Most definitely it should! I will try it out and re-post later! What guage twisted were you thinking about?
deedupdex builds! Variety in builds.
- Thread starter deedupdex
- Start date
- th_trl_thread_readers 0
- Status
Most definitely it should! I will try it out and re-post later! What guage twisted were you thinking about?
I got a spare rba that I need to try this quick setup in, I will be using 26g wire, is that strong enough for snap in trial?
I was thinking either two strand or three strand twisted 28 gauge.
Thanks for the awesome builds brother, keep it goin!
Most Definitely not recommended for an all day use due to the fact it might collapse and heat up if does not have strong enough contact or pressure. I wouldn't go any smaller than a 22ga for a daily carry. But you could use up to 26ga to just test coils and see it fire yes! Make sure you adjust your leads properly!
Yes that should be stiff enough!!! And thank you stay tuned I try to post every week. I have one coming tomm!
A simple quad coil 26ga "parasplit" build on the @datouch_customs Taurus. Starts out as a parallel vertical wrap 7/64bit @ 4 wraps then splits each ends into a 3/32bit 5/6 wrap on each side. The heat built up from the parallel vert coil travels fast to each of the 5/6 wraps. This was ohming at a conservative .29Ω (cool vape for me). You can build this at around .2Ω or .18Ω ish with less wraps on the split ends more like 3/4 or 2/3. This build has plenty of air pockets for airflow. If you have any questions regarding this build please feel free to ask on dm email or on fb and I will respond to you sooner or later. Thanks for checking it out guys and stay tuned for more future projects. I will throw up the firing vid tommorrow so please come back! PS: If I happen to forget to respond or oversee a question/email/ig direct please ask again! I might have simply just forgotten to get back to you guys. I'm here to help any way I can, and I do respond to each and one of your inquiry.
This SUNDAY 707 heads you gotta slide through for @ivbarberlounge 2 year anniversary and @vapelifeco 1 year anniversary vape meet!
3712 Sonoma Blvd Vallejo, CA
From 1-6pm
Come celebrate and meet/greet with everyone. A great way to bring the community together and celebrate. There will be raffles, food and Vallejo's very first CLOUD CONTEST!
Bring your A game and cloud blowing/building skills to the table. We are also having @thirdtribe @strictlyclothing @bayareabarberbrotherhood @deedupdex present. Music will be provided by @ricsolla @c__lo @kylemendozatho
You don't want to miss this one!!!
PS: Cloud contest rules will be posted on a separate flyer! Nearby shops are welcomed!
3712 Sonoma Blvd Vallejo, CA
From 1-6pm
Come celebrate and meet/greet with everyone. A great way to bring the community together and celebrate. There will be raffles, food and Vallejo's very first CLOUD CONTEST!
Bring your A game and cloud blowing/building skills to the table. We are also having @thirdtribe @strictlyclothing @bayareabarberbrotherhood @deedupdex present. Music will be provided by @ricsolla @c__lo @kylemendozatho
You don't want to miss this one!!!
PS: Cloud contest rules will be posted on a separate flyer! Nearby shops are welcomed!
A quick firing video of the "parasplit" build. Looks like I over dripped a bit by the looks of all the boiling liquid near the end of the video. Then it starts to really get going. But if you have any questions just ask. Seems alot of people on fb are already trying this build out. Happy Friday to you all and have a great weekend! Hope to see some of you at the ivbarberlounge and vapelifeco meet on sunday. Hmu for any questions about this build.
Click Image to open video:
Click Image to open video:
These builds are insane. The extension idea is genius, really opens up new possibilities.
I read that you got your atty holder from the switch. I'm in michigan and they don't appear to have any online sales. Do you have any more information on the holder? A brand? An actual name for it? I know lots of us would love to have one.
Keep up the awesome builds bro. Inspirational.
I read that you got your atty holder from the switch. I'm in michigan and they don't appear to have any online sales. Do you have any more information on the holder? A brand? An actual name for it? I know lots of us would love to have one.
Keep up the awesome builds bro. Inspirational.
Nate first of all thank you for taking the time to come check out my builds. A lot wont even take the time to comment. It is much appreciated brotha. I will personally give you a direct link on how to get these. I will try to get them first and whoever wants them here I will help you out! Stay in tuned I will help you get one.
You sir are awesome. You're an innovator, and artist, and on top of that, willing to help. Keep on vaping bro.
Thank you Nate! I help out everyone on my Instagram or Facebook if they ever wanted to attempt any of my builds. They can reach me directly on pms, direct and or comments. I get back to everybody eventually. I will talk to a guy about the rda holder for you. worst comes to worst I will make my own and you can have the very first prototype.
Thank you very much for dropping by and checking them out. If you ever need help or want to try any of them out I am here to help any way I can!
Holy amazing!
I am working on a build inspired by you currently. I twisted 2 piece of 28 gauge together to create extensions on my igo-w. Just have the extensions done and gotta get to sleep. When I wake up I plan on attaching 3 one Ohm coils . Dubbing it the luxor coil.
Really glad I discovered this thread. Completely changed my coil game.
I am working on a build inspired by you currently. I twisted 2 piece of 28 gauge together to create extensions on my igo-w. Just have the extensions done and gotta get to sleep. When I wake up I plan on attaching 3 one Ohm coils . Dubbing it the luxor coil.
Really glad I discovered this thread. Completely changed my coil game.
keep doin what you're doin man, it's inspirational at the very least. Once my coil building gets better maybe I'll attempt some of your builds just for novelty sake and vaping at home hehe. Mind blowing builds, I'm sure cloud blowing too!
ddd, pretty sick looking coils and awesome photography skills bro. I personally keep my builds simple (and boring to look at) but yours look in-freakin-sane.
Rock on my skilled brother
Rock on my skilled brother
Got the 20 ga. in yesterday and did a few cloud comp builds. Time to start playing with extensions. 
Sadly I have to rip this out or buy another rda... 
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Sadly I have to rip this out or buy another rda... Sent from my SAMSUNG-SGH-I747 using Tapatalk
Lil "You" coil build. Dual double "You" 26ga on a 7/64 bit inner diameter. Originally wanted to make a quad but this thing was firing up too fast already as a dual. This thing makes a really dense burn. For cloud chasers I suggest bending the tips down a bit to avoid a dry hit when taking those long drags. Place cap hole directly in front of the lowest coil as it flows upwards past the other coils. Firing video will be up tomorrow along with a in depth explanation on how to bend these bad boys. Had to rush building a bit due to the Sharks vs Ducks hockey game haha. Go Sharks!!!
A lil firing vid of the "you" build. Check previous post for details on the build on the igow. Email, fb pm, forum pm, or IG direct if you need any help with this. Once again I will get back to you sooner or later please be patient. Check next post in a few about an in depth look at each of the you coils. Also happy Friday and to all those lucky folks going to the @stellavapors exhibit tommorrow! Everyone else have a good weekend!
PS: I will get back to everyone posting in this thread tonight!
Click Pic for Video
PS: I will get back to everyone posting in this thread tonight!
Click Pic for Video
well sir, you are an original. Out of the thousands of people to build coils only you have taken it to this level. You are sure to inspire many more people to artistically approach coil building from now on. I applaud your efforts, thank you for your skills. Muse
- Status
Similar threads
