[CLOSED}

[OCPratt]

Have charged 4 different ones so far 2 at just under 15 min, one at 19 min and the other which was down to 3% when I took it out but it sat for a couple weeks took 29 min. If I remember correctly these times are in line with what Tom had said to expect when charging externally and not thru usb.

Sent from my SM-P607T using Tapatalk

Ah ok.

 

[Joe KY]

Just wanted to let ya all know, if your interested, Lawless Drip tips (www.lawlessdriptips.com) has 25% off through Sunday. Their not cheap, but 25% off makes it a whole lot more bearable. I've recently bought 2 from him for my Goons 22 & 24mm and just ordered 2 more, for the NarDA and another Goon. The tips don't get hot, the colors that he has available are off the hook, and their made one at a time.

 

[Joe KY]

Here's a couple of pictures, not the greatest, but may give you an idea of this guys work. Plus the tips come packed in shredded money....go figure.

 

[Drillerrt]

@Chowderhead1972 hey tom replied to an email I sent you this morning.

 

[Hank F. Spankman]

Anybody know where I can find a chuff cap/top cap for the 22mm Goon? I see one on 528's site but I bet it is for the 24mm.

I highly, HIGHLY recommend the Crispycaps Flav Chuff. As a bonus they also fit the Stumpy. All their caps & tips are dang good

 

[Nautilusfan]

Anybody know where I can find a chuff cap/top cap for the 22mm Goon? I see one on 528's site but I bet it is for the 24mm.

If you're talking about this one then yes...they'll work on either the 22 or 24

GOON Acrylic Drip Tips

 

[Chowderhead1972]

I highly, HIGHLY recommend the Crispycaps Flav Chuff. As a bonus they also fit the Stumpy. All their caps & tips are dang good

It must be pretty loose on the goon then; the stumpy chuff requires a 12mm bore, the goon is 13mm or so.

 

[Unior]

If you're talking about this one then yes...they'll work on either the 22 or 24

GOON Acrylic Drip Tips

This one
GOON Chuff

 

[Hank F. Spankman]

It must be pretty loose on the goon then; the stumpy chuff requires a 12mm bore, the goon is 13mm or so.

 

[Hank F. Spankman]

This one
GOON Chuff

That's for the original Goon

 

[penguiness]

Thank you for the Goon, Tom! Fits on the 2x18650 Nutter just right

 

[MFToms59]

Pretty mod peng

 

[penguiness]

Pretty Mod peng

Thank you!

 

[Chowderhead1972]

So I did a thing today.....

Re-engineered.... Rock solid, adjustable, peek insulator, VTBF manual adjust...
Not enough room for the auto adjust guts.

 

[Chowderhead1972]

How many of you still have Cam-Ms? I'm thinking of doing them on send in basis with VTBF 510s. Interested?

 

[Chowderhead1972]

Ahhh... So,it's a full cap?

 

[Train2]

Nice - and ignore my email, didn't realize that was a 510 swap, I thought you made an insulator for the one it came with. Is the VTBF held in by the same set screw, or is there drilling/tapping or other actual work involved?

So I did a thing today.....

Re-engineered.... Rock solid, adjustable, peek insulator, VTBF manual adjust...
Not enough room for the auto adjust guts.

 

[Hank F. Spankman]

Ahhh... So,it's a full cap?

Yessir

 

[MFToms59]

How many of you still have Cam-Ms? I'm thinking of doing them on send in basis with VTBF 510s. Interested?

Heck yeah, whenever you get a break on your other projects... any solutions on the wonky button? mine works over 95% ott, the other ~5% I have to fiddle with it

 

[pwheeler]

How many of you still have Cam-Ms? I'm thinking of doing them on send in basis with VTBF 510s. Interested?

Sounds interesting! I'd love any improvement.