couple of atty and mod questions

[morbid4joint20]

Exactly how does a bottom feed work and does it use a regular atomizer. Plus im getting an18650 setup of some kind with a low resistance atty. any suggestions on what type as far as thread size or differences. is there a good site for learning all about attys??

 

[dormouse]

Whoa that is way over my head. If you don't get an answer here, then ask in the mods section of ECF. If your 5th post was more than an hour ago then you should be able to post elsewhere on this board.

 

[wv2win]

Exactly how does a bottom feed work and does it use a regular atomizer. Plus im getting an18650 setup of some kind with a low resistance atty. any suggestions on what type as far as thread size or differences. is there a good site for learning all about attys??

Every PV including bottom feeds come with a specific atty connection such as a 510 and any 510 atty will work with it. The 18650 is the battery size and has nothing to do with the atty connection. If the PV has a 510 connection and you want to use an 801 for example, you just buy a 510 to 801 adapter ($4) and use an 801.

 

[mwa102464]

Most bottom fed mods don't really run that great with an adapter I wouldn't suggest going that way. I would see what style Atty you really like best and the 510 is a good choice since most bottom feeders have a native 510 connection and go that route. If you like another Atty like say a Mini 801 than I would look for an Mod with that native connection more so than to have to pump the liquid through an adapter. There is one Mod that runs well that has a native 510 connection as well as special 901 and 801 adapter and that's the Ali'i it uses a specific adapter with a brass tube running up the center to get the liquid to the Atty better, you can also buy these special adapters and use them with other bottom feeders but I suggest sticking with a native 510 for your bottom feeder choice of Mods, just my 2c