[CLOSED}

[Rex Everything]

Just received a stillare V4 via Chad...as always you work is rockin' but this thing is waaaayyy nicer than I hoped...running a couple of hastily made 3mm 26X36 316 claptons at 68 watts...good times...now to find a threaded delrin or similar chuffish cap to replace the SS one.....although the SS stays surprisingly cool

 

[Unior]

Here is the Goon 22 single side. Am I missing a hole? Sounds like the 24 has 3.

 

[TheDigital99]

View attachment 594417 Here is the Goon 22 single side. Am I missing a hole? Sounds like the 24 has 3.

Mine are the same...

The Goon 22 has 3 holes per side for dual and two on the single coil side

The Goon 24 has 3 holes on both the single and dual sides

 

[Chowderhead1972]

Quick Battery Question: I drive all day. Once the batteries are conditioned, so after 5-6 full charge and drains, is is ok to keep partially charging the LBC in the car with a car charger? Would constant 20-30 min. on the charger negatively effect the battery?

I hope not... I do the same thing.

 

[jazzvaper]

Quick Battery Question: I drive all day. Once the batteries are conditioned, so after 5-6 full charge and drains, is is ok to keep partially charging the LBC in the car with a car charger? Would constant 20-30 min. on the charger negatively effect the battery?

For an entirely different reason I needed to review this question. (I sometimes charge my LiPo's externally on either a SkyAC or Turnigy charger.)

Scroll down to Table 2 for an idea of battery life relative to DoD (Depth of Discharge)

 

[Chowderhead1972]

Mine are the same...

The Goon 22 has 3 holes per side for dual and two on the single coil side

The Goon 24 has 3 holes on both the single and dual sides

I'm almost positive if there were three holes on the single coil side and you closed it down to 1 hole or a half of a hole it would open a sliver of one of the dual coil holes. 528 is smart like that. 528 has always tried to find a way to get maximum airflow out of everything; way back to their hot rodded Kayfun 1.3 days. If it was possible to do 3 holes on 3 sides they would have done it.

 

[Chowderhead1972]

For an entirely different reason I needed to review this question. (I sometimes charge my LiPo's externally on either a SkyAC or Turnigy charger.)

Scroll down to Table 2 for an idea of battery life relative to DoD (Depth of Discharge)

I would suggest everyone read Jazzy's link, especially those with LBC"s. Nice find Jazz.

 

[rudedog]

I would suggest doing a little research prior to pontificating with incorrect information in regards to who copied whom... Hold both mods in your hands as I have numerous times and you will see and feel the difference. If Corey was so inclined he could make the same argument over the magnetic top and the use of the Italian bottles. I'm trying to avoid taking sides here as have bought and suggested both of them numerous times but while each have their similarities they do have their differences and are aimed at different audiences; the CC is more aimed at the more mature vaper that is looking for a really clean and small pristine mod where the TMod is more of a younger mans (or ladies) mod more aimed at maximum output and burlyness. As I said I have had both and I still have 2 TMods but neither have LBCs so there is that..... Maybe the brotherhood I feel with both of them is one sided.

i know you spent a bunch with tbev and im shocked he hasnt did the same for you man...bummer.ive owned a buncha t-mods and my primary btich is the cerecote job SUCKS.other then that the mods do hit fairly decent.the dually hits like a train.the "my mod" is one that hits super frickin hard and im glad i stuck with it.i loved the LBC but just couldnt get past the fact i could drop it and ding the hell out of it...too much $ to drop one of them,thanks asbestos....for buying it off me.i think thats who bought it...lol.

 

[sqonker]

List separated.

Let's keep the Chi-Narda list going $45 (unlimited)
1. Chowderhead1972
2. Plumeguy - check sent
3. Plumeguy - check sent
4. Nautilusfan - check sent
5. motabrownie - Paid via WF Sure Pay
6. jazzvaper
7. V43L1N
8. drucco99
9. Squonkoholic
10. Squonkoholic
11. bigTRAV710-m/o sent
12. Ron R
13. ong999
14. MFToms59- fell off somehow

MAtty/Hype clones $45 (10)
1. sarndt0
2. sarndt0
3. ClarkF plus sent in maker hat.
4. AU717
5. latexyankee

Standard shipping rates apply, no PayPal, no Google wallet, Checks and Money orders preferred

15.sqonker

Sent from my SM-N920V using Tapatalk

 

[distortoblotto]

Let's do another goon run... Anything that's in stock at 528 is eligible. 22mm, 24 mm SS, black, copper, brass.... What ever.... Pricing will be within $10 of retail pricing for bottom fed and reversible to top fed. (Meaning the BF pin will come installed and the original copper pin will be in the velvet pouch).

Black 24mm goon
1.thomasl
2.penguiness
3. Copterstyle
4. distortoblotto


SS 24mm Goon
1.
2.

Brass 24 Goon
1.
2.

Copper 24 Goon
1.
2.

Black 22mm Goon
1.
2.

SS 22mm Goon
1. Squonkoholic (From old list)
2. havok333
3.

Brass 22mm Goon
1. ghola1was
2.

As always electronic payments are out (other than SS surepay or western union)
Domestic shipping is $7 for the total order or free with the purchase of an LBC.
CANADA $25
Rest of the world $33

 

[distortoblotto]

Sqounk'in and roll'in with the LBC. Road flicks...

Hello Mt. Shasta.

 

[ghosteye]

Thanks for the pics, distortblotto. I am going crazy waiting for my LBC to be shipped and your pics are soothing my mind. I've read through this entire thread from page 1 twice now. Now to watch the escribe stuff and play with that.

 

[Chowderhead1972]

I will have more info on the powder LBCs on Thursday. Stay tuned. I don't know about you guys but I'm stoked for the neon green chrome.

 

[Nautilusfan]

Will that include info on the pearl white variation? Wasn't there some talk of a pearl white/blue flake??

 

[Chowderhead1972]

Will that include info on the pearl white variation? Wasn't there some talk of a pearl white/blue flake??

Yes. I need to work with the powder distributor for color samples on that one. I will call them tomorrow.

I'm thinking the pearl storm trooper look will be hot as well.

Envision that with a black goon and white Delrin or Teflon tip.....

 

[Chowderhead1972]

Thanks for the pics, distortblotto. I am going crazy waiting for my LBC to be shipped and your pics are soothing my mind. I've read through this entire thread from page 1 twice now. Now to watch the escribe stuff and play with that.

I'm shaping all of the external carbon fiber plates as I type. Won't be long now.

 

[Nautilusfan]

Yes. I need to work with the powder distributor for color samples on that one. I will call them tomorrow.

I'm thinking the pearl storm trooper look will be hot as well.

Envision that with a black goon and white Delrin or Teflon tip.....

Uh huh...white diamond pearl....you know...to give it a little shimmer

 

[Chowderhead1972]

Let's bring this forward

The Powder lists:
Who would be up for an LBC in glowing yellow over super chrome (like on the swing arm on the pictured motorcycle?

1. Chowderhead1972
2. inspects
3. Houndb
4. cheeseofvapes


If you want regular bright yellow just wait, I want one of them also. That will probably be the third round. The second will probably be lambo pearl orange.
Will edit for example.

Eta:


Do you see a recurring theme here? I like bright.... Earth tones can suck it.....

1. NatGasMan
2. distortoblotto
3. havok333
4.

How about regular bright yellow like this:


1. NatGasMan
2.
3.
4.
5.

And the final option:
Pearl White: working on a color sample planning on a pearl white with a blue shimmering Pearl.
1. inspects
2. bottomfeeder( pending color visual)
3. Asbestos
4. freedogg (original 510..if possible?)

 

[Nautilusfan]

Correct me if I'm wrong Tom but isn't the powdercoat super durable?

 

[ghosteye]

I'm shaping all of the external carbon fiber plates as I type. Won't be long now.

Thanks for the update