The costs of running this huge site are paid for by ads. Please consider registering and becoming a Supporting Member for an ad-free experience. Thanks, ECF team.

Cloudy DYI Coffee PG help

Discussion in 'Ask The Veterans' started by SuperTenere, Apr 19, 2014.

Thread Status:
Not open for further replies.
Image has been removed.
URL has been removed.
Email address has been removed.
Media has been removed.
  1. SuperTenere

    SuperTenere Full Member

    Feb 19, 2014
    Post Falls, Idaho, USA
    I started DYI and brewed some coffee in PG and it turned out cloudy, my concern is that let the PG get hotter than I wanted about 200 degrees, will this temperature hurt PG ? The brew smells fine, color good and has kind of a sweet tangy taste. :confused:
  2. salemgold

    salemgold ECF Guru Verified Member ECF Veteran

    Supporting member
    Jul 5, 2010
    South Carolina
    Not sure how you brewed it but, this is how I make mine.

    Fill a glass bottle with 1/2 coffee grounds and 1/2 pg. Nuke for 10 seconds. PG will be absorbed by the coffee so now add more PG to fill the bottle. Let solution sit in glass bottle inside of a coffee cup filled with hot tap water for about 20 minutes. Remove. Use a paper coffee filter attached to the inside side of a glass cup or jar with a chip clip or similar. Pour mixture into the paper filter and let it strain for a few hours. You now have a good coffee flavoring to use in your DIY mixes.

    I hope that helped and good luck!
Thread Status:
Not open for further replies.

Share This Page