, the only thing that could get any better is to make them cheaper. Now if he would just make a E2 with a SS Mesh wick to fit his tanks.
Just got them both before I went out on this job in the GOM last week so haven’t had a chance to cut cartos the Liquidators, don’t care for the ones that came with it (don’t really care for ANY cartos) but should have Fusions waiting for me at home to slot. I admire the construction so much I ordered another one for the DC’s, should be the same as the ones I have. Now if those Fusions are as good as 5C says I’ll be set. There is the problem of the cartos can slide up and down in the o-ring seals, no leaking unless you slide it past an o-ring. With the lip on the Fusions the sliding won’t be as big a problem. I got some o-rings on the rig to play with to tighten it up but it’s not that big a problem IMHO. Oh did I say they DO NOT LEAK.
Just got them both before I went out on this job in the GOM last week so haven’t had a chance to cut cartos the Liquidators, don’t care for the ones that came with it (don’t really care for ANY cartos) but should have Fusions waiting for me at home to slot. I admire the construction so much I ordered another one for the DC’s, should be the same as the ones I have. Now if those Fusions are as good as 5C says I’ll be set. There is the problem of the cartos can slide up and down in the o-ring seals, no leaking unless you slide it past an o-ring. With the lip on the Fusions the sliding won’t be as big a problem. I got some o-rings on the rig to play with to tighten it up but it’s not that big a problem IMHO. Oh did I say they DO NOT LEAK.
Well the MAP I have is to big for a fusion so I'm goting to have to either pick another smaller one up or just make one. I've been wanting to make one anyway so that will probably be what I end up doing.
Haha, I love Big Lots, and here we have a similar chain called Ocean State Job Lots...it's even cheaper
I remember the post you're looking for but can't remember where it was.
I found it. It was Ruppy not PI that's why I couldn't find it.
Here ya go folks.Haha, I love Big Lots, and here we have a similar chain called Ocean State Job Lots...it's even cheaper
I remember the post you're looking for but can't remember where it was.
http://www.e-cigarette-forum.com/forum/cartomizers/189208-tank-o-matic-liquinator-v4-1-a.html
http://www.e-cigarette-forum.com/forum/cartomizers/189208-tank-o-matic-liquinator-v4-1-a-4.html How to video with this one.
Last edited:
- Status
Similar threads
- Locked
