[CLOSED]
- Thread starter Tbev
- Start date
- th_trl_thread_readers 0
- Status
I haven't tried the Keepfire 26650's yet, but I did pick up 3 Keepfire 18500 1100mah 10a continuous and they work pretty well, so I'll be getting one of the 26650's shortly. For 18500's I prefer the AW 1200mah 20a continuous, allows a lower build for hotter vapes on a compact mod.
I'd also recommend the new AW 300mah 20a continuous, I find the AW's are a bit more expensive, but they hold up longer than my LG HE2 & HE4 or EFEST's, my AW 18650 1600mah's are two y/o and still hold a good charge.
I also buy my batteries from RTD & Kidney Puncher.
I'd also recommend the new AW 300mah 20a continuous, I find the AW's are a bit more expensive, but they hold up longer than my LG HE2 & HE4 or EFEST's, my AW 18650 1600mah's are two y/o and still hold a good charge.
I also buy my batteries from RTD & Kidney Puncher.
Illum is the only place I get batteries, vtc5's mostly..
Got a handful last week..
Thats a big hand full brother. I usualy order 8 to 10 at a time and feel thats a ton every rime. But u got quit a few of your own mods for batterie needs im sure my freind. Were is it u are referimg to to buy batteries i trust your judment. My very wonderfull girl freind was nice enough to buy me a thump from catfish so we will c what its all about here in the near future. Loving this vector u did up for me at the momment. I havent noticed it get realmhot yet but havent thrown anything crazy in it yet either. Plannimg on making a 24/30 clapton tommorrow c how it does with that
I use the xtar vp series and have been really happy with it. Efest has a 6 bay charger that I hear is pretty good as well. It's called the Luc series. May try that one eventually.
I rub the PURPLE 6 bat, it's got Bluetooth, it's actually pretty cool but it won't charge all 6 @ 2amps at the same time, it's still pretty good charger, I've had all the good ones and it's the one I'm using right now, it could be better but I still recommend it.
First off your girls dope, congrats! Didn't I give you a delrin tip for that vector?
Illumination supply, its illum.com might have an n on the end of it illumn I always forget that. They are the only place to trust for vtcs.
Sent from my SM-G900V using Tapatalk
Special batch, brass in the middle is seamless 26/15ml, bronze and copper on the sides are seamless 10mls.
Yes u did make me a delrin tip. I was just making a general statement of not noticing the atty it's self realy getting to hot ya know. I'm sure it would be on fire if u cranked it up 2 75+ watts on a reulated. Greatly appreciate the drip tip brother kinda a piss poor design with this atty u can't use any normal drip tips. Ya she is a good girl tries to buy me something once in awhile and I say no allways. I will check that site out. I am allways in the market for reputable sources for cells brother
Yeah I generally run 70w to 90w the dna200 mod I keep 90 to 110, lately, it's been making me happy.
Illum.com is where all the flashlight guys get their stuff, they have more money in flashlights than we do in mods.
Sent from my SM-G900V using Tapatalk
Illum.com is where all the flashlight guys get their stuff, they have more money in flashlights than we do in mods.
Sent from my SM-G900V using Tapatalk
I was thinking about what we were talking about and thought of this any light color would work but Say copper mod, with white cerakote on top then do the lizard engraving over it so the copper realy pops through with titanium top cap. Or do a brass mod with black cerakote coat then lizard engraveing with a copper top cap. Either way would just be sick my freind. What u think?
Man I need that copper mod! That thing is gorgeous!Special batch, brass in the middle is seamless 26/15ml, bronze and copper on the sides are seamless 10mls.
Sent from my iPhone using Tapatalk
What is that titanium mod mummas mod. I thought it was an sxj mod looking at it before but no chip so confused. I likemthe look kind of half heated like that
Damn, why I can't I double, triple like something? That is beautiful Tom, nice work!Here's momma's all done and ready to go home.
Thanks guys, that's the one and only anodized 10ml titanium in existence.
Sent from my SM-G900V using Tapatalk
Sent from my SM-G900V using Tapatalk
If you want a titanium micro get at me quickly. I am going to start on them in the next two weeks at the latest. The list is already over half filled. I'm thinking I might be able to do them for $500 starting point. Depending on a quote that should land, on materials, any day now.
Brushed, down to scotch brite styled softness, satin (very smooth brush, the step before polishing/buffing) polished, I'll show an example in a sec. Anodizing can be done in any level of finish. It can also five inside the squonk holes with a polished or brushed finish everywhere else. Standard is a titanium cap. Aluminum ( shown the contrast of the , brass bronze or copper caps are available. If you want multiple caps you can swap them out, have one on and one ready with a different atty / juice to swap out.
All mods will have a copper medallion pressed into the bottom that will be engraved and serialized, custom engraving is available.
I'm pulling out all the stops, these things are simply ridiculous. They feel life nothing else, they are smaller than any other 18650 Squonker, (same size as the micros in any other materials).
I'm trying to do my best to make sure everyone had an opportunity to get in on the batch. .. I don't do any advertising, so if you know anyone who may want I've obese let them know. Here's a link to this post, please share, and please email out on any questions. I make myself available as best I can.
Tmodcustoms Bottom Feeder Mods
Tmodcustoms Bottom Feeder Mods
If you want a titanium micro get at me quickly. I am going to start on them in the next two weeks at the latest. The list is already over half filled. I'm thinking I might be able to do them for $500 ......
Thank you guys all truly for your support, I hope you like them, they are a tremendous amount of tedious, technical work, I am happy to be able to finally offer them again, unfortunately I won't be doing any more after this run.
And of course, some more pics.
Obviously that isn't how the cap fits but I wanted to show the contest of titanium and copper, it's one of my favourites.
Brushed, down to scotch brite styled softness, satin (very smooth brush, the step before polishing/buffing) polished, I'll show an example in a sec. Anodizing can be done in any level of finish. It can also five inside the squonk holes with a polished or brushed finish everywhere else. Standard is a titanium cap. Aluminum ( shown the contrast of the , brass bronze or copper caps are available. If you want multiple caps you can swap them out, have one on and one ready with a different atty / juice to swap out.
All mods will have a copper medallion pressed into the bottom that will be engraved and serialized, custom engraving is available.
I'm pulling out all the stops, these things are simply ridiculous. They feel life nothing else, they are smaller than any other 18650 Squonker, (same size as the micros in any other materials).
I'm trying to do my best to make sure everyone had an opportunity to get in on the batch. .. I don't do any advertising, so if you know anyone who may want I've obese let them know. Here's a link to this post, please share, and please email out on any questions. I make myself available as best I can.
Tmodcustoms Bottom Feeder Mods
Tmodcustoms Bottom Feeder Mods
If you want a titanium micro get at me quickly. I am going to start on them in the next two weeks at the latest. The list is already over half filled. I'm thinking I might be able to do them for $500 ......
Thank you guys all truly for your support, I hope you like them, they are a tremendous amount of tedious, technical work, I am happy to be able to finally offer them again, unfortunately I won't be doing any more after this run.
And of course, some more pics.
Obviously that isn't how the cap fits but I wanted to show the contest of titanium and copper, it's one of my favourites.
- Status
Similar threads
