Send me an email. Plates are $45 per set and either $7 for shipping or $4 for shipping (priority or first class).
[CLOSED}
- Thread starter Chowderhead1972
- Start date
- th_trl_thread_readers 0
- Status
I know I'm missing door orders... I have labels for:
Distortoblotto black
Kentastic black
Kelt black
Duane M black
If you have ordered them already let me know... If you haven't ordered them yet and want them let me know as well. These will be shipping later today.
Distortoblotto black
Kentastic black
Kelt black
Duane M black
If you have ordered them already let me know... If you haven't ordered them yet and want them let me know as well. These will be shipping later today.
I'm working on the G10 plates tonight. Planning to ship all of them Monday. If you guys could do me a favor and if I owe you plates only send me an email with your shipping info and plate specifics. If you have changed your mind and want another color that's fine also but put it in the email.
To the folks with mods:
1. Mrwilliams
2. V4vandetta (PAID for 2 sets of black G10 + priority shipping)
3. nautilus
4. MFToms
5. BottomFeeder
I have you 5 covered, your labels are already made up and your mods are in production currently (as in not shipping Monday) I make the Labels up as the payments come in, I slacked a little on the plate payments. I can work on the plates at work as Saturday nights are always slow.
To the folks with mods:
1. Mrwilliams
2. V4vandetta (PAID for 2 sets of black G10 + priority shipping)
3. nautilus
4. MFToms
5. BottomFeeder
I have you 5 covered, your labels are already made up and your mods are in production currently (as in not shipping Monday) I make the Labels up as the payments come in, I slacked a little on the plate payments. I can work on the plates at work as Saturday nights are always slow.
I know I'm missing door orders... I have labels for:
Distortoblotto black
Kentastic black
Kelt black
Duane M black
V4Vendetta Black 2x
If you have ordered them already let me know... If you haven't ordered them yet and want them let me know as well. These will be shipping later today.
Distortoblotto black
Kentastic black
Kelt black
Duane M black
V4Vendetta Black 2x
If you have ordered them already let me know... If you haven't ordered them yet and want them let me know as well. These will be shipping later today.
Quick update from Midwest Vapor Expo. There were two Jr's and an LBC (that I knew of) floating around the room yesterday. The attention garnered by the Jr I was escorting was very favorable. Much was made of the 20700 format, but the fit and finish garnered the most commentary. Magnetized plates were a win, and upon learning of threaded inserts and continuous carbon filament infused nylon, many were incredulous that this was a printed mod. The one 3D printing booth proprietor almost got out his magnifying glass for an intense examination. He had a hard time believing that the Jr was printed... I think he thought that it was injection molded. Overall the reception was very good, and I was proud to be the bearer of such a fine mod. You got a winner here, Tom!
Sent from my Nexus 5X using Tapatalk
Sent from my Nexus 5X using Tapatalk
Plates and send ins...
6-5-2017
45356 9505511002837156078377
66618 9505511002837156078384
94591 9505511002837156078391
94110 9505511002837156078407
95826 9505511002837156078414
55363 9505511002837156078421
30518 9500111002837156078435
45368 9505511002837156078445
6-5-2017
45356 9505511002837156078377
66618 9505511002837156078384
94591 9505511002837156078391
94110 9505511002837156078407
95826 9505511002837156078414
55363 9505511002837156078421
30518 9500111002837156078435
45368 9505511002837156078445
I'm jealous... I would have loved to meet both of you.
Injection molded... If I were a wiser man.... injection molded polycarbonate would be nearly un breakable and ready to build out of the box. It takes hours to re-machine all the flanges and grind these things smooth.
Yes it was great to meet another cam member, also had several people that could not believe it was 3d printed.
Sent from my SM-P607T using Tapatalk
Btw. I finally finished my LBC jr 75c. Honestly I'm not as impressed as I though I would be. The screen is 4x thicker than the DNA75which leaves almost zero room between the screen and the board and the screen feels super fragile all for 3volts and old sx350 shaped screen.
I have decided I'm going to do a micro mech 20700 with the same material as the LBC jr with top shelf guts.
I have decided I'm going to do a micro mech 20700 with the same material as the LBC jr with top shelf guts.
Yeah we are going to need to have a catfish reunion where we could all meet up. Handed out all the stickers you sent, I don't thank I saw one descent squonk mod . I just recently picked up a zion made by Armageddon , it's a nice single coil bf atty with a deep well only issue I've had is the hole in the pin is too small so I happen to meet him at the meet and get to talking with him about bf'd atties and he was just a complete and utter ......, telling me how he's been doing his own pins for himself and if the squonk hole was bigger it would fill the chamber and flood it where as I continued to explain how it would drain back to the bottle. I then ask what mod he uses and he says I'm bout to get a bolt, which he doesn't even know who makes them. Rant over just chaps my ... when some wannabe tries to cash in on the back of someone like you who truly revolutionized the process and all I was doing was trying to give him some creative criticism.
Sent from my SM-P607T using Tapatalk
Stickers! <facepalm> Tom, if my package is not sealed up yet, would you throw a couple/few stickers in please?
Mike, you're right, apart from you, I did not see a single squonk worthy of the name the whole time I was there.
All the modders I talked to were seriously impressed with the Jr though.
Mike, you're right, apart from you, I did not see a single squonk worthy of the name the whole time I was there.
All the modders I talked to were seriously impressed with the Jr though.
One thing I did come across yesterday that made me happy was the silicon 20700 battery sleeve.
I found it at the BJ box mods/ Broadside booth, and convinced them to sell me one. Can't find them on their website, but at least we know they exist.
I found it at the BJ box mods/ Broadside booth, and convinced them to sell me one. Can't find them on their website, but at least we know they exist.
Sorry... you are about 2 hours late. Next time.
One thing I did come across yesterday that made me happy was the silicon 20700 battery sleeve.
I found it at the BJ box mods/ Broadside booth, and convinced them to sell me one. Can't find them on their website, but at least we know they exist.
Nice wish I would have seen those I'm using a small zipper case held a hana one I got for the wife. It will hold 3 20700 so It works for now. Here's a pic of the 2 day haul, also won the raffle a got the omni rda by vaper gate (not released yet to public)
Sent from my SM-P607T using Tapatalk
Wow! you were busy.Nice wish I would have seen those I'm using a small zipper case held a hana one I got for the wife. It will hold 3 20700 so It works for now. Here's a pic of the 2 day haul, also won the raffle a got the omni rda by vaper gate (not released yet to public)
Sent from my SM-P607T using Tapatalk
One thing I did come across yesterday that made me happy was the silicon 20700 battery sleeve.
I found it at the BJ box mods/ Broadside booth, and convinced them to sell me one. Can't find them on their website, but at least we know they exist.
Wish I could find some of these (or any other 20700 case for that matter).
Last edited:
These actually work. They stretch out enough to fit.
Just do an ebay search for 18650 Silicone Battery Case.
Just do an ebay search for 18650 Silicone Battery Case.
- Status
Similar threads
