Ok, I bit the bullet, couldn't wait for the new rabbit, against my better judgement I pulled my coils from my rabbit and rebuild it,yes now it's done and you are correct, it gets a bit hot but I've had hotter, it vapes like a champ and as I thought with the new coils it comes in at .30 ohm,not for the faint hearted as it takes a big mod to run it, I'm loving it haha
- Status
Surprisingly it's a cool vape but the tank gets hot, I think it would work a lot better with the rda rabbit as there is more room, oh well, one experiment done and dusted, so yeah it works, flavour is superb, it gets hot, need a big mod to run the coils I used, but in all I think it's a part success and the RDA would work better
For some reason I always get mesmerized that the electricity knows how to split up evenly. It would seem to me the posts with two leads would heat up twice as fast as the one with 4. But the electricity is like, “I got this, fool”.
With the cap on does it burn your juice and make it brown/black at all? In the rda it will be nice and spacious with lots of room and air.
With the cap on does it burn your juice and make it brown/black at all? In the rda it will be nice and spacious with lots of room and air.
This ladies and gentlemen is a not necessarily perfect, but effective .2 that was supposed to be a .25, but it’s a new deck and it does what it wants. I think I’m going to still use it though because it should come in at right around 21 amps and that’s well under 35. So I’m going to wick it and see how it vapes.
I've done 3 tanks of juice and not noticed any colour change although I don't think the juice stands a chance to turn black cause the coils sup juice like crazyFor some reason I always get mesmerized that the electricity knows how to split up evenly. It would seem to me the posts with two leads would heat up twice as fast as the one with 4. But the electricity is like, “I got this, fool”.
With the cap on does it burn your juice and make it brown/black at all? In the rda it will be nice and spacious with lots of room and air.
Goon 1.5.
If you’re still considering one I think you would be pretty happy with it. It’s got tons of room and airflow. Comes with a squank pin too.
If you’re still considering one I think you would be pretty happy with it. It’s got tons of room and airflow. Comes with a squank pin too.
I'm considering getting one but first I'm going to get a squonk mod and try a few of my rdas with the squonk pins fitted.
Any recommendation's for a squonk mod as this will be the first time ive used one.
I've read about leaky bottles and dodgy squonk mods so I want to get it right first time.
Thanks
Any recommendation's for a squonk mod as this will be the first time ive used one.
I've read about leaky bottles and dodgy squonk mods so I want to get it right first time.
Thanks
Last edited:
I’ve been eyeballing Topsides, I like the dual but the single takes 21700 and may get my vote. I like the pico squeeze 2 and there’s been a sale on them for $19-25 at I think Sourcemore, I would have to check the shinyitis thread. I like the Lost Vape Drone 250c but it’s really expensive (notorious leaker from what I read, kinda hit and miss) and then if you like mechs Pryingeyevapes is selling Purge ultem squonk boxes for $99. I had to have that Purge so that is what the Goon is going on.
Check out the 2 Shinyitis threads along with the Are You Currently Stocked thread in General Vaping and people post deals all day long you can look out for. Lots of squonks pop up there. They really like the Asmodus Luna and it’s on sale for $29 if they haven’t bought them all yet. (They’re working hard on it)
Check out the 2 Shinyitis threads along with the Are You Currently Stocked thread in General Vaping and people post deals all day long you can look out for. Lots of squonks pop up there. They really like the Asmodus Luna and it’s on sale for $29 if they haven’t bought them all yet. (They’re working hard on it)
Hey Marper, after spending some time with the Goon I think I found one strike against it that I hadn’t heard anyone mention. With the way the airflow is set up, it has the big cyclops cuts on the side and the top cap has three cuts for dual/single airflow. With the way it is if you like a restricted pull you can’t really do it because if you go below halfway, the single coil slit comes into play. So you can restrict it technically but one side will be two holes on either side with the center blocked. You can’t get real precise with where you want your air coming in.
I don’t know why they did that, it’s not like a stacked airflow where you can keep the dual and single separate, they interfere with each other. Maybe a minor detail but it bugs me.
I don’t know why they did that, it’s not like a stacked airflow where you can keep the dual and single separate, they interfere with each other. Maybe a minor detail but it bugs me.
Last edited:
3mm ID ss316L Staggered Fused Clapton on the .Blank deck came to a sexy 0.25 ohms
And considering I've been vaping with a 0.6 ohm MTL coil in the Galaxies, This is gonna knock my Head Off
And considering I've been vaping with a 0.6 ohm MTL coil in the Galaxies, This is gonna knock my Head Off
I went shopping today and spent a fortune, I got a freemax twister and a topside dual squonk mod
Let me know how you like that Topside. I can’t decide on single or dual. From what I see they’re both winners though, I just have no personal experience with 21700 battery life. Which color did you pick up?
I'll let you know, I got the blue cause that's all he had left, I got it for 60 uk and he gave me a load of juice and a spare squonk bottle, so good value me thinks. I've got an ljoy genie mod that uses 2 21700 batts, very good so I think they would be ideal in a single mod, I'll post some coil pics later on with the dual
Collection of coils from the years, mostly fused clapton's ( 30x6/40g ) and some alien's
Last edited:
- Status
