Sounds about right, good thing they were only 40w you may have gown hurt with a 75w chip.I got smoke out of all three
[CLOSED]
- Thread starter Tbev
- Start date
- th_trl_thread_readers 0
- Status
There's prolly not a lot of wood guys here, but I figured someone wood like something like this.
A squonker you can show off your wood with and not have to worry about it breaking when you drop it or look at it wrong. Haha.
This is a rare maple brown eye zebra foundonmygarage wood.
A squonker you can show off your wood with and not have to worry about it breaking when you drop it or look at it wrong. Haha.
This is a rare maple brown eye zebra foundonmygarage wood.
Contact evolv customer support, evolv is very lenient on board replacements. Evidently they had a problem with their screen supplier keeping up, now they are using 2 companies for screen production. Hopefully this solves the issue.I haven't had any good experience with anything to do with evolve personally. I can't order a new board, they are out of atock, screens too, for the last couple months at least. I will say I'm impressed, it works without a screen at all....and whatever this thing is that fell off the board , well actually fell out into my hand when I pulled the board, who knows how long it has been off the board? There were two on there so I guess it still has half of them. Haha
I haven't had any good experience with anything to do with evolve personally. I can't order a new board, they are out of atock, screens too, for the last couple months at least. I will say I'm impressed, it works without a screen at all....and whatever this thing is that fell off the board , well actually fell out into my hand when I pulled the board, who knows how long it has been off the board? There were two on there so I guess it still has half of them. Haha
Don't know if you are dealing with Evolve on a wholesale basis or not, but Protovapor has the dna40's ( $55.99) and 200's ($79.99) in stock along with charging boards as well...
There's prolly not a lot of wood guys here, but I figured someone wood like something like this.
A squonker you can show off your wood with and not have to worry about it breaking when you drop it or look at it wrong. Haha.
This is a rare maple brown eye zebra foundonmygarage wood.
There may be a wood guy or two hanging about who happens to think stabilized and CA'd inlays would be pretty ba'dassed...
I don't have a Tbev mod, But I have a CAM-M and a couple PEKOs. You have been on my to buy list. The wooden insert will push me over the edge. Adds a touch of class to the performance. Some burl wood, or some walnut, with your design.. Tuff mode you aint got to worry about with the wood POP. A SS rda, a wood drip tip and a matching wooden insert.
I wood* have to splurge and get me one.
Not to mention a Timascus mod with a wood insert...
My knife nerd is showing...
I wood* have to splurge and get me one.
Not to mention a Timascus mod with a wood insert...
My knife nerd is showing...
Last edited:
I can pretty much do anything you can dream up, if you wanna pay for it haha! That's the problem with lots oI can pretty much do anything you can dream up, if you wanna pay for it haha! That's the problem with lots of my dreams, they simply get priced out of existence. You need a 1x2x4in block of timascus, for that one, it's doable, I'll certainly do it, if you want. Timascus inlays are doable on an aluminum mod, which is the way I think would be the most feasible, I can do the anodizing like that there awesome pic. An insert like the wood I can make you matching drip tips and button whatever, out of the same material as well.
Sent from my SM-G900V using Tapatalk
Sent from my SM-G900V using Tapatalk
Is that the highly sought after Broomstick Maple? Call that mod "The Sweeper". Man, it looks very "clean". It'll "brush" away the competition. No, no, no...hang around...I got a million of em...There's prolly not a lot of wood guys here, but I figured someone wood like something like this.
A squonker you can show off your wood with and not have to worry about it breaking when you drop it or look at it wrong. Haha.
This is a rare maple brown eye zebra foundonmygarage wood.
In all honesty, it looks pretty slick!
So many options. Lots of the best burls are only <30mm pen blanks. Full wood mods rule those out. But the inlay...
Sent from my GT-I9506 using Tapatalk
Sent from my GT-I9506 using Tapatalk
It's actually from a piece of oak molding that was in the corner of the garage, but the point, your right, it can be anything.
I almost tossed a deer antler on the lathe .
The inlay can be like 2mm thick.
I almost tossed a deer antler on the lathe .
The inlay can be like 2mm thick.
Ummmm...tell me that's not Rudolph.....Forecast is calling for fog on the 24th, and I...well......there's some stuff I need.It's actually from a piece of oak molding that was in the corner of the garage, but the point, your right, it can be anything.
I almost tossed a deer antler on the lathe .
The inlay can be like 2mm thick.
Actually that was Bambi. His neck is in a crock pot in my kitchen right now. Haha
Sent from my SM-G900V using Tapatalk
Sent from my SM-G900V using Tapatalk
If it's worth anything, my opinion is that dual 18490s aren't worth anything, it's all about the dual 18650.
I also don't have any use for a mod with electronics in it so take that opinion with a grain of salt.
I want dual 18650s because that's what's working for me with the CAM-M. I don't want anything electronic because I don't need any more electronics in my life. The mechs are working, that's what I'm going to stick with. If it's bolt-together or seamless I'll buy it. Seems you might have a backup right now, just deal with your shiz and I'll be here with my wallet when you're ready to produce the new ones.
I also don't have any use for a mod with electronics in it so take that opinion with a grain of salt.
I want dual 18650s because that's what's working for me with the CAM-M. I don't want anything electronic because I don't need any more electronics in my life. The mechs are working, that's what I'm going to stick with. If it's bolt-together or seamless I'll buy it. Seems you might have a backup right now, just deal with your shiz and I'll be here with my wallet when you're ready to produce the new ones.
I hear a dually calling your name!
Sent from my SM-G900V using Tapatalk
Sent from my SM-G900V using Tapatalk
Nothing wrong with a parallel 18490 Dually, the AW's are 1200mah & 20 amps, I use them in my T-mini's and get ~3-4 mls @ 0.72 ohms... waiting on a 18650 Dually & Micro, picked up a couple AW 18650 3000mah flat-top batteries to try out.
Do you know what the yellow and silver 3000mah cells are, I can't remember who makes them, but I'm wondering if they are aw's rewrapped.. I was thinking they were he's maybe, but I haven't looked into them much, I just think they are 3k as well
Sent from my SM-G900V using Tapatalk
Sent from my SM-G900V using Tapatalk
The yellow ones are MXJO
Some of Mooch's tests.
MXJO Yellow 35A 2800mAh 18650 Bench Test Results...only a 20A battery but equals the 25R
MXJO Yellow 35A 2500mAh 18650 Bench Test Results...only a 20A battery, but a decent one
MXJO Yellow/Silver 35A 3000mAh 18650 Bench Test Results...only a 15A-20A battery, but near an HG2
Some of Mooch's tests.
MXJO Yellow 35A 2800mAh 18650 Bench Test Results...only a 20A battery but equals the 25R
MXJO Yellow 35A 2500mAh 18650 Bench Test Results...only a 20A battery, but a decent one
MXJO Yellow/Silver 35A 3000mAh 18650 Bench Test Results...only a 15A-20A battery, but near an HG2
I use the HE 2's &HE 3's, a couple of 2.5y/o AW 1600's, and a couple Purple EFEST 2500's for the 650's, thought I'd give those 3000's a try... AW 1200's and Keepfire1100's for my 18500's.
- Status
Similar threads
