- Status
Other than that it works great for the price
Sent from my HTC One using Tapatalk 4
Sent from my HTC One using Tapatalk 4
I hope I can get these laser etchings polished/sanded off. I thought it would have a 8888 serial number and/or a misspelling on the button, marking it as an obvious clone. It's my first bottom button mod and I don't care for the placement, but I can't even sell it as is!?!
I don't plan on selling mine ever. My brass one should be here this week or next. Then I can swap and mix with my SS. My 24k Trident clone should be here soon too. That is going on the brass Chi and when I get my Russian 91%, that will be going on the SS Chi.
I'm so jealous of all you guys that got your SS versions already... Mine has been lost at the Post Office since tuesday...
Just got mine in.
Verdict: Pretty damn good.
Threads are nice and smooth, the main logo has a nice feel to it, the adjustable pins work as advertised, and it hits pretty well even with the brass pins.
The only negative I can really give this is that the back etching isn't as deep as the main logo. For the fake serial number, I don't really mind, but I'd rather not lose the Hangul text over time.
In 18350 mode, this thing is really nice and compact. This is my first pinky switch mod, and the form factor is extremely comfortable. I shortened the throw on the bottom switch and am having no problems with misfires or autofiring.
In 18650 mode with my Panasonic CGR18650's, it is indeed autofiring due to the lack of insulation on the negative end of the battery. I'll have to grab some shrink wrap or maybe just try using electrical tape to cover the end to prevent this, but I was aware this could be a problem going in.
All in all, for $27 bucks, this was a nice buy for a beater mod. I won't be using it much besides at home with the Trident and when I'm out drinking with the Russian 91% once my Reo comes in, but all in all I'm happy with the purchase.
Verdict: Pretty damn good.
Threads are nice and smooth, the main logo has a nice feel to it, the adjustable pins work as advertised, and it hits pretty well even with the brass pins.
The only negative I can really give this is that the back etching isn't as deep as the main logo. For the fake serial number, I don't really mind, but I'd rather not lose the Hangul text over time.
In 18350 mode, this thing is really nice and compact. This is my first pinky switch mod, and the form factor is extremely comfortable. I shortened the throw on the bottom switch and am having no problems with misfires or autofiring.
In 18650 mode with my Panasonic CGR18650's, it is indeed autofiring due to the lack of insulation on the negative end of the battery. I'll have to grab some shrink wrap or maybe just try using electrical tape to cover the end to prevent this, but I was aware this could be a problem going in.
All in all, for $27 bucks, this was a nice buy for a beater mod. I won't be using it much besides at home with the Trident and when I'm out drinking with the Russian 91% once my Reo comes in, but all in all I'm happy with the purchase.
That etching is deeper than it appears.
It took me over an hour of constant sanding with 120 grit wet sandpaper, but I got the etchings off the tube and the button. That was with power tools, by hand would have taken many, many hours. I hope I can sell it now without getting a ECF spanking.
It took me over an hour of constant sanding with 120 grit wet sandpaper, but I got the etchings off the tube and the button. That was with power tools, by hand would have taken many, many hours. I hope I can sell it now without getting a ECF spanking.
That blows. I was planning on sanding mine off.
I don't feel like spending that much time, $ and effort to remove the logos.
Wish they didn't put those damn logos on it.
Mine is still in HK - being shipped.
I'll be getting my Sigelei "Bagua" (really looks more like a chi-you - but not a direct clone) within the next few days.
No logos - yay.
Burnt my tube so bad you can hardly tell there's a logo 
Sent from my SAMSUNG-SGH-I747 using Tapatalk 4
Sent from my SAMSUNG-SGH-I747 using Tapatalk 4
The pins dont make that much of a difference in how hard it hits, maybe .05v~
Its based on how well the mod is grounded via threading.
Also going to try this on my chi clone. Wanted to test torching but didnt want to ruin my nemesisBurnt my tube so bad you can hardly tell there's a logo
Sent from my SAMSUNG-SGH-I747 using Tapatalk 4
Great vid! Thanks a bunch. Mine passed through San Fran today, so I should be seeing it on Monday. Just that much more excited now!
The HCigar's Safety Lock extends out past the width of the mod, same as the Fasttech mod (are they even different?)
The real Chiyou is completely flush, which some people dont like because you begin unscrewing the firing pin and it is difficult to access without doing so.
The Fast Tech model is made by Hcigar.
The real Chi-You is made with same protruding lock ring and airflow control ring as the Hcigar.
Mojo also made them available with flush type rings and top cap (Chi Sleek)
Welcome to KoreaVape
https://www.facebook.com/StyleOfMojo?hc_location=stream
Last edited:
- Status
