Cartoz carts E2's etc. post it here

Status
Not open for further replies.

trovatur

Super Member
ECF Veteran
Verified Member
Apr 22, 2010
392
32
West Palm Beach, FL
You could also get one of these.
sprayer.jpg



Just get some Fusion cartos or the drip tip cartos from Ikenvape when he gets them back in stock. I use the drip tip 510s he sells like regular cartos.
The E2s both stainless and the clear ones are like Chevy 409s. If you get a good one they are great, but if it's a bad one you might as well use it as a boat anchor.

thanks 5c
the Premium IKV 510 Cartomizer (Soft-tipped) Platinum will work?
 

5cardstud

ECF Guru
ECF Veteran
Verified Member
Jan 1, 2010
22,746
50,647
Wash
thanks 5c
the Premium IKV 510 Cartomizer (Soft-tipped) Platinum will work?

I haven't tried them ones. I was referring to the ones he calls the 510 drip tip cartomizer. They are out of stock right now and you can order them without the tip. I use them like regular cartos, I don't drip with them.
 

IndustrialAction

Ultra Member
ECF Veteran
Sep 14, 2010
1,373
13
Northern VA
I haven't tried them ones. I was referring to the ones he calls the 510 drip tip cartomizer. They are out of stock right now and you can order them without the tip. I use them like regular cartos, I don't drip with them.

Yeah, I wouldn't try dripping with them. Half the juice will run out the center tube before you ever soak the fibers.
 

jdubious

Ultra Member
ECF Veteran
Verified Member
Jul 28, 2010
1,867
6,505
Coppell, TX
I have no luck with the E2 I got some and tried everything I read, even the syringe mod and they still taste very bad, what do you guys did to them?. I know that there is a thread here but is 2 miles long and I can't find the answer. Please help me or I will kill myself dripping @ 70 mph :(

With the syringe mod, I cut the wicks nearly flush with the cup, then push strips of folded PTB neatly inside making sure the tops are in contact with the little wick stubs. Fill 'er up and seal it with one of the white end caps. I then cut piece of the left over SS tube about 1/2", install a drip tip and insert that assembly as a mouthpiece. With darker/thicker fluids I prefer to disassemble the whole thing, rinse and dry burn after about a day of use. But with clear/thinner fluid I can keep refilling and using for a week or more. If I hit it a little too hard and notice drop off in performance I flip the unit upside down and let the fluid saturate the wicks(this takes like 2 secs).

For the first time I feel comfortable leaving the house with nothing but a filled carto and my buzz. Also, I have several that I've been using for weeks now, the flavor is the same as new and still blowing clouds.
 

trovatur

Super Member
ECF Veteran
Verified Member
Apr 22, 2010
392
32
West Palm Beach, FL
With the syringe mod, I cut the wicks nearly flush with the cup, then push strips of folded PTB neatly inside making sure the tops are in contact with the little wick stubs. Fill 'er up and seal it with one of the white end caps. I then cut piece of the left over SS tube about 1/2", install a drip tip and insert that assembly as a mouthpiece. With darker/thicker fluids I prefer to disassemble the whole thing, rinse and dry burn after about a day of use. But with clear/thinner fluid I can keep refilling and using for a week or more. If I hit it a little too hard and notice drop off in performance I flip the unit upside down and let the fluid saturate the wicks(this takes like 2 secs).

For the first time I feel comfortable leaving the house with nothing but a filled carto and my buzz. Also, I have several that I've been using for weeks now, the flavor is the same as new and still blowing clouds.

Thanks Jdubious,
I will have to try that, but my wife says " No more lab time this week" I spent hours trying to make them work and mixing my juice. Hopefully she'll let me use my lab/office this weekend :)
 
Last edited:

5cardstud

ECF Guru
ECF Veteran
Verified Member
Jan 1, 2010
22,746
50,647
Wash
Last edited:

El Dee

Ultra Member
ECF Veteran
Verified Member
Apr 1, 2010
1,700
12,261
65
DIXIE
OK now I've just set a new world record....I managed to throw one of those clear-o-misers about 1/2 mile...Dangitt if my drip tip wasn't still on there.....I'm gonna miss that tip....Really now I've just given it another go...that sealing ring is dang near impossible to get back in...It will blow clouds and then.....well...come on now.....sometime today...NOTHING!!! Way too much hassle for the return...I'm through with that BS..........

The bottom line.....I want too plug and play.....I have pushed in excess of 30MLs of juice through a IKV Mega 808....It's a great carto...A solid performer...you will give up a little flavor but it does everything else like a champion.....and holds 50/60 drops of juice....

The 801 Fusion does everything the Mega does with a little less life and a little less capacity...The flavor kicks and don't get me wrong they still outlast everything but a mega.. I'd say it's the best carto out there right now....

I posted last night about the perpetual drip I use on the cartos...No leakage here...but I drip at an angle and rotate it to keep it out of the center hole...My next order will be IKV 901 HV,,,IKV 510 Drip-Tips,,,and last but not least IKV 801 Fusions....
 

trovatur

Super Member
ECF Veteran
Verified Member
Apr 22, 2010
392
32
West Palm Beach, FL

5cardstud

ECF Guru
ECF Veteran
Verified Member
Jan 1, 2010
22,746
50,647
Wash
OK now I've just set a new world record....I managed to throw one of those clear-o-misers about 1/2 mile...Dangitt if my drip tip wasn't still on there.....I'm gonna miss that tip....Really now I've just given it another go...that sealing ring is dang near impossible to get back in...It will blow clouds and then.....well...come on now.....sometime today...NOTHING!!! Way too much hassle for the return...I'm through with that BS..........

The bottom line.....I want too plug and play.....I have pushed in excess of 30MLs of juice through a IKV Mega 808....It's a great carto...A solid performer...you will give up a little flavor but it does everything else like a champion.....and holds 50/60 drops of juice....

The 801 Fusion does everything the Mega does with a little less life and a little less capacity...The flavor kicks and don't get me wrong they still outlast everything but a mega.. I'd say it's the best carto out there right now....

I posted last night about the perpetual drip I use on the cartos...No leakage here...but I drip at an angle and rotate it to keep it out of the center hole...My next order will be IKV 901 HV,,,IKV 510 Drip-Tips,,,and last but not least IKV 801 Fusions....

I agree El Dee. I mean if you buy a product you have to dismantle and rebuild it plus wash and rinse the parts just to blow out vapor that has less flavor than the fusion has somethings not right. Oh and I forgot you have to do a tear down and get out the tool box to fill it too. You would think as much as they been working on that thing it would be farther along. My second one has given me a headache everytime I try to use it. You may be able to go along time between refills but if you figure in all the cutting, clipping, plugging and filling your really not ahead.
 

Sorrid

Super Member
ECF Veteran
Oct 15, 2010
465
26
Tampa,Florida
I don't bother syringe filling CE2s. I use the little green screwdriver that came with my Buzz and gently work that inner ring off the atomizer cup and fill directly from a bottle. Getting that inner ring off the first time is a little hard but it is a breeze afterwards once you get a little juice in there to lube it up a bit.

Just let the juice run down the side of the carto and it will fill right up and then pop that inner ring back on and plug in a drip tip of your choice. It isn't any more difficult than condom filling any other cartomizer and takes about the same amount of time. The only time I notice any juice getting in my mouth is if I leave the Buzz laying on it's side for too long and then it is only sometimes I might taste a little juice.

That seems to work best for me for filling the CE2s. I hope Isaac gets some stock soon as I've been dying to try the 801 fusions and the v2 510 drip cartomizers.
 
Last edited:

Bovinia

Divine Bovine
ECF Veteran
Jul 17, 2010
14,449
50,826
65
South Carolina
5cs your sig is KILLIN ME !! Buzz Saw LMAO !!!

I am coughing up a LUNG today ! I dont know if I am getting sick or ?? but the last 2 days have been vaping crap ? I tried everything I know and it is not working ,. I must be coming down with something DAMN !

Damn Mike, hope you feel better soon!

I agree with all of you...way too much hassle for me. That's why I'm sticking with what's been working for me. If it ain't broke, don't fix it!
 

5cardstud

ECF Guru
ECF Veteran
Verified Member
Jan 1, 2010
22,746
50,647
Wash
5cs your sig is KILLIN ME !! Buzz Saw LMAO !!!

I am coughing up a LUNG today ! I dont know if I am getting sick or ?? but the last 2 days have been vaping crap ? I tried everything I know and it is not working ,. I must be coming down with something DAMN !

I just got over a throat infection a week or so back. It was a doozy. I thought it was strep but it wasn't. The doc sais strep is easy to get rid of but there are some going around that are pretty tough to deal with. That Buzz saw is just there for a minute till I get another one done. I said I came, I SAW, I cconqered.

I don't bother syringe filling CE2s. I use the little green screwdriver that came with my Buzz and gently work that inner ring off the atomizer cup and fill directly from a bottle. Getting that inner ring off the first time is a little hard but it is a breeze afterwards once you get a little juice in there to lube it up a bit.

Just let the juice run down the side of the carto and it will fill right up and then pop that inner ring back on and plug in a drip tip of your choice. It isn't any more difficult than condom filling any other cartomizer and takes about the same amount of time. The only time I notice any juice getting in my mouth is if I leave the Buzz laying on it's side for too long and then it is only sometimes I might taste a little juice.

That seems to work best for me for filling the CE2s. I hope Isaac gets some stock soon as I've been dying to try the 801 fusions and the v2 510 drip cartomizers.

Well if I use these clears again I will have a plug or screw in the side of it to fill it with. But before you can use them right you have to do a bunch of stuff. Ejoker said the MAP is pretty cool so I might try one of those.
 

5cardstud

ECF Guru
ECF Veteran
Verified Member
Jan 1, 2010
22,746
50,647
Wash
Damn Mike, hope you feel better soon!

I agree with all of you...way too much hassle for me. That's why I'm sticking with what's been working for me. If it ain't broke, don't fix it!

Now that's a smart women. Give that lady a cigar. Everyone vapes differnt and what works for one doesn't always work for the other. I use what I do because it works for me.
 

Wharf Rat

Vaping Master
ECF Veteran
Aug 31, 2010
8,529
29,147
68
Fresno, Ca
www.gratefulvaper.com
I have the clear from gotvapes. Great VP when I can get them working. 1 worked great but leaked, 2 on and off burnt taste and this last 1 on and off and leaks.
But for those who do like them, I got this from Johnson Creek.
4ce3e9c5-7849-15a7.jpg

I fill with 3 or 4 ml and the plastic needle fits into the cart perfectly. I could top off or re-fill quickly.
Thought some might want to know.
 
Last edited:
Status
Not open for further replies.

Users who are viewing this thread