[CLOSED}
- Thread starter Chowderhead1972
- Start date
- th_trl_thread_readers 0
- Status
For those that got the O atty, how are you building it?
I got 5.5 wraps 2.5mm kanthal 24g (I think) coming in at.66 ohms. Bottom of the wire is just above the air holes.
It's a good vape, but somewhat cool. Same build on the Narda heats up the atty so fast I can't take but a couple hits at a time.
I didn't like 24 in the Narda, but 26 is just right for me.
For those that got the O atty, how are you building it?
I got 5.5 wraps 2.5mm kanthal 24g (I think) coming in at.66 ohms. Bottom of the wire is just above the air holes.
It's a good vape, but somewhat cool. Same build on the Narda heats up the atty so fast I can't take but a couple hits at a time.
Try flipping your coil over so it is down lower. I've found the lower the better since the airflow is also angled down. YMMV but that works best for me.
From what i read its a diff manufacturing process and it comes out like powder salt cystal that u just mix with pg or vg. I wonder if it has better shelf life than vg or pg nic. Ive had 3 people recommend it.
Got some One Eyed Turtle by Micro Brew Vapor , its a salty pretzel and it is spot on flavor profile. Its amazing , salty and a little bit sweet baked pretzel. Also fried oreo by Fryd is amazing , a 30ml gone in a day. Im spending way to much on juice (120ml+ per week)so im gonna try making my own and hopefully it will be good and save a bunch of $ for more squonkers!!!
I just started really making mine over the last few months for the same reason. I ordered my nic premixed from nude nic. 6mg 70/30 vg/pg unflavored base & then my flavors from bull city vapors. I like those flavors you posted about. If you come across any good recipes let me know.
I got 50ml 100mg pg nic and 500ml of vg and pg from nud nic to try out, and 3 recipe kits from ecigg express that come with 5 30ml flavorart flavors and few other brands ' she be enough for 500ml of juice +
This is an unusual post for me....
To any of my MyMod folks could anyone spare a contact leaf? I'm in the process of modding 5 of them as well as making 2 drop in 510s for them and I have broken one of the 5 contact leaves. In reading Beez's instruction manual these should have each come with a spare contact (per the original manual) I just need one. I will negotiate for one.
To any of my MyMod folks could anyone spare a contact leaf? I'm in the process of modding 5 of them as well as making 2 drop in 510s for them and I have broken one of the 5 contact leaves. In reading Beez's instruction manual these should have each come with a spare contact (per the original manual) I just need one. I will negotiate for one.
There were two shipped with it. One is raw (as in Train's picture) and one plated.
I'd give you my plated one, but It'd take 2-3 weeks to get there.
No worries. I have your 510 assemblies ready to go. As a matter of fact I have all the tops of the MyMods ready to go. I'm currently re-engineering the bottom negative connection.
I wonder if the raw version is any stronger.....
I also have a threading head on the way to do the rest of the Ch-O-HDs this should save a lot of time and aggravation. You guys have no idea how much of a pain it is drilling and tapping 100+ m2.5 holes in Chinese stainless. The first 25 took 18 hours. I'm hoping to get the last 25 to under 12hrs. This should help:
[URL=http://s158.photobucket.com/user/chowderhead72/media/IMG_3140_zpsjkr0yvss.png.html]
[/URL]
[URL=http://s158.photobucket.com/user/chowderhead72/media/IMG_3140_zpsjkr0yvss.png.html]
[/URL]
Last edited:
I dunno...little strip o=copper?
I'll get it out the door, and we can figure something out one day.
I only have that one - don't seem to have a plated one!
I'll get it out the door, and we can figure something out one day.
I only have that one - don't seem to have a plated one!
The plated one is installed in the mod.I dunno...little strip o=copper?
I'll get it out the door, and we can figure something out one day.
I only have that one - don't seem to have a plated one!
- Status
Similar threads
