[CLOSED}
- Thread starter Chowderhead1972
- Start date
- th_trl_thread_readers 0
- Status
I will definitely look into that one. I had been eyeballing The Typhon but dealing with Italy can be a pain. The issue I have had lately as beautiful as many of the Italian mods are many of them aren't made very well internally. I sent in a few e8s and e9s to be upgraded to 60 watt boards (2 dna60s and 2 dicodes 60s) and I ask my mod modded guy to take a pic of the board cavity. The pics I got back have no board mount milled into the actual chassis. Who does this? This is why most Italian mods struggle past 30 watts before the false "Low Battery" prompts come on way too soon. I will say I have had zero issues with my Sva Blue Kimera so far.
For reference this is what $500 buys you from SB
View attachment 611995
This is an LBC (same board mount area)
Notice the board mount (3 present, only one visible in this pic). The board grounds solidly to the chassis. Doing it my way the board becomes one with the body.. that's also why the LBC isn't plagued with false battery warnings.
Sorry just venting. Very frustrating... my mods might be
l you
we discussed it awhile back while u were gone
very good atty I have one. The BF pin actually has a good sized hole. I'll send a pic when I get home. But when I first saw this I think I wrote the exact same thing u did...lol!
we discussed it awhile back while u were gone
Beez actually sent me one to look over and to be completely honest it's a great atty; period. Other than the layout forcing the air holes to be lower than I like for a bottom feeder it very close to perfect and beyond that Mac(Psyclone Modder) I'm told is a great guy to deal with AND he tries to keep up with demand and keeps his prices from getting out of hand.
I would buy a few but my love affair with the ChinardO is still going very strong. I haven't gone 10 minutes in the last 2 months without vaping a ChinardO while awake. Some might see that as a problem, I do not....
It's going to take something pretty special to dethrone the ChinardO. The Hadalay is pretty special but not special enough to throw my beloved $45 chinardos to the wind.
Last edited:
So, I got this bad girl finished last night but Photobucket took a crap on me so... (sorry for the pic quality...)
Now I finally have a backup for my red LBC
But a Catfish, I am not... the board cover panel sits just proud by a quarter millimeter...
Ohh well, "This is my mod. There are many like it but this one is mine.", etc.
Thanks Tom!
Now I finally have a backup for my red LBC
But a Catfish, I am not... the board cover panel sits just proud by a quarter millimeter...
Ohh well, "This is my mod. There are many like it but this one is mine.", etc.
Thanks Tom!
No prob. I was a few days behind and saw beez mention magnets for his (her?) MyMod.
Unfortunately a LBC is not in my future.
Just no interest in chips and boards.
The Ch-O-Attys are ready. Who's in. I do them bottom fed for 45 or bottom fed with HD terminals (m2.5) for 55. (Plus $7 for shipping).
1. distortoblotto (HD)> (Funds sent)
2. distortoblotto (HD)> (Funds sent)
3. havok333 (HD) (check sent!)
4. havok333 (HD) (check sent!)
5. Tagi (HD) (MO Mailed)
6. Tagi (HD) (MO Mailed)
7. ghola1was (HD) (SurePay)
8. Boobsley (HD) check mailed last week.
9. Beez0527 (HD)
10. Kingdal (HD)
11. Train2 (HD) check mailed (with mm, too)
12. Hotsauc333 (HD)
13. Drillerrt (HD) check sent
14. Drillerrt (HD) check sent
15. thekiwi (HD) bank transferred
16. Joe Ky (HD) check's in the mail
17. Kentastic (HD)
18. Gigdujour (HD) MO and email sent
19. LittleBird (HD) check sent; email sent
20. LittleBird (HD) check sent
21. MelodiousThunk (HD)
Just to mention I still have Chi-NardAs still in stock if you would like to add any to your orders
1. distortoblotto (HD)> (Funds sent)
2. distortoblotto (HD)> (Funds sent)
3. havok333 (HD) (check sent!)
4. havok333 (HD) (check sent!)
5. Tagi (HD) (MO Mailed)
6. Tagi (HD) (MO Mailed)
7. ghola1was (HD) (SurePay)
8. Boobsley (HD) check mailed last week.
9. Beez0527 (HD)
10. Kingdal (HD)
11. Train2 (HD) check mailed (with mm, too)
12. Hotsauc333 (HD)
13. Drillerrt (HD) check sent
14. Drillerrt (HD) check sent
15. thekiwi (HD) bank transferred
16. Joe Ky (HD) check's in the mail
17. Kentastic (HD)
18. Gigdujour (HD) MO and email sent
19. LittleBird (HD) check sent; email sent
20. LittleBird (HD) check sent
21. MelodiousThunk (HD)
Just to mention I still have Chi-NardAs still in stock if you would like to add any to your orders
Last edited:
Does this look familiar Tom?
Once the Ch-O-Attys hit, the plan is to have a little (same build and power) Narda, Ch-O-Atty, Hadaly face off just to see whats what once and for all. Sure seems as if a lot of the newer two post 22mm atty's are following a variation of the Narda design.
( most recently see the Most Wanted from Hellvape )
Last edited:
Same.
Narda, I always want a little more air. Hadaly, I am occasionally squonking up the air channels (it clears when I fire, but still, I get a little gurgle). Here's hoping the Ch-O is the nutz.
Narda, I always want a little more air. Hadaly, I am occasionally squonking up the air channels (it clears when I fire, but still, I get a little gurgle). Here's hoping the Ch-O is the nutz.
No... the Ch-O-Atty clone took its place. I might get a bunch of them pvd coated black if they become wildly successful however. The Cho-Atty is nearly identical to the ChinardO in vape and easier to build on.
My second sunbox.... I remember it well.Does this look familiar Tom?
View attachment 612029
Once the Ch-O-Attys hit, the plan is to have a little (same build and power) Narda, Ch-O-Atty, Hadaly face off just to see whats what once and for all. Sure seems as if a lot of the newer two post 22mm atty's are following a variation of the Narda design.
I haven't actually vaped the Hadalay but I have used the others. The OAtty seems to me as the most efficient of the group but has the most open draw. I assume it has something to do with the air hitting the bottom of the coil. I bet the Hadalay has the same issue but with a slightly tighter draw.Does this look familiar Tom?
View attachment 612029
Once the Ch-O-Attys hit, the plan is to have a little (same build and power) Narda, Ch-O-Atty, Hadaly face off just to see whats what once and for all. Sure seems as if a lot of the newer two post 22mm atty's are following a variation of the Narda design.
This comparison makes me very happy as it highlights how far we have come. Any of these attys by themselves would be revolutionary. We have 3 to chose from it's a great time to be a bottom feeder.
Your second, my first. Who's on third? Hell, I dunno...
Still vapes every bit as good as the day I received it.
Last edited:
Have played with the Narda quite extensively and have tossed twisted, verted , Claptoned and even a dual 1.5mm shotgun coil setup ( duals as close as possible side by side) at it trying to get the best out of it. Coil and wicking being everything I found that for me, a simple 2mm 26g 4/3 wrap to 0.4 mounted and angled dead center to the intakes ( wide open) and the wicking routed away from them gives me the best flavor and draw. Anything more and the coil and wick start to restrict the airflow. The only tricky part is getting the wick fluffed to the coil (to prevent the spits) while keeping it clear of the intakes.
I also have a Chinarda set up and running in TC (33w 430d) with an angled ni200 2.5 mm 14/13 to 0.12. Its a snug fit, but the coil is wide enough that the wicking stays clear of the intakes.
The Hadaly on the other hand is a slightly different animal. Here I'm running it in TC @ 35w and 450 degrees with my go to slightly spaced ni200 3mm ( plenty'o room between the posts and could go 4mm ) 26 12/11 to 0.11 mounted " legs up" which drops the coil in at just about right depth and allows it to be set dead even between the intakes. The wick is fluffed to the coil and fanned out to meet the posts on both sides. Have a second one to build for straight power when I do the comparison builds including the ChO's.
Both are damn fine attys that vape dead smooth with good draw, flavor and production, but until I get all three up and running in both power and TC mode for the comparison I would have to agree that even though they are basically the same concept, your assessment is pretty dead on.
Right now, build advantage = Hadaly
Flavor and draw advantage, I have to go with the Narda.
I also have a Chinarda set up and running in TC (33w 430d) with an angled ni200 2.5 mm 14/13 to 0.12. Its a snug fit, but the coil is wide enough that the wicking stays clear of the intakes.
The Hadaly on the other hand is a slightly different animal. Here I'm running it in TC @ 35w and 450 degrees with my go to slightly spaced ni200 3mm ( plenty'o room between the posts and could go 4mm ) 26 12/11 to 0.11 mounted " legs up" which drops the coil in at just about right depth and allows it to be set dead even between the intakes. The wick is fluffed to the coil and fanned out to meet the posts on both sides. Have a second one to build for straight power when I do the comparison builds including the ChO's.
Both are damn fine attys that vape dead smooth with good draw, flavor and production, but until I get all three up and running in both power and TC mode for the comparison I would have to agree that even though they are basically the same concept, your assessment is pretty dead on.
Right now, build advantage = Hadaly
Flavor and draw advantage, I have to go with the Narda.
Last edited:
That's the part I'm looking forward to most. Also hoping to get a bit more coil into the Ch-O-Atty than what fits into a Narda.
I hope YOU and Harry come up with a Stumpy II
i was able to get MM to fire safely,couldnt afford to send it out to change the 510.but the original 510 was WAY loose but by putting a bushing of sorts on the 510 it hasnt hard shorted since then..it is a hard hitting lil mod.the fella that had it made was on the right track.my door is sloppy to.but it will vape...lol
- Status
Similar threads
