Cyclone Lovers

[egrets]

Well, I tried ordering the cyclone from mov on my phone, keep saying declined which shouldn't happen. So I order on my desktop and that goes fine. Guess what, I just check my bank and it's showing 4 tries from MOV each holding over $60 so my bank now have no more funds available and it's showing negative...

So, if you want to buy it, don't use the mobile site. At least it's not working on my iPhone.

Coupon code: SYNDROME15 gets 15% off. I paid less than $62 including priority shipping.

 

[GreatestUnKnown]

Not trying to bash the Cyclone 2014 but I think they missed with this one.

+1 for them putting the BF hole level with the deck, allows for great drainage.
-1 for going with a flat deck over the concave of previous versions.

This last one is merely speculation because I do not have one in hand to physically prove, but the lip on the deck to help prevent leakage might actually impede airflow when used with an AFC cap. The AFC "cyclops" slots are fairly low on the deck when used with the older Cyclone and if this new one comes with the standard cap I dont know if it will be compatible with the AFC cap...just my

I am glad though that they are still making a great rda for the BF market and if I wasnt already buried under RDAs not in rotation I would probably pick one up to try out.

 

[Chowderhead1972]

Not trying to bash the Cyclone 2014 but I think they missed with this one.

+1 for them putting the BF hole level with the deck, allows for great drainage.
-1 for going with a flat deck over the concave of previous versions.

This last one is merely speculation because I do not have one in hand to physically prove, but the lip on the deck to help prevent leakage might actually impede airflow when used with an AFC cap. The AFC "cyclops" slots are fairly low on the deck when used with the older Cyclone and if this new one comes with the standard cap I dont know if it will be compatible with the AFC cap...just my

I am glad though that they are still making a great rda for the BF market and if I wasnt already buried under RDAs not in rotation I would probably pick one up to try out.

Flat deck on the new one? Jeez... I missed that part. VA is getting lazy.

 

[GreatestUnKnown]

Added a picture from MOV of the deck and at a second look I dont think the lip should interfere with the AFC cap "cyclops" slots. So if you need one of these BF in your life get it cause I am sure there will be some LE AFC caps coming in the near future.

 

[pauly3]

Price is GREAT and so is MOV! As far as the changes IMO they should've kept it the same. The concave deck on the prior version is awesome and helps the juice get back into the tube after releasing your squonk. I got one from the last batch that MOV sold and my juice hole is right near the deck (I believe prior runs were a few mm higher) so it was never an issue for me.

 

[Chowderhead1972]

I foresee the price of V1 TF versions going through the floor. Time to stock up...

 

[elscorcho]

I foresee the price of V1 TF versions going through the floor. Time to stock up...

SHORT the new version and back up the truck on concave-deck versions!

 

[muzichead]

I have to agree with Clark on this one. If in fact they changed the deck to being flat that is a negative in my book. That is one of the best features I like about my Cyclone. I wish more vendors made their decks concaved...

 

[Dconnor]

I have to agree with Clark on this one. If in fact they changed the deck to being flat that is a negative in my book. That is one of the best features I like about my Cyclone. I wish more vendors made their decks concaved...

I originally bought mine for the concave deck. Best feature IMO. If you like that deck design w/o AFC, check out the YK1 at Fasttech. It is a nice little clone, and with the cap off I can't tell the difference from my Cyclone.

 

[Steamer861]

Like This? For any one who is willing to mod this to BF This is a good Price
vapeday - Cyclone Top Feed Atomizer

I foresee the price of V1 TF versions going through the floor. Time to stock up...

 

[Highwayman1224]

Well, I tried ordering the cyclone from mov on my phone, keep saying declined which shouldn't happen. So I order on my desktop and that goes fine. Guess what, I just check my bank and it's showing 4 tries from MOV each holding over $60 so my bank now have no more funds available and it's showing negative...

So, if you want to buy it, don't use the mobile site. At least it's not working on my iPhone.

Coupon code: SYNDROME15 gets 15% off. I paid less than $62 including priority shipping.

I should have listened to you and not tried to use my phone, lol. Ended up with 3 being shipped! I ordered last night and woke up this morning with 3 orders being shipped already! Called them today but she said the mailman already came, that's fast shipping! May just keep them cause you can never have too many atties.... LOL

 

[Highwayman1224]

Picked up my cyclone from the post office today that I ordered from the UK last week. Stuck my new drip tip on it from Drip Tip Designz & built a quick coil that came out to .88. It's not bad, but need to open up the airhole as it's a little too tight for me.

 

[Chowderhead1972]

Like This? For any one who is willing to mod this to BF This is a good Price
vapeday - Cyclone Top Feed Atomizer

Been there bought that.. Great people to deal with, slow shippers though.

 

[Steamer861]

With the shipping cost and import fees I have bin bidded out of this one but If your in the US there is free shipping and no import charge so mite still be a good deal for you
Vicious Ant AFC Cyclone RDA RBA Atomizer Bottom Feed 100 Authentic | eBay
hope it's ok to post the ebay link??

 

[unsure]

With the shipping cost and import fees I have bin bidded out of this one but If your in the US there is free shipping and no import charge so mite still be a good deal for you
Vicious Ant AFC Cyclone RDA RBA Atomizer Bottom Feed 100 Authentic | eBay
hope it's ok to post the ebay link??

Hmmmm at the risk of asking a dumb question....I could have sworn the screws were phillips not allen? What's the wrench for?

 

[Robfisher]

Hmmmm at the risk of asking a dumb question....I could have sworn the screws were phillips not allen? What's the wrench for?

Nope the cyclone has allen key screws.

 

[unsure]

Nope the cyclone has allen key screws.

Thanks...This pic of SXD made me think that. http://www.e-cigarette-forum.com/fo...clone-users-i-need-help-lol.html#post13641929

I need another RBA just trying to figure if the extra money for a Cyclone is worth it over a RM from Rob.

 

[Highwayman1224]

The cyclone I just got from the UK has Phillips head screws. Thought they forgot to send the alen wrench till I noticed the screws. Just ordered another one from mountain oaks vapor and I think these also come with Phillips heads. I think the one I got from the UK & the one's from mountain oaks are new style one's because the feed hole is right at the bottom of the post where the one's I've seen pictures of are all higher up on the post.

 

[Robfisher]

I need another RBA just trying to figure if the extra money for a Cyclone is worth it over a RM from Rob.

There is not a lot of difference to the Vape between the RM2 and the Cyclone but I do prefer the Cyclone because it's so easy to just pull off the top and rewick and get going again... Sometimes when unscrewing the RM2 the whole thing comes off and sometimes the top is quite hard to screw off on some of mine. Also the Cyclone is a lot more forgiving on over squonking.

I have ordered a few of them for my collection. I highly recommend them! I just hope the changes to the new version are better and not worse than the original! I'm holding thumbs because I have a few coming from difference sites I ordered from!

 

[unsure]

The cyclone I just got from the UK has Phillips head screws. Thought they forgot to send the alen wrench till I noticed the screws. Just ordered another one from mountain oaks vapor and I think these also come with Phillips heads. I think the one I got from the UK & the one's from mountain oaks are new style one's because the feed hole is right at the bottom of the post where the one's I've seen pictures of are all higher up on the post.

Oh yeah...your right.....

Includes:

•Cyclone logo on the top cap
•Vicious Ant and 2014 engraved on the underside of the base
•Phillips head screws on the posts
•New shape for the juice well


Thanks. See folks I'm not going crazy...always unsure but not crazy.

Do you have a RM too and is the Cyclone better?