saw these on madvapes tonight and picked up a few in 1.8.
DCT Pro Coil
anyone have experience? I'm hoping for something awesome.
DCT Pro Coil
anyone have experience? I'm hoping for something awesome.
DCT Pro Coil
- Thread starter solace.discord
- Start date
- th_trl_thread_readers 0
- Status
If these are even related to the product that was very similar that they used to call the dct ce2 carto, then it's junk. I couldn't get the thing to not flood. Hopefully, it's not the same thing, because just filling the tank would flood the old ones. No primer puff or initial vape, just gurgle and pour...
Why you would take something as consistent and awesome as a carto tank and put something that turns it into a BCC is beyond me
description says they "are extremely resistant to leaking and flooding." replacement cartos with thread, instead of fill.. I have hopes, and reservations.
did a search and came up with someone else asking the same, with no response from earlier this month.
did a search and came up with someone else asking the same, with no response from earlier this month.
the hit and miss of priming while under extreme anticipation, for one... LOL
Meh, I can prime a carto in about 30 seconds. Have a video in my blogs of me priming a fresh carto 
With the amount of filler in a carto once its wicking you can chain vape like crazy and no burns, something I have yet to get with any wicked atty...unless I pull wicks, and then when I don't vape for a while it floods out on me. I still use an original protank as well as my carto tank, mainly because the protank is a much weaker vape, and easier to handle on my throat in the AM or after a a while of no vaping
Maybe one of these days ill buy some wire and start rebuilding my own, which probably work light years better, but for now im taking the easiest and most reliable method ive found
With the amount of filler in a carto once its wicking you can chain vape like crazy and no burns, something I have yet to get with any wicked atty...unless I pull wicks, and then when I don't vape for a while it floods out on me. I still use an original protank as well as my carto tank, mainly because the protank is a much weaker vape, and easier to handle on my throat in the AM or after a a while of no vapingMaybe one of these days ill buy some wire and start rebuilding my own, which probably work light years better, but for now im taking the easiest and most reliable method ive found
familiar with cartos.. love them, prefer them, live them. used to swear by BCs..
hence my curiosity about these .. the design and how well they work.. guess I'll find out in a few days!
hence my curiosity about these .. the design and how well they work.. guess I'll find out in a few days!
Last edited:
I hear you, I tend to do the same thing and test out random things from time to time. Always just end up using the old trusty though =( If you want a super quick way to prime those cartos tho check out my vid, I put em in the tank dry, and im vaping in 30 seconds!
I was talking to MadVapes about those as well. I guess since you've already ordered them, I'll let you be the test pilot. Very interested to get your read on 'em.
They suck, and don't wick for 
. The reason I even still use cartomizers is the flavor and vapor production. A vertical coil surrounded by a wick will function better than a standard coil with a wick in it.
. The reason I even still use cartomizers is the flavor and vapor production. A vertical coil surrounded by a wick will function better than a standard coil with a wick in it.
thanks for the input! if I like them, superb.. if not, they go in "the drawer" with the other borked purchases, waiting for the day a vape emergency happens.
arrived today! filled the tank and checked the ohms.. 1.9. great vapor! trying a light fruity juice, there is flavor loss in comparison to a traditional carto. but I've been vaping Snickerdoodle all day, so my taste buds may be shot.
it is quieter than what I've been used to. the side holes are large, and the wick and coil are on a base that sits near the upper curve of the hole. you can see through the hole under the wick. inside, it's sealed. get juice in the tube of the carto, and it will just stay there, from what I can tell.
granted, it's only been half hour, but no leaking or gurgling. going to try a stronger flavored juice, or drink a lot water and cleanse my pallet.. or load up some SnickerD.
I'm glad I have them.. time will tell how much I like them.
would be superb if they had holes to fill/drain from the tube. built-in tank tool!
it is quieter than what I've been used to. the side holes are large, and the wick and coil are on a base that sits near the upper curve of the hole. you can see through the hole under the wick. inside, it's sealed. get juice in the tube of the carto, and it will just stay there, from what I can tell.
granted, it's only been half hour, but no leaking or gurgling. going to try a stronger flavored juice, or drink a lot water and cleanse my pallet.. or load up some SnickerD.
I'm glad I have them.. time will tell how much I like them.
would be superb if they had holes to fill/drain from the tube. built-in tank tool!
Meh, I can prime a carto in about 30 seconds. Have a video in my blogs of me priming a fresh carto
Maybe one of these days ill buy some wire and start rebuilding my own, which probably work light years better, but for now im taking the easiest and most reliable method ive found
GREAT video volume control. I've changed cartos in the same way as you but never thought about turning the tank when the vliquid reached the level of the connection of the two cartos. Brilliant, simple, quick! Well done, and your "ugly mug"? Welp, it's not.
Since you use IBtanks, do you not ever use the thingie method?
Thank you (all) for the info on these pro coils. I just heard about them today, so Kurious Kat had to find out some info. I always THINK that one of these days I'm going to like vaping a clearo.... yeah, no. I still don't see it happening.
Konfirmed Karto tank Kween over here.
I ordered ten 1.8 ohms a few weeks ago and have never used a better carto. The flavor is over the top, they last about a week for me(I smoke 40ml+ a week), the vapor is thick and I don't need as much wattage to get the same vapor which means I don't recharge my batteries as often. I was so impressed with them I tried to order more after researching where I could buy them. Madvapes and Alibaba were the only two places and Alibaba had a 300 quantity minimum order. Madvapes had sold out and is still sold out(3-15-2014) of the 1.8 ohms so I bought 15x 2.4ohm pieces. It's been almost two weeks and Madvapes still doesn't have the 1.8 or 2.4ohm versions in stock. 3.0ohm is all Madvapes has in stock.
I read above about leaking which I have not found in the versions I bought. however the only problem for me is excessive juice on my lips after vaping 5 or 10ml.
I read above about leaking which I have not found in the versions I bought. however the only problem for me is excessive juice on my lips after vaping 5 or 10ml.
- Status
Similar threads
- Locked
