Cartoz carts E2's etc. post it here

Status
Not open for further replies.

ejoker

Vaping Master
ECF Veteran
Verified Member
Jan 15, 2010
6,586
844
i do indeed (a few actually).

holds 5ml, so no need to carry a bottle (at least for a day). easy to fill - i use a blunt syringe.
like the e2, no leaking. unlike the e2, it wicks fast enough to take 5 long draws one after another. some folks have added additional wick to it, but i haven't had the need.
its not dripping, but pretty darn close.
changing the 2e inside takes all of 5 minutes.
if i remember correctly, i've been using the 2.8ohm at 5.2v and diggin it.
 

jdubious

Ultra Member
ECF Veteran
Verified Member
Jul 28, 2010
1,867
6,505
Coppell, TX
i do indeed (a few actually).

holds 5ml, so no need to carry a bottle (at least for a day). easy to fill - i use a blunt syringe.
like the e2, no leaking. unlike the e2, it wicks fast enough to take 5 long draws one after another. some folks have added additional wick to it, but i haven't had the need.
its not dripping, but pretty darn close.
changing the 2e inside takes all of 5 minutes.
if i remember correctly, i've been using the 2.8ohm at 5.2v and diggin it.

Did you buy yours from CoV or make it yourself? I considered buying one from CoV but $30 seems pricey. I'd like to make some but am not sure where to get the stuff needed.

I have been using the stormy clear tube mod almost exclusively since I tried it. Its gonna be hard to get me to switch to something else as they work to my liking.

I recently ordered up some Fluxomizer clear 808 XLs @ 2.8-3.0 ohms. Its been hit or miss so far. If you can get one working like its supposed to then they work great. Also, I had to modify my Buzz 808 top cap to get ANY airflow through them.

Yet to try any of the new IKV stuff. but so far I've had no luck with anything with filler material or with dripping.
 

5cardstud

ECF Guru
ECF Veteran
Verified Member
Jan 1, 2010
22,746
50,647
Wash
i do indeed (a few actually).

holds 5ml, so no need to carry a bottle (at least for a day). easy to fill - i use a blunt syringe.
like the e2, no leaking. unlike the e2, it wicks fast enough to take 5 long draws one after another. some folks have added additional wick to it, but i haven't had the need.
its not dripping, but pretty darn close.
changing the 2e inside takes all of 5 minutes.
if i remember correctly, i've been using the 2.8ohm at 5.2v and diggin it.

Well thank you compadre. I'll have to get one of those. That was a great little piece of info.
I filled another Fluxomizer up and the vapor was immense but the taste was non existent like the E2. I'm going to let it sit and see what happens.
 
Last edited:

VanderVape

Moved On
Nov 17, 2010
1,106
3
Wyoming
Ok guys. I have the COV clearomizers 510 2.4 ohm. Ones. I like them and so far we have had only one that wouldn't get the burnt atty taste off of it. Still im going to try to clean it again and see if it works. I like these like I said, but I do have a gripe. Filling them is a pita. If you want to fill them by bottle then you have to take them almost totally apart. That one plastic ring can be a lot of work to get off there, and back on from experience, broke the ceramic ring on one, tore the little pplastic cap on another. If your out and about needing to fill it you still have to take things off and then get a needle and syringe and fill it that way. That's a pain too.
I want something simple and not messy. I don't want to have to get my juice out all the time to refill or drip. I can't afford to be buying all different types of things.
Seriously im thinking of getting some mega stuff for my egos and being done with it. :(
 

Sugar_and_Spice

ECF Guru
ECF Veteran
Verified Member
Sep 11, 2010
13,663
35,225
between here and there
Shel,
I have some friends that are scared to 'death' of having the ejuice 'touch' them as they think that they will overdose on nic. To those friends I try to help them find vendors that sell pre-filled cartos. Of course, you won't get the benefit of all of those other vendors whose juices are wonderful and so it does limit ones choices in juice. Have you tried filling several to take with you when you are out and about? I wish there was an easier and less messy option, but so far I haven't found it. imo, it is a small price to pay for finally being analog free.
wv:)

ps I use the eGO mega cartos and love the taste on some of my juices. They too need a syringe to fill.
 

VanderVape

Moved On
Nov 17, 2010
1,106
3
Wyoming
Shel,
I have some friends that are scared to 'death' of having the ejuice 'touch' them as they think that they will overdose on nic. To those friends I try to help them find vendors that sell pre-filled cartos. Of course, you won't get the benefit of all of those other vendors whose juices are wonderful and so it does limit ones choices in juice. Have you tried filling several to take with you when you are out and about? I wish there was an easier and less messy option, but so far I haven't found it. imo, it is a small price to pay for finally being analog free.
wv:)

ps I use the eGO mega cartos and love the taste on some of my juices. They too need a syringe to fill.

Well I had only first purchased a pack of these, but may be getting more. It may be something that I will need to do is pre-fill a couple of them with what I am vaping so that I don't have to worry about carrying juice or the syringe. You have a very good point my friend on it being a small price to pay to be off analogs. Hum... I could fill and mark them on my good days when I have had enough sleep. lol It's never good to be crazy tired and try to fill a carto with an 18 gauge needle. lol

Oh and I bought a couple of syringes yesterday and some 18 gauge needles. The juice doesn't pull up into the syringe unless I get some and move the needle to where it can get some air. I know I read somewhere the issue with this, but brain has run away from me yet again and the cat keeps batting it around the house.
 

5cardstud

ECF Guru
ECF Veteran
Verified Member
Jan 1, 2010
22,746
50,647
Wash
and buzzkill, since you asked, i'm also a fan of the bulli a1, and have an a2 en route.

Ejoker they just keep getting bigger. I'm going to beat the rush and just get one of these.
bxp28244.jpg
 

Sugar_and_Spice

ECF Guru
ECF Veteran
Verified Member
Sep 11, 2010
13,663
35,225
between here and there
Well I had only first purchased a pack of these, but may be getting more. It may be something that I will need to do is pre-fill a couple of them with what I am vaping so that I don't have to worry about carrying juice or the syringe. You have a very good point my friend on it being a small price to pay to be off analogs. Hum... I could fill and mark them on my good days when I have had enough sleep. lol It's never good to be crazy tired and try to fill a carto with an 18 gauge needle. lol


Oh and I bought a couple of syringes yesterday and some 18 gauge needles. The juice doesn't pull up into the syringe unless I get some and move the needle to where it can get some air. I know I read somewhere the issue with this, but brain has run away from me yet again and the cat keeps batting it around the house.

Shel,
Try pulling the juice with the plunger part without the needle attached. Much easier. Then put the needle on. I always made a hugh mess when I tried to pull juice through the needle and never could get a good enough draw.
:)
wv
 

5cardstud

ECF Guru
ECF Veteran
Verified Member
Jan 1, 2010
22,746
50,647
Wash
You could also get one of these.
sprayer.jpg


I have no luck with the E2 I got some and tried everything I read, even the syringe mod and they still taste very bad, what do you guys did to them. I know that there is a thread here but is 2 miles long and I have not find the answer. Please help me or I will kill myself dripping @ 70 mph
Just get some Fusion cartos or the drip tip cartos from Ikenvape when he gets them back in stock. I use the drip tip 510s he sells like regular cartos.
The E2s both stainless and the clear ones are like Chevy 409s. If you get a good one they are great, but if it's a bad one you might as well use it as a boat anchor.
 
Last edited:
Status
Not open for further replies.

Users who are viewing this thread