Cartoz carts E2's etc. post it here

[moorea]

OK... well ever had one of those days! I do not know where my head is. Hubby got home, screwed his tank off tried to screw the tank with the regular carto in it on his BP then realized he has a 510 cap! So that won't work.

The husband just moved the screw in my top cap up a tad bit and worked!

Call me crazy here, but I am not noticing much of difference between the LR and the Regular! The only difference I am noticing is the regular has a REALLY REALLY tight draw. I am thinking (which is always dangerous) that the tight draw might be due to the fact that this new tank is so tight there is less flow??????

 

[BuzzKill]

Dud liquinator, dud batteries, dud carto! This is quickly becoming the story of my life!

I stopped charging my tornado batteries shortly after the Buzz I borrowed from Wharf arrived and haven't had a need to charge them since the Buzz Pro's got here..., Guess when the hubby gets home I will try it on his BP and see if it works there.

Moo it could be a bad carto causing your batts to drain fast ! they do short out from time to time so keep that in mind as well .

 

[BuzzKill]

I have 10 tanks being made in anodized aluminum like the Buzz Pro look we will see how they work out , everybody is making them now so !

 

[moorea]

Moo it could be a bad carto causing your batts to drain fast ! they do short out from time to time so keep that in mind as well .

Mike are you talking about the carto that was not working? Or the carto I have been using for about 4 days now which seems to be working fine? The carto that was not working was just fixed by my husband, he raised the screw in the top cap a bit and now it works!

If it is the carto that I have been using that seems to work and it is "bad" should I stop using it. I don't want to hurt my Buzz... Buzz is my friend! Batteries I don't care about that much, but Buzz I do!

 

[Rosco]

It seems to me if you are thinking about trying boges... you might as well try them with the tank as that is what is sold with the tank anyway, just my novice thoughts!

I have been really wanting to stop using the LR cartos based on all I have read here, but everytime I try something does not work right. Last night I got my new tank that I was going to use a backup or for different flavors or whatever.... So I grabbed one of the regular fusions my husband slotted for, put it in the extra tank, filled it and let it sit over night. This morning I put the tank with the regular fusion onto my BP, but it is not firing! But the other tank back on and it works fine. If this is a center post problem, can someone please explain to me (using very small and simple words) how to fix it!

Sounds familiar Moo....I've had that happen exactly more than once cuz of center post problems.
Doing what Pro Bov said worked for me each time.

And......you can't reallly hurt a Buzz......

 

[moorea]

I have 10 tanks being made in anodized aluminum like the Buzz Pro look we will see how they work out , everybody is making them now so !

Very cool, something else to buy from notcigs! Any chance you will sell the fusions at any point, then I am down to just notcigs and my juice vendor!

Sounds familiar Moo....I've had that happen exactly more than once cuz of center post problems.
Doing what Pro Bov said worked for me each time.

And......you can't reallly hurt a Buzz......

I can break anything... if it is unbreakable!

This regular fusion (as oposed to the LR I've been using) is REALLY tight! Is it the cartomizer or the tank. The LR's draw is no where near as tight!! And the regular seems to be sucking up juice like it is in a desert. With the LR Fusion, you can't see the juice reduction in the tank from hit to hit, with the regular one you take a hit off it and the tank is visibly lower. Again is this the tighter tank or a difference in LR or Regular?

 

[5cardstud]

I bought about $20.00 worth of stuff to make a tank with and I'll be darned if the clear tank I was going to use was glass. It looked just like plastic but as it hit the cement in the shop it broke like glass.

It all worked out though because my Map/Fusion tank is flawless. It really works so darn good I can't believe it.

 

[El Dee]

After everything I heard about the Fusions....well my results were not so good...Now I'm hearing they're offered in LR and I think my problemo has surfaced....I'm gonna take one too the shop too slot....I'll check the resistence at that time..Always seemed too dang hot.....No way would I order LRs but I'm betting that's what I got...Never spoke w/Issac and hey...I coulda clicked the wrong box..

I got the Liquinator...Using the supplied Boge....Wharf...Brutherr order up...I can find nothing wrong with the set-up...Vapor galore!!!!!!!!!! The Buzz Pro lasts all day and now I don't have too drag that dang juice everywhere...You know how much time that saves??? I'm a good 8 hours on this tank and it's still 1/2 full...HellYeah!!!!!!!!!!!!!!!!!!!!!

Moo...The Ming fits the Boge in the tank...The Boge does not fit flush in my tank...I've not measured tanks too see if they're the exact same...It fits as is but a little trim and it would be very nice on a tank...I slid the Boge out of my second tank and inserted a Fusion...It's recessed a little farther than the Boge and the tip did not fit correctly...A flush fit would make for a super set-up...

 

[Pokeygizmo]

I got the Liquinator...Using the supplied Boge....Wharf...Brutherr order up...I can find nothing wrong with the set-up...Vapor galore!!!!!!!!!! The Buzz Pro lasts all day and now I don't have too drag that dang juice everywhere...You know how much time that saves??? I'm a good 8 hours on this tank and it's still 1/2 full...HellYeah!!!!!!!!!!!!!!!!!!!!!

That's excellent news, ElDee! Very glad to hear it!

 

[Rosco]

After everything I heard about the Fusions....well my results were not so good...Now I'm hearing they're offered in LR and I think my problemo has surfaced....I'm gonna take one too the shop too slot....I'll check the resistence at that time..Always seemed too dang hot.....No way would I order LRs but I'm betting that's what I got...Never spoke w/Issac and hey...I coulda clicked the wrong box..

I got the Liquinator...Using the supplied Boge....Wharf...Brutherr order up...I can find nothing wrong with the set-up...Vapor galore!!!!!!!!!! The Buzz Pro lasts all day and now I don't have too drag that dang juice everywhere...You know how much time that saves??? I'm a good 8 hours on this tank and it's still 1/2 full...HellYeah!!!!!!!!!!!!!!!!!!!!!

Moo...The Ming fits the Boge in the tank...The Boge does not fit flush in my tank...I've not measured tanks too see if they're the exact same...It fits as is but a little trim and it would be very nice on a tank...I slid the Boge out of my second tank and inserted a Fusion...It's recessed a little farther than the Boge and the tip did not fit correctly...A flush fit would make for a super set-up...

Glad to hear ur liking that tank LD...I've been on it 100% for 10+ days now with countless refills and the same original carto.

 

[Bovinia]

Very cool, something else to buy from notcigs! Any chance you will sell the fusions at any point, then I am down to just notcigs and my juice vendor!



I can break anything... if it is unbreakable!

This regular fusion (as oposed to the LR I've been using) is REALLY tight! Is it the cartomizer or the tank. The LR's draw is no where near as tight!! And the regular seems to be sucking up juice like it is in a desert. With the LR Fusion, you can't see the juice reduction in the tank from hit to hit, with the regular one you take a hit off it and the tank is visibly lower. Again is this the tighter tank or a difference in LR or Regular?

Moo the Fusions are made just for Isaac so he's the only one you can get them from. The tight draw is just a variance in the carto threads. This is why I prefer using an adapter that has adjustable air flow. I used to hate adapters too but I got over it

 

[Modrod.]

I have 10 tanks being made in anodized aluminum like the Buzz Pro look we will see how they work out , everybody is making them now so !

You got my attention. What type of carto are you building them for. I've been thinking of getting a CE2 tank.

 

[5cardstud]

You got my attention. What type of carto are you building them for. I've been thinking of getting a CE2 tank.

Mine too.



ֹ

 

[moorea]

Moo the Fusions are made just for Isaac so he's the only one you can get them from. The tight draw is just a variance in the carto threads. This is why I prefer using an adapter that has adjustable air flow. I used to hate adapters too but I got over it

The variance you are reffering to, is that variance from the LR Fusion to the Regular or can there be a variance from a Regular Fusion to a Regular Fusion? One day someone will write "vaping for dummies" just for me.

I'll think about an adapter!

You got my attention. What type of carto are you building them for. I've been thinking of getting a CE2 tank.

A tank from Mike is very exciting. I tried a few CE2 tanks. They rocked the first day and by day two the performance dropped dramatically, they were very girgly and more often then not I got a mouth full of liquid!

 

[moorea]

Hey has anbody tried this:

http://www.ikenvape.com/store/atomizers/Stealth%20Series?product_id=117

I'm purchasing some more fusions today so I can have a little backup stock of them. I am thinking about getting one of these as well for the now and again that I want to test a new flavor or in the event that a fusion dies suddenly and I am waiting on another to soak up juice. Are they any good? Do they last a while. Also, all the others tell you what size drip tip they take, this one does not, so is it an 801 (example the LR one says it uses a 901 drip tip...)

 

[Modrod.]

A tank from Mike is very exciting. I tried a few CE2 tanks. They rocked the first day and by day two the performance dropped dramatically, they were very girgly and more often then not I got a mouth full of liquid!

CE2's do take some time to adjust to but the clean flavor is what I like about them. You can't draw on a CE2 as hard as you would on filler carto's. A light draw to pull in the vapor is all that's needed. I also like them because you can clean and reuse them easily. I get a month or more out of them before I need to switch to new one.

 

[Bovinia]

Moo, the variance is just from carto to carto. It just happens sometimes in the manufacture process.

 

[moorea]

Thanks Bov! I will consider an adapter, but maybe I'll wait in see if another has that tight draw. I wonder if making the little air holes at the bottom a bit bigger would fix it. Yes, I am still being difficult about the adapter, I like my buzz just the way it is. Besides now would I need to adapter, and 801 - X then X - 801????

On a side note, let me take this moment to rant. I am happy my mom is using a buzz and trying not smoke, but she is driving me crazy. I am already responsible for figuring out all my husbands questions and problems, but figuring out vaping for three is a burden. When her liquinator did not work I gave her a clear dual coil carto to use while she waited for the new liquinator. I sat her down and gave her a lesson on how to fill it, the next day she called me and asked, wouldn't it be easier if I could just remove the "black filter" on top (after a few moments I realized we were talking about the drip tip) and fill it from there, rather then trying to fill it from the little tiny hole at the bottom. She was actually trying to fill the carto through the battery screw.... Next she called insisting that someone come right over her Buzz stopped working. All it needed was a battery change. Then the liquinator arrived, we gave her a new fill lesson, but the next day we had to go fill it for her again.

Todays problem, the wheel is no longer adjusting and someone needs to come over and figure out why. I guess it is to low and won't adjust up. She thinks that turning the screw above the wheel will help. I told her not to as I do not think that is what that screw is for (the same screw was on the original Buzz and there was no wheel, so I am doubting that screw will fix the wheel)

I am thinking she has some h0w managed to kill the carto after 2 days use! I'm heading over there soon. I'll bring the voltage meter and test the carto, but if someone has a better idea... please share!

 

[Bovinia]

LOL Moo! I guess you have to take the bad with the good If she couldn't figure out how to fill her carto then it's quite possible that she killed it. Good luck with your mom!

What fitting do you have on your top cap? I guess I've been sitting on my brain! You can "wallow" out the the air holes on your carto a little. I've never used an 801 top cap so I don't know what they look like, but if there is an o-ring around the threads (like on the 901) you can pop it off to get more air flow probably.

 

[moorea]

Nope Mom's new Boge carto was fine! She never actually filled this one herself, we filled it when the new liquinators arrived. Somehow she managed to spin the wheel on the BP to far past the stopping point and got it stuck there... The hubby gave it a good hard turn to get it back where it is supposed to be and the wheel spins fine again in both directions. And the Buzz Pro is back to working again! I can't imagine what tomorrows "it doesn't work" phone call will be!

I don't see an o-ring... But I am happy with the fusion that is in there now! I am hoping the really tight fusion I tried was a one time thing. That being said it wasn't bad... just tight. If I come across another I will stop being stuborn and get an adapter.