The stealth thing isn't really worth it; for one thing, I don't really mind if people know I'm using an adaptor; for another, you just about need a strap wrench to get the little SOB separated from the carto.
Cartoz carts E2's etc. post it here
- Thread starter BuzzKill
- Start date
- th_trl_thread_readers 0
- Status
I got my adapter and trying out the Fusions. I gotta say I'm likin them. I may be trading in my DC's
I tried a DC a while back (before I got a buzz) and didn't really like it. After I got the Buzz I first tried the Boges, they were OK, but since I tried the Fusions I need nothing else. I wonder if anyone sells the fusions pre-slotted so you can try them in a tank. Did you ever pick up a tank or did you decide to wait on the one notcigs is making? Let me know and I will send you a couple of pre-slotted fusions to try in a tank (now or when you get them).
I decided to wait on the notcigs one. Thanks I would love to try one in a tank. I really like the fusions. I only been using it for a hour but really like it alot
Well if you still like the fusions when notcigs tank comes out, remind me and I will have the hubby slot up a few extras for you! I know how you feel about using tools!
Isaac has those Fusions made special for him, moorea. I don't believe he has let anyone else sell them, at least not to my knowledge.
I'm pretty sure we all are stuck slotting our own for now.
Last edited:
Yeah, I figured that. That is why I offered to have the hubby slot some for Kellie. But first she has to get a tank!
When Kellie gets a tank, I'll send her a few slotted (or actually now I guess they are punched holes) fusions to try. You know it won't be long before she is posting for someone to teach her how to use a dremel!
Last edited:
OK, it has been over 2mo's since I found you guys. I've read everything you have had to say about LR vs. regular cartos. It sounds logical, and I really want to kick the LR habbit. If it is easier on my Buzz and my batteries will last longer why not?
And if I am understanding correctly the regular ones will last longer then the LR's so that is good to. But I must be doing something wrong.
Tonight I pulled out one of the few regular fusions I had. I tested it as well as the LR I pulled off. The LR metered at 2 ohms the regular at 3 ohms. I put about 25 drops in, refilled my tank and took a vape. I did not change my voltage. The dial was on the yellow mark.
The first vape there was no throat hit and just about zero vapor. So I turned it up (probably to much) to the pruple mark. The second vape was way to harsh and a little more vapor but not what I get from the fusions, so back down it went to the yellow mark. I have been using it at the yellow mark for about an hour now. And after the carto broke in a bit, I am finding it harsher at the yellow mark then my LR was, but still less vapor!!
Shouldn't the regular be less TH at the same voltage? I assume that turning it up will produce more vapor, but it would be followed by a 3 minute coughing fit. Is there normally less vapor with a regular fusion? Does it just need a little more break in time?
Is there a formula to find the voltage that will give the same TH and Vapor at 3 ohms that I was getting at 2 ohms?
The big question is, do the regular fusions really last longer then the LR's? If not I might just have to go back to my 2ohm fusions and hang my head low each time I see 5card tell someone that once you get a Buzz you do not need LR's anymore!!
And if I am understanding correctly the regular ones will last longer then the LR's so that is good to. But I must be doing something wrong.
Tonight I pulled out one of the few regular fusions I had. I tested it as well as the LR I pulled off. The LR metered at 2 ohms the regular at 3 ohms. I put about 25 drops in, refilled my tank and took a vape. I did not change my voltage. The dial was on the yellow mark.
The first vape there was no throat hit and just about zero vapor. So I turned it up (probably to much) to the pruple mark. The second vape was way to harsh and a little more vapor but not what I get from the fusions, so back down it went to the yellow mark. I have been using it at the yellow mark for about an hour now. And after the carto broke in a bit, I am finding it harsher at the yellow mark then my LR was, but still less vapor!!
Shouldn't the regular be less TH at the same voltage? I assume that turning it up will produce more vapor, but it would be followed by a 3 minute coughing fit. Is there normally less vapor with a regular fusion? Does it just need a little more break in time?
Is there a formula to find the voltage that will give the same TH and Vapor at 3 ohms that I was getting at 2 ohms?
The big question is, do the regular fusions really last longer then the LR's? If not I might just have to go back to my 2ohm fusions and hang my head low each time I see 5card tell someone that once you get a Buzz you do not need LR's anymore!!
Moo I use the regular Fusions and get tons of vapor and flavor. That said, there is no reason for you to worry about 2.0 ohms vs. 3.0 ohms! If you like the lower resist ones better then use them!! Everyone's vaping style and taste is different and the BP is built to handle it.
Thank you Moo. Can ya see me slotting cartos, I would be missing fingers lol. I can't even tighten a screw right
Now I am gonna have to try the LR Fusions too. I am getting really sold on these Fusions
Now I am gonna have to try the LR Fusions too. I am getting really sold on these Fusions
Thank you Moo. Can ya see me slotting cartos, I would be missing fingers lol. I can't even tighten a screw right
Now I am gonna have to try the LR Fusions too. I am getting really sold on these Fusions
I'm Very glad you like them Kellie. They are my fav and seem to last forever in a tank. I finally changed mine after a month but it really didn't need to be changed.
I'm Very glad you like them Kellie. They are my fav and seem to last forever in a tank. I finally changed mine after a month but it really didn't need to be changed.
I have only been using them for a day but wow they are really great. Thanks for sending me a pack to try
Moo I use the regular Fusions and get tons of vapor and flavor. That said, there is no reason for you to worry about 2.0 ohms vs. 3.0 ohms! If you like the lower resist ones better then use them!! Everyone's vaping style and taste is different and the BP is built to handle it.
The main reason I want to change is the 2's I have are very inconsistent as far as how long they last. A few have lasted a little over a week, but more often 2 - 3 days is it. If the 3's last longer it would be nice to save a few dollars. I just can't dial it in to my sweet spot with the 3's. It does have more vapor today, maybe it just needs a little more time to get going! I am going to keep using it until it dies and see if I can't figure it out.
Thank you Moo. Can ya see me slotting cartos, I would be missing fingers lol. I can't even tighten a screw right
Now I am gonna have to try the LR Fusions too. I am getting really sold on these Fusions
Just let me know when you get a tank! I'll send a few and if you like the fusions in the tank (and I can't see how you won't if you like them off the tank) we'll make sure your fusions slotted one way or another.
Awwww I love you guys I can always count on you guys to help me out. I am proud to be part of the family
I can always count on you guys to help me out. I am proud to be part of the family
I hear ya Moo, they should be lasting longer than that. Only other thing I can think of is the juice. I know that KBV has some juices that turn very dark as they age and altho I liked several of them, they gunked up my cartos. I would have to ream out the center with a needle every couple of days.
- Status
Similar threads
- Locked
