Chi you Clone from AKA Vapers (Hcigar)

[dw'struth]

I finally got my $27 fasttech Chi You Clone, I couldn't be more pleased on all counts with the exception of that short telescoping adjustment screw. With my "nipple tops" 18650's (Efest Panny 2250's) all is well but with MNKE and Sony 18650 flat tops there is just not enough length on the screw to allow their use. I will have to locate another screw. Again I am really happy with the build on this.

I just measured the voltage between the fire button and the base of my 0.7 Ω Fogger during firing and got almost nothing, 0.05 volts, I'm getting 0.16 volts when checking my GGTS clones

Now you need to get the brass one! I love my SS model, but a little less since I got my brass one. It just hits harder. Actually, to the point that I almost feel that my SS has misteryously developed a problem somewhere. I need a tank-o-meter bad!

I can barely stand to use my FT Ithaka on the SS at only 1 ohm, but it rock and rolls on the brass one. On simple devices like these.....it either fires or it don't. Right? If its firing, could it possibly be losing power somewhere?

 

[mrfixit]

I have the brass clone version and it performs well without any modding at all. A little bit of info about the real one the logo on it isn't mojos it is a Korean soccer associations copy writed mascot which he used without permission. The "real one" is also a copy of two different mods the switch is a copy of the caravellas switch and air control is from the ggts. Really though who cares as long as it keeps you off tobacco its all good.

 

[chadsmo]

So I took my bottom secondary screw for adjusting battery rattle because I need to for some attys and my 18500. Now I can't find it (I think a child got to it >: ) Anyone know what size the threading is or if there's replacements to be had somewhere.

 

[dwcraig1]

So I took my bottom secondary screw for adjusting battery rattle because I need to for some attys and my 18500. Now I can't find it (I think a child got to it >: ) Anyone know what size the threading is or if there's replacements to be had somewhere.

These are used for mounting a motherboard to the case as well as providing a place for the cables plugs to screw into the cards on the back of a computer. There are 3 or 4 sizes of them though. I had to cut it down on both ends also.

Here is a link to my post on it: http://www.e-cigarette-forum.com/fo...sttech-more-battery-warning.html#post10907732
I'm going to guess at the size M2 X .4 mm ( I don't think that it is .45 after all )

 

[fooey]

Dang I got flat tops and my cyc coming tomorrow. I guess I will need to use magnets

Sent from my Evo 3D CDMA using Tapatalk 2

 

[fooey]

How was your 510 connector?

Sent from my Evo 3D CDMA using Tapatalk 2

 

[dwcraig1]

Dang I got flat tops and my cyc coming tomorrow. I guess I will need to use magnets

Sent from my Evo 3D CDMA using Tapatalk 2

If your atty's post either sticks out a bit or is adjustable then you can get to work just fine since the 510 adjustment screw will be out some also.
Example as seen with KFL,

 

[dwcraig1]

How was your 510 connector?

Sent from my Evo 3D CDMA using Tapatalk 2

The threading inside my CYC's 510 is right on.

 

[fooey]

Thanks looking forward to mine! I was reading the reviews and was thinking I should have bought the chemesis because of the 510. Hope I got a good one like yours

Sent from my Evo 3D CDMA using Tapatalk 2

 

[CaliGrower]

as ive stated before, i think the whole "clone" thing is BS....i think what happens is the modders make this stuff, run a few and sell them at absolutely STUPID prices, then when the sales start to really fall off they go to these other companies and have them duplicate the product and sell it as clones, and still make money.

gos to show you that even though they put some labor into the deal, the stuff these guys make is NOT worth even CLOSE to what they ask for it.

i bought a real deal chi you, and a clone. the clone was ,believe it or not, IMHO a bit better quality than the original, so i sold the original, bought another clone and used the rest of the money on xmas gifts...LOL......