Digiflavor Siren GTA

[Katdarling]

Welp, Hot Diggity DAWG! I bet you guys are mega happy with this news, and to be honest, I'm happy FOR you!!!

I'm pretty much retiring my Digis at this point, because a) I don't know where an oring would go if it bit me on the face and 2) I don't know where the positive bloke is should I need to tighten him up.

I like a tank that needs no KatModding (because KatModding is actually kind of a bit of wishful thinking, and a misnomer at best).

But.

I AM happy for you guys! VERY much so, in fact!!!!! Go DIGI!!!!!


Having said that........ should they revamp the thing and make it an easy wicker/non-leaker, I'd be all over this little gas guzzler of ours. Oh yes, I would!

and building atomisers I find as appealing as cleaning the toilet at the best of times

Ummmmmmmm........ yes, yes, and more yes!

from an Italian modder

YAAAAAAAAAAAAAY!! Viva L'Italia!!!!!! Bravo, Xvagabondo! Not ALL modders are Greek.

 

[JustWondering1]

Here's my email to Digiflavor with our Siren wish list. I hope I included everyone's upgrades!

Thank you very much! I appreciate it. All of the vendors on your list are excellent and have great customer service. Are the Sirens already being made? Is it possible there will be additional runs of the Siren? I am asking because some of the posters on ECF found that simply tightening the pin and putting a grommet or seal below the positive block -- around the airtube -- will keep juice from seeping through the afc at times. I'll buy a ton of the Sirens whether you make changes to the Siren or not, because it is my favorite RTA by far, but I thought you might like to see a short list of Siren upgrades the posters on ECF have put together below:

Make sure the positive post is tightened up as much as possible.

Use a grommet or some sort of seal below the positive block -- around the air tube -- to prevent juice seepage.

Smooth out the threads on the top cap.

Make one or two smaller airflow holes on the airflow controller.

Consider making the wick holes just a little bit smaller.

If you'd like to see our ECF thread that's dedicated to the Siren, please click on the link below.

Digiflavor Siren GTA

You've made a lot of vapers very, very happy!!



Thanks again!

 

[JustWondering1]

See the a list below of some of the U.S. vendors who have already ordered the Sirens!

hi, some of our customers have booked siren already. you can check with them as below. thanks.
VaporDNA | Premium E-Cig Store & Vaping Gear Shop
Element Vape
Eciggity | Premium E-Cig Hardware, E-Liquid & Accessories

 

[52anddone]

I had this in my email today from Digiflavor.

hi, good news. with discussion this morning, because so many customers are asking for more siren 22 or 25.
We plan to reproduce 1000pcs for each color and type. Please check with your local shops there. I believe
it will go back to market soon. thanks for your attention.

2017-05-22

Really ?? Great news, especially since we here have found the solution to the Siren's ill's. As always though, I'll believe it when I see it. Thanks Riplea (BTW, I watched Alien 3 and Alien Resurrection over the weekend). Just thought you might be amused in that.

 

[52anddone]

Hey 52 I ordered the 4mmx1mm, hope i'll have more Sirens to use them with.

Sounds like a distinct possibility bob. Glad I could help you out.

 

[52anddone]

just checking back in.

Sorry to hear a lot of you still have the leaking issue. I bought two, and one of them never leaked. The second one had leaking issues for two or three days, but I haven't had an issue for well over a month now. For the life of me, i don't know what i did differently, but i'm not gonna stress over it.

Glad to hear they're making some more. I really prefer SS to the black ones i have.

Not leaking/Seeping any more. Read back in this thread for the fix we found for the Siren. I just re-built my 22mm early yesterday afternoon (05-22). I had 21 tank fulls thru the same build when I did my re-build, and not anything more than some condensate every few tank fulls that I wiped off from around my air flow ring with a paper towel.

 

[52anddone]

That's very good news! I'll definitely buy some from MyVPro too. Oh wow!! if they'll be available at the end of May, I am even happier!! I guess I know where my vape budget is going for the next few months!!

I think you will buy several more JW, like about 10 or so wouldn't surprise me??

 

[G-Fog]

Are you able to buy vape gear in New Zealand? I thought I heard vaping was highly regulated there.

No problem getting any kit in NZ, however nicotine containing e liquid is still banned, not that it stops anyone.
The government has recently decided that they will allow nicotine e liquids from next year, it remains to be seen what regulations they will attach to that though.

 

[Fad]

@JustWondering1

That`s great - as simple as it needed to be.

There`s no point trying to explain anything in detail, they a: don`t care and b: don`t understand anyway.

 

[green.on.green]

So happy for any & everyone looking to buy themselves the Siren

I have been using mine since January and have only faced leaking once when I didn't put enough cotton in there.

Sent from my ONEPLUS A3003 using Tapatalk

 

[green.on.green]

On a side note, does anyone know where we can purchase extra spare glass for the 22mm .

Myvpro has it listed for $4.40 . But was trying to see if anyone knows any vendors in China / Hong Kong?

Alternatively, any other tank's glass fits the Siren 22?

I live in India currently, myvpro wouldn't work out for me



Sent from my ONEPLUS A3003 using Tapatalk

 

[Fad]

Need to double check to be sure but doesn`t the Subtank Mini glass fit the Siren 22 ?

I think it does but isn`t quite tall enough allowing the siren base to screw in a bit more than normal. (or vice versa)

 

[green.on.green]

Need to double check to be sure but doesn`t the Subtank Mini glass fit the Siren 22 ?

I think it does but isn`t quite tall enough allowing the siren base to screw in a bit more than normal.

I did read that somewhere on reddit, but the glass sort of got stuck when I asked the vape shop at Vietnam to try it out.

Wasn't ideal and we didn't try figuring it out any further.

Sent from my ONEPLUS A3003 using Tapatalk

 

[Bigbob2322]

What is it you like better about the SS ones? I don't have any black Sirens, only the SS ones, because I don't have any black mods. The upcoming go-round of buying Sirens, however, I'm thinking of getting a couple of black ones because I've got my eye on a black mod.

It's easyer to see the air holes on the SS when you dial it half way on a hole.

 

[Fad]

I did notice the top cap threads feel better on the black than the steel - it must be the paint.

(The thread pitch is way too fine on the top cap anyway)

 

[52anddone]

(The thread pitch is way too fine on the top cap anyway)

Way, Way too fine of thread pitch.

 

[JustWondering1]

I think you will buy several more JW, like about 10 or so wouldn't surprise me??

At least 10 more!! Especially after my Hussar pin problem! I love the Siren and it just works for me! It's my vapocalypse atty of choice. I'll probably experiment somewhat with other RTAs, just for fun, but the Siren is my number 1!

 

[JustWondering1]

No problem getting any kit in NZ, however nicotine containing e liquid is still banned, not that it stops anyone.
The government has recently decided that they will allow nicotine e liquids from next year, it remains to be seen what regulations they will attach to that though.

I'm happy your government is easing things up a bit, and I hope those new regs are kind to vaping.

 

[JustWondering1]

On a side note, does anyone know where we can purchase extra spare glass for the 22mm .

Myvpro has it listed for $4.40 . But was trying to see if anyone knows any vendors in China / Hong Kong?

Alternatively, any other tank's glass fits the Siren 22?

I live in India currently, myvpro wouldn't work out for me



Sent from my ONEPLUS A3003 using Tapatalk

I've got a Subtank Mini glass in one of my Sirens and it's working fine. It's not the greatest fit ever, but it works. If you want the Siren glass, however, why don't you send an email to Digiflavor in China and ask them where in China you can find replacement glass? Their email address is info@digiflavor.com. Hope they help you.

 

[JustWondering1]

It's easyer to see the air holes on the SS when you dial it half way on a hole.

Got it. That makes sense. Thanks.