[CLOSED]

[blondie1964]

Temporary soft contact bar, till Tom sends me new ones.

 

[MFToms59]

I've been in a little bit of cold weather, I try to avoid it as much as possible. But I recommend applying softer pressure for a longer amount of time if it's cold with thick juuce, anytime it's tougher to squonk, longer squeeze with less pressure is easier and it gets the job done just the same. The 8.5 bottles I am constantly over squonking, but I love em. Because the bottles are tight surrounded all around except the opening a smaller squonk effects the bottle more: the bottle being trapped m, isn't allowed to move away from the pressure of your finger so the total amount t of force applied goes towards forcing juice up, as opposed to letting the bottle move over till its pinned against a wall like it is in mods without round, tight bottle containment. Does that make sense, that's why I always make the bottle holes on the tighter side.

Sent from my SM-G900V using Tapatalk

You said it better than I did, those tolerances are sooo tight, the bottle has to go in straight, it's also why sqounking with one finger on a full bottle works.

 

[Tbev]

I've been using the heck out of the soft contacts in the micro and I'm really liking them. I'll have them out on Monday, (blondie☺)

Sent from my SM-G900V using Tapatalk

 

[Tbev]

Trying to decide if I like it more with or without the back vertical . ..

 

[MFToms59]

I like the second one a bit more, but if the the scallops were shiny

 

[Tbev]

I've been playing with both of them and I do as well. I life the feeling of the fiber on my hands, it's really cool! It's REALLY LIGHT too, gets alot of aluminum cut off of it.

Sent from my SM-G900V using Tapatalk

 

[Chowderhead1972]

Tbev: Do you have 316 SS tubing that you could use in lieu of the carbon fiber? I have looked but came up with nothing.

 

[tw33k]

I'm running into a problem with my SX350J mod. I'm using dual coil T1 build and the resistance is 0.21Ω which I've locked in. For some reason tho, now when I fire the device, I get a dry coil error because it's reading the resistance as 0.4Ω, like it only sees one coil. I took off the atomiser and put it back on a few times but still reading the resistance wrong.

Any ideas?

 

[Tbev]

Check out the connections pos neg in the atty, where the coils mount.

Sent from my SM-G900V using Tapatalk

 

[Tbev]

Tbev: Do you have 316 SS tubing that you could use in lieu of the carbon fiber? I have looked but came up with nothing.

Yeah, I got a little bit of stainless haha. It's doable with anything really, ss is heavy tho.

Sent from my SM-G900V using Tapatalk

 

[Kaezziel]

Trying to decide if I like it more with or without the back vertical . ..

I'm picturing the shaved and scalloped cut-out with a bird's eye maple insert in a polished bronze mod... That would be sexy as hell!!

Damn I need to scrape some vape gear funds together!! Maybe I should put up a tip jar here at work...

 

[Tbev]

Dude, tip jars are essential! Haha! I haven't done any inlays on brass, bronze or copper mods, but I think your right it would look great!

Sent from my SM-G900V using Tapatalk

 

[Tbev]

Anyone use the Namirda from BCV?

 

[MFToms59]

Sweet looking Mod, great color & etching.

 

[Kaezziel]

Dude, tip jars are essential! Haha! I haven't done any inlays on brass, bronze or copper mods, but I think your right it would look great!

Sent from my SM-G900V using Tapatalk

LOL! I know, right? That, and I should charge double when I have to deal with mechanical engineers... the ones around here don't listen to anyone else because they already know everything.

Yeah, brass with bird's eye maple, bronze with olive wood, copper with cocobolo... I think any of those would be pretty sweet. Not sure how thin the walls of that carbon fiber are, though. If it's too thin, then most woods would probably be too fragile for daily use. Either that, or the battery would have to fit inside it pretty tight...

 

[Tbev]

Sweet looking Mod, great color & etching.

Thanks, the eyes have color inside of them, so does the mouth, came out perfectly , the eyes I did with an Engraving Bit, the rest I did with a real small ball end mill. It was one of the first engraving jobs I've done, I got it down now.

 

[Tbev]

The fiber I can replace with lots of stuff, titanium being the other direction I'd favor. I could anodize the Titanium to add lots of color.

Sent from my SM-G900V using Tapatalk

 

[MFToms59]

Thanks, the eyes have color inside of them, so does the mouth, came out perfectly , the eyes I did with an Engraving Bit, the rest I did with a real small ball end mill. It was one of the first engraving jobs I've done, I got it down now.

Sure, go ahead and rub it IN!

 

[Tbev]

Haha, when I do your engraving you'll see how detailed it is, it will look super clean!

Sent from my SM-G900V using Tapatalk

 

[Tbev]

Haha, I have this fantasy of free time, and what I'd like to build when I get some.... I'm thinking about a seamless dually or a titanium micro, those are the top two in my mind, really it depends on what you guys want .. I ask this a lot to lots of people and I never get very many ideas, what do you guys think?

Sent from my SM-G900V using Tapatalk