Was a tight fit all around not to short out any were and seriously almost don't fit through the post holes
[CLOSED]
- Thread starter Tbev
- Start date
- th_trl_thread_readers 0
- Status
Was a tight fit all around not to short out any were and seriously almost don't fit through the post holes
I like the short posts, but I think they could have a little more hole in them haha.
Sent from my SM-G900V using Tapatalk
Sent from my SM-G900V using Tapatalk
Scrap the parralel clapton no good for this rda. This is what I run in it allways. Best build I have found for it dual 24 gauge kantal parralell 3mm I'd .022 5 wrap flavor for days and chucks the vapor just fine on a mech
Attachments
Skillz - That is very similar to what I run in my Thump except I have switched to 316L SS, ramps up much quicker... The Tmod dually is a powerhouse for this build
been wanting to get the 316 ss wire,which gauge would be best?i like my builds at .35 to .40.sometimes mess with .50 but i like a lil heat and even .45 is stretchin it for me.especially with my pvc drip tips...lol.have an ultem cap commin for the pancake atty,has top air so im hopin the flavor is even better and the vapor too!ohman has did some good slow releases of accesorys for the pancake atty.top dollar return for sure.i couldnt help myself though!!dangit anyways!
The ultem top cap made all the difference for me on the pancake! Took a great atty and made it kick ...!
I mainly use 24g and 26g ss
It is for sure. This is my go to allday vape setup for atleast a month
yeah i was on the FB page and ran across it and was like WOW wait a minute and had asked bret for a few screws cuz i lost one and he gladly took a 55$ payment and its in preshipping as we speak...lol.
took a week vaca with the wife and didnt buy any vapestuff while gone...not even a vapeshop did i stop while i did over 1k in the cage...er car to the 4wheelers here.get home and have bought 3 attys and the ultem cap and a fv4 whatever it is called tank..wow just racking up the vapestuff...lol.
but the pancake i was really amazed at the flavor it chucks and the vapor too.has anyone here used 1 of the tanks i was talkin about(smokTVF4)hadda go lookit up.heard they can handle some serious wattage with the diff coils they have for them.i have 2 rebuildable decks with the one i got used.fer 20$ i figgerd what the heck.waiting on it now.
the narda from Roscoe has been a rightious purchase also,so much so i ordered another one from him.hope the M-atty is as kick .....i may have to get rid of a few of my derringers if this keeps up...lol.ok sorry for the longwinded post ill quit now.L8TR ya'll!
I haven't shared very much about these bad boys.
Here's the Kalamazoo: series, stacked 18650's 10ml with dna200 or sx350j boards.
Dropbox - Zoo test fire.mp4
Here's the Kalamazoo: series, stacked 18650's 10ml with dna200 or sx350j boards.
Dropbox - Zoo test fire.mp4
What are the dimensions on those things? I have a feeling they are smaller than they look.
ummm....theyrethe same size as a girl shaped 10ml mod but they are as tall as two 18650's stacked plus a half inch (the 510 threads are a half inch tall)
I haven't gotten much time to play with the dna200 lipo mod, but here's what I can tell ya for sure..
It will run on an 1800mah lipo OR dual 18650s. It's the same size front to back as the sx mod, it's a little wider, and a little shorter. I'm gonna make it curved, I think, on one side and flat on the other, with a door that comes off to get at the battery and bottle, and it's a 10ml bottle. Dunno how long till it will be ready, I've gotta get orders done first but that's what I'm kicking around.
Here is the new one next to the old one
It will run on an 1800mah lipo OR dual 18650s. It's the same size front to back as the sx mod, it's a little wider, and a little shorter. I'm gonna make it curved, I think, on one side and flat on the other, with a door that comes off to get at the battery and bottle, and it's a 10ml bottle. Dunno how long till it will be ready, I've gotta get orders done first but that's what I'm kicking around.
Here is the new one next to the old one
I really like the look of the new one, looks like it will for the hand better.
Sent from my LGL33L using Tapatalk
Sent from my LGL33L using Tapatalk
Thanks bud, it's wire a bit smaller than I thought I could get it. It's gonna be like the dually with a board stuck to the side, but I figured I make the dent for the real gradual rather than just slapping it on there. The ends will end up being as rounded as possible.
Sent from my SM-G900V using Tapatalk
Sent from my SM-G900V using Tapatalk
If it was not for these sick as all hell mods u make, i would still be dripping, yuck that would be. u cant c me and my 100,000 fans but we are doing the wave like at a base ball game. Screaming 200 200 200 
i dig the new look way better also,I thinks it will be way easier to hang onto then the delrin one.will be diff gettin used to a fire button on the front side of the mod and not on the top.I haven't gotten much time to play with the dna200 lipo mod, but here's what I can tell ya for sure..
It will run on an 1800mah lipo OR dual 18650s. It's the same size front to back as the sx mod, it's a little wider, and a little shorter. I'm gonna make it curved, I think, on one side and flat on the other, with a door that comes off to get at the battery and bottle, and it's a 10ml bottle. Dunno how long till it will be ready, I've gotta get orders done first but that's what I'm kicking around.
Here is the new one next to the old one
I was totally against the side fire button, until I used one. Now any time I can get away with it I do it. The side button you can hit with your thumb our you finger, it's great, and you can hold the mod backwards and squonk with your finger easily as well.
Sent from my SM-G900V using Tapatalk
Sent from my SM-G900V using Tapatalk
Received my first TMOD Customs today. Put a fresh bit of oil on the buckeye and the grain really popped.
- Status
Similar threads
