[CLOSED}

[inspects]

Maybe I got my terms wrong. I have one stumpy with one and a half hole open the other with two open I'd like to find something with a tighter draw.

The Derringer is a good atty, you can close it way down.

 

[snakedoc]

Maker looks like the greatest atty of all time...anybody know if there's enough space for a Z-coil?

Could it be an 11?!!!!

 

[Papa_Lazarou]

Maybe I got my terms wrong. I have one stumpy with one and a half hole open the other with two open I'd like to find something with a tighter draw.

The Thump you have coming will have what you want. Tom also has Nipple clones coming that are quite decent on the flavour and tighter than a Stumpy as open as you have it.

 

[Unior]

Has there been a good mtl atty that I have missed here? I have two stumpies love the restricted draw on them but is there something with a little tighter draw. I also have a thump ordered just because.

That's exactly why I ordered a Chinese Nipple. it looks like it could be pretty tight. I need something I can use in my office at work & still see The Chalice 3 I have just isn't cutting it.

 

[inspects]

Watch the classifieds for a nuppin

 

[Drillerrt]

Thanks for the advice everybody. I'll wait for the thump and I'll be on the look out for nuppin.

 

[MFToms59]

The Maker, Manta, Nectar Micro (truely mtl) just to name a few

Didn't get a Maker, I like the Manta very much and love the Stumpy with a Single-side coil two holes on the coil side. I'll second the Nectar Micro, kayfun type deck and a pretty tight draw even when wide open, about equal to one hole on a Manta... or pretty close.

 

[TheKiwi]

A thump sounds like it would fit too. Wide open it is a slightly restricted Direct lung. Can be closed down to MTL easily.

I also confess to be a Thump fan boy


Sent from my iPhone using Tapatalk

 

[Tamer El-Meehy]

Thanks for the advice everybody. I'll wait for the thump and I'll be on the look out for nuppin.

I think there is a nuppin in the classies. And I know first hand that the seller takes excellent care of his gear. See if it's still there.

 

[Chowderhead1972]

The no logo versions have a Hellfire finish. I did one with an element finish but it seemed too polished.

 

[ernieball]

The no logo versions have a Hellfire finish. I did one with an element finish but it seemed too polished.
View attachment 545479

Do you still have a good amount of these in stock, Tom? I didn't even take the time to see that the air travels through the barrel, hitting the coils directly on the side. Sounds like a really good flavor Atty that I could start out with that's 2mm.

 

[ernieball]

The no logo versions have a Hellfire finish. I did one with an element finish but it seemed too polished.
View attachment 545479

The no logo versions you have look beautiful, by the way

 

[Chowderhead1972]

Do you still have a good amount of these in stock, Tom? I didn't even take the time to see that the air travels through the barrel, hitting the coils directly on the side. Sounds like a really good flavor Atty that I could start out with that's 2mm.

The no logo versions you have look beautiful, by the way

I sold out of the initial 30 but have 15 more SS that should be here Saturday so I should have plenty. Fill out the doc. I will be shipping all of them on Monday.

THE MAKER RSA by CATFISH

 

[Clark F]

Anything coming up for next week? Micro run or ?

 

[Chowderhead1972]

Anything coming up for next week? Micro run or ?

I could never get in touch with Adler for that Mikro I supposedly have 20 Stillare4s on the way.

 

[snakedoc]

I sold out of the initial 30 but have 15 more SS that should be here Saturday so I should have plenty. Fill out the doc. I will be shipping all of them on Monday.

THE MAKER RSA by CATFISH

Tom.. Have you had a chance to test it out? opinions especially compare to the the Manta2

 

[Chowderhead1972]

Tom.. Have you had a chance to test it out? opinions especially compare to the the Manta2

You don't want my opinion... I hated the Manta and the Derringer as well. That said; I like this one as I said previously if I was going to release my own atty it would be very similar to the Maker. This is one of those attys that make me think "why didn't I think of that?" I had a similar conversation with myself over the Narda, simple elegant and not gimmicky. Daddy likes. Currently I'm looking down the barrel of a 100 atty weekend and I'm doing my best to keep up but I just haven't had the time to stop and coil up a maker. I did however take a few draws off the maker in various afc positions and I will say I do like the range; it goes from Nectar tight to 2x2 stumpy holes if that makes sense to you. I did not try out the included chuff top however. I would probably stick with the 510 top and included drip tip but that's just me. I vape weird I suppose. I like hot and very wet with my coils running well beyond max power according to steam engine.

Random thought: If you are thinking the Maker is like the Vector you are way off... I hated the Vector also. Think Rogue with a functional afc, side air to the coil, with a dual post deck with room between the posts. That was one of my dislikes about the manta; the coils were too close together. If I could have Z coiled the Manta it might have been a contender.

 

[Clark F]

I could never get in touch with Adler for that Mikro I supposedly have 20 Stillare4s on the way.

Well then, I guess add another Maker to my order. I just paid Chad for one a few hours ago. Do you want me to fill out the google form again for one more?

 

[Chowderhead1972]

Well then, I guess add another Maker to my order. I just paid Chad for one a few hours ago. Do you want me to fill out the google form again for one more?

Please do. I use the doc to track inventory. Do leave a note to ship with the other one you already paid for. Let's not give usps any more money than we have to.

 

[Clark F]

Thanks Tom!