Totally agree I don't generally use anything just find regularly keeping all contacts clean with alcohol wipes work a treat!
Sent from my iPhone using Tapatalk
[CLOSED]
- Thread starter Tbev
- Start date
- th_trl_thread_readers 0
- Status
Totally agree I don't generally use anything just find regularly keeping all contacts clean with alcohol wipes work a treat!
Sent from my iPhone using Tapatalk
Squeeee!!! I see my tranny yellow one peeking out from the back! Yellow is my fave color BTW and it looks like others agree [emoji6]
Sent from my iPhone using Tapatalk with my paws
Mommabird62
I think that either tossed mine or put it back somewhere so that I wouldn't forget and accidentally use it.
Is the Deoxit gold ok for occasional use? I usually hit the batt tops and firing pins/ contacts once and awhile with it.
Sent from my iPhone using Tapatalk with my paws
Mommabird62
Last edited:
I keep on all my batteries and put a little on contacts as well. Deoxit gold that isI think that either tossed mine or put it back somewhere so that I wouldn't forget and accidentally use it.
Is the Deoxit gold ok for occasional use? I usually hit the batt tops and firing pins once and awhile with it.
Sent from my iPhone using Tapatalk with my paws
Mommabird62
Yeah I'm just giving you guys a hard time. ..
Here we go.
Here we go.
If you have some Deoxit gold and haven't put any on your contacts yet, you'll see a noticable difference when you put some on. I'm sold on the stuff.I keep on all my batteries and put a little on contacts as well. Deoxit gold that is
I've been working electronics MFG for 25+ years and swear by deoxit (G and D). We use it on all the gold edge contacts in our repaired PC's and I've seen it bring many MANY back from the dead. Plus they stay out there longer between services.
I believe I may have been one of the first to recommend it here when I bought my first 2 (other leading brand) bottom feeding mod's. It was slow to take until other folks started trying it out.
I dab both ends of my battery every change and I almost never have to clean. Of course I'm finding my Ti girl doesn't really oxidize anyway. Anyone else with Ti Tmods finding the same?
I believe I may have been one of the first to recommend it here when I bought my first 2 (other leading brand) bottom feeding mod's. It was slow to take until other folks started trying it out.
I dab both ends of my battery every change and I almost never have to clean. Of course I'm finding my Ti girl doesn't really oxidize anyway. Anyone else with Ti Tmods finding the same?
Last edited:
Same here xpup. I haven't seen alot of buildup or battery pitting. Of course, I neglected to keep the bottom inside of the battery chamber clean and it put poor ol' Brass Beauty in the hospital. Will be making a contraption with sandpaper on the end to get down in there to keep it cleaned out per Dr. Tom [emoji6]
Sent from my iPhone using Tapatalk with my paws
Mommabird62
BrassoSame here xpup. I haven't seen alot of buildup or battery pitting. Of course, I neglected to keep the bottom inside of the battery chamber clean and it put poor ol' Brass Beauty in the hospital. Will be making a contraption with sandpaper on the end to get down in there to keep it cleaned out per Dr. Tom [emoji6]
Sent from my iPhone using Tapatalk with my paws
Mommabird62
2 small strips torn off an old t shirt
Pencil with eraser
Variable speed drill
Put pencil in drill eraser out
Dip rag or blot with Brasso
Push wet rag into mod with eraser
Turn slowly with drill
Repeat with dry rag to clean up excess
I now do this with alcohol and no drill on my 7075 baby. Works a treat. You could probably do the same between polishes.
Tapatyped
Hey!, my bottom's big enough 
, I wanted a quick & easy fix so I could get this baby Vapin'.Tom, did you get my package???
Anything for momma.Thanks beckdg [emoji3]
Sent from my iPhone using Tapatalk with my paws
Mommabird62
I's a good boy.
Tapatyped
. Other than it hits like a train and built like a battleship anything else the people have to say before I pull the trigger
Yeah, after a review like that... What are you waiting for? You've convinced me a third is on the not too distant Horizon for me, looks like I need to sell a couple of others first.
Last edited:
lots ask me about squonking with the bar. put this on another site, thought i'd post it here too
inspired by all the maintenance talk, i gave my alum girl a bath, lightly sanded pos contact, deoxit... the full bit
took my .... off... i have no .... now
took my .... off... i have no .... now
I'm not a great fan of meticulously cleaning mods. My screws are lubricated by oversquonked e-juice and to clean the battery tube i use a bit of kitchen roll drowned in alcohol stuffed in there maybe once a week.
Battery-wise, i was using my batteries positive down to shorten the throw a little. This week i got some new ones, but bought the wrong ones and received flat-tops.
The good news is they work just fine and the 'correct' way up. They are Orbtronic SX30s and they are a bit longer than most.
Firing pin gets an alcohol rub once a week and some Deoxit if i can find it on my desk.
I ought to clean the outside of the Tmod which is now a bit grimy from dirt from my hands and crap at work, but life's too short for that. My car last got washed in Sept 2013.
T
Battery-wise, i was using my batteries positive down to shorten the throw a little. This week i got some new ones, but bought the wrong ones and received flat-tops.
The good news is they work just fine and the 'correct' way up. They are Orbtronic SX30s and they are a bit longer than most.
Firing pin gets an alcohol rub once a week and some Deoxit if i can find it on my desk.
I ought to clean the outside of the Tmod which is now a bit grimy from dirt from my hands and crap at work, but life's too short for that. My car last got washed in Sept 2013.
T
What do you do SuperTrunker? Lol
I know my new mod is going to be grimy after a short spot of work for a while. Loving it tho. Boooooom
I'm in the club now.
Worth everything plus some
I know my new mod is going to be grimy after a short spot of work for a while. Loving it tho. Boooooom
I'm in the club now.
Worth everything plus some
Yeah. Like tom says. Once you have one you "get it" and until then you don'tWhat do you do SuperTrunker? Lol
I know my new mod is going to be grimy after a short spot of work for a while. Loving it tho. Boooooom
I'm in the club now.
Worth everything plus some
Nice tmod
Sent from my GT-I9506 using Tapatalk
Without a doubt. Been waiting a bit to get one. Was up in the air about style,color. Yatta yatta. Then he posted the deal and it easily became a no brainer for me Been using it for about 5 hours non stop. Which is saying something Already plotting my next one The build quality is awesome. So simplistic. And yet. So well put together. Every RDA I have put on top has shined as well. Including my super low builds This is going to be my every day driver for a while
Just got in from a beach vacation. And Tom was so awesome to make sure it made it to my house the same day I got home.
Quality mod
Quality service
Quality quality
I will hit my local Vape shop tomorrow to sale a few of these for Tom. No worries
Just got in from a beach vacation. And Tom was so awesome to make sure it made it to my house the same day I got home.
Quality mod
Quality service
Quality quality
I will hit my local Vape shop tomorrow to sale a few of these for Tom. No worries
Very nice!! Like the aluminum button upgrade! See you opted for the brushed finishWhat do you do SuperTrunker? Lol
I know my new mod is going to be grimy after a short spot of work for a while. Loving it tho. Boooooom
I'm in the club now.
Worth everything plus some
- Status
Similar threads
