Digiflavor Siren GTA

[Mazinny]

What is it you like better about the SS ones? I don't have any black Sirens, only the SS ones, because I don't have any black mods. The upcoming go-round of buying Sirens, however, I'm thinking of getting a couple of black ones because I've got my eye on a black mod.

Mostly cosmetic really, also it's a minor thing, but it's difficult to tell with the black one, which air-flow hole is open

For me it's not so much leaking as it was seepage. After the first tank there'd be a thin film around the airflow ring, after the second refill it'd get worse, and so on. I'd have to keep wiping it off. I mean I guess that was leaking technically speaking, but it wasn't like it was flowing out. Now that I've tightened the positive post down it's been dry and I'm loving my Siren all the more.

Not leaking/Seeping any more. Read back in this thread for the fix we found for the Siren. I just re-built my 22mm early yesterday afternoon (05-22). I had 21 tank fulls thru the same build when I did my re-build, and not anything more than some condensate every few tank fulls that I wiped off from around my air flow ring with a paper towel.

Thanks guys, i did gloss over the posts re. the fix. If i have any issues re seepage/leaking , i will read more carefully. I had the same seepage issue for a couple of days with one of mine, but it took care of itself for some reason. All i can think i did differently was to tighten it up more forcefully when re-assembling.

 

[JustWondering1]

Mostly cosmetic really, also it's a minor thing, but it's difficult to tell with the black one, which air-flow hole is open



Thanks guys, i did gloss over the posts re. the fix. If i have any issues re seepage/leaking , i will read more carefully. I had the same seepage issue for a couple of days with one of mine, but it took care of itself for some reason. All i can think i did differently was to tighten it up more forcefully when re-assembling.

It may be that your seepage stopped when the level of liquid dropped below the top of the build chamber. Not filling it with juice above the top of the chamber, making sure the afc is closed when filling it and making sure to cram loads of cotton in the coil are what works to keep my Siren from seeping.

 

[green.on.green]

I've got a Subtank Mini glass in one of my Sirens and it's working fine. It's not the greatest fit ever, but it works. If you want the Siren glass, however, why don't you send an email to Digiflavor in China and ask them where in China you can find replacement glass? Their email address is info@digiflavor.com. Hope they help you.

Thanks for the suggestion

I never heard back from them in regards to the previous email I sent 1.5 months ago . Maybe they just missed it though.

That email was requesting them to continue production for the Siren 22 and providing links to ECF, ft forums etc where one could see demand is high for the Siren.

Will email them regarding the spare glass and update here if they provide a link for purchase

Sent from my ONEPLUS A3003 using Tapatalk

 

[JustWondering1]

Thanks for the suggestion

I never heard back from them in regards to the previous email I sent 1.5 months ago . Maybe they just missed it though.

That email was requesting them to continue production for the Siren 22 and providing links to ECF, ft forums etc where one could see demand is high for the Siren.

Will email them regarding the spare glass and update here if they provide a link for purchase

Sent from my ONEPLUS A3003 using Tapatalk

Maybe in addition to Digiflavor you should email one of the China retailers of the Siren and ask them to order the spare glass for you. Of course, we have to find out where in China they'll be selling them. I know before they ran out Heaven Gifts, either 3FVape or 3AVape, and Efuntop carried the Siren.

I'll keep thinking about this and I'll let you know if I have any other ideas.

 

[green.on.green]

Maybe in addition to Digiflavor you should email one of the China retailers of the Siren and ask them to order the spare glass for you. Of course, we have to find out where in China they'll be selling them. I know before they ran out Heaven Gifts, either 3FVape or 3AVape, and Efuntop carried the Siren.

I'll keep thinking about this and I'll let you know if I have any other ideas.

To add to the list, a very helpful vendor I have found is sourcemore . Great customer service and so far the best English I have come across.

Few sellers on Aliexpress could work as well.

On a side note, I read a few places that the Siren 25mm has been facing some issues due to the glass? For anyone who might find this useful. I found a VapeSoon glass replacement for the 25mm listed on aliexpress :

100% VapeSoon Replacement Glass Tube For Digiflavor SIREN 25 GTA Atomizer Clear Glass Tube
http://s.aliexpress.com/NzYV3Ef2


Sent from my ONEPLUS A3003 using Tapatalk

 

[JustWondering1]

Just got the email below from myvpro.com. He says he will have the Sirens ahead of everyone else and he is expecting them during the week of June 1!!

YAY!

 

[JustWondering1]

To add to the list, a very helpful vendor I have found is sourcemore . Great customer service and so far the best English I have come across.

Few sellers on Aliexpress could work as well.

On a side note, I read a few places that the Siren 25mm has been facing some issues due to the glass? For anyone who might find this useful. I found a VapeSoon glass replacement for the 25mm listed on aliexpress :

100% VapeSoon Replacement Glass Tube For Digiflavor SIREN 25 GTA Atomizer Clear Glass Tube
http://s.aliexpress.com/NzYV3Ef2


Sent from my ONEPLUS A3003 using Tapatalk

Wow!! That's very cool. There are a lot of people who will be very happy about this find! Just for the heck of it I tried to use the fat boy Clieto glass on my Siren tonight, but it was not a good fit. I'll probably keep trying out other 22 mm spare glasses in the Siren, just to see if I can find another one that works.

The problem with the 25 mm Siren I think you are referring to is it's see-through build chamber. While the build deck isn't visible until you remove the base of the tank, the 25 mm Siren has a little window in the walls of the build chamber, allowing one to show off their builds without disassembling. That window can sometimes fall apart, which is not a good thing.

 

[green.on.green]

Wow!! That's very cool. There are a lot of people who will be very happy about this find! Just for the heck of it I tried to use the fat boy Clieto glass on my Siren tonight, but it was not a good fit. I'll probably keep trying out other 22 mm spare glasses in the Siren, just to see if I can find another one that works.

The problem with the 25 mm Siren I think you are referring to is it's see-through build chamber. While the build deck isn't visible until you remove the base of the tank, the 25 mm Siren has a little window in the walls of the build chamber, allowing one to show off their builds without disassembling. That window can sometimes fall apart, which is not a good thing.

I didn't read much into the issue honestly. As I don't own the 25 and never intended to buy one.

But happy to share the link for the glass replacement

Btw, thanks for trying out more spare glasses on the 22. You are a super helpful soul !

I was thinking of measuring the glass on the 22 and looking up spare glass specs online to see a good match. Will update for sure, if something comes out of it.

Sent from my ONEPLUS A3003 using Tapatalk

 

[JustWondering1]

I just got an email from My

I didn't read much into the issue honestly. As I don't own the 25 and never intended to buy one.

But happy to share the link for the glass replacement

Btw, thanks for trying out more spare glasses on the 22. You are a super helpful soul !

I was thinking of measuring the glass on the 22 and looking up spare glass specs online to see a good match. Will update for sure, if something comes out of it.

Sent from my ONEPLUS A3003 using Tapatalk

You are welcome! The specs are a great idea! Thank you. I look forward to hearing what you find!

 

[Xvagabondx]

By the way I found out an Italian site that lists replacement glass for both the Siren 22 and 25.

I haven't tried it myself, but on other hardware the shop it's pretty reliable!

Here's the link

 

[green.on.green]

By the way I found out an Italian site that lists replacement glass for both the Siren 22 and 25.

I haven't tried it myself, but on other hardware the shop it's pretty reliable!

Here's the link

For people in the US , myvpro sells the authentic glass :

22mm Siren (22) Replacement Clear Glass Tube By DigiFlavor

25mm
Siren (25) Replacement Clear Glass Tube By DigiFlavor

I was hoping more of a Chinese / Hong Kong based seller so that I can have it shipped to India .

Though the link you provided should help a lot, for folks living at Italy and the near by countries

Sent from my ONEPLUS A3003 using Tapatalk

 

[DPLongo22]

one of these

plus one of these

makes one of these

View attachment 658745





Number 003393. D'oh!!!!!!!!

Kat filled me in on all the news (although I haven't seen the posts yet). I'm thrilled for all shoppers!!!

 

[JustWondering1]

By the way I found out an Italian site that lists replacement glass for both the Siren 22 and 25.

I haven't tried it myself, but on other hardware the shop it's pretty reliable!

Here's the link

That's a great find.

 

[DPLongo22]

Waiting for the siren 22 to be available again to compre with the 25, I wish I had the money to spend on this beauty:

I'm not sure if this modder is known in USA but his product seems to be great in terms of flavor and overall, and the looks are amazing ... pity it's worth 160€, around 170$

Looks great! LOVE the mod too, just by the way.

 

[Fad]

Random musing of the day:

The Siren would benefit from the addition of a Kraken V2 style top cap - the "bayonet" method - do away with the threads altogether.

 

[Nailz]

I don't want to jinx myself, but I did the tighten of the positive block on one of my siren's, and after 3 fills, this thing has not seeped a bit at all, normally when I re-wick, the 1st tank is dry, but then after refilling, I will get the dreaded seepage.

If it continues to stay dry, might have to dig out my other siren's and try them again too, I love the flavor and ease of the siren, but I start using other tanks due to the seepage, so keeping my finger crossed that the tightening of the positive block has fixed it, will say it wasn't really loose before, but sure wasn't tight either.

 

[Fad]

Tightening down that block will definitely have an effect - the seal is added insurance against prolonged seepages

It`s just like putting an extra pair of special panties on granny when going to a wedding...

not something you want to do, but worth doing anyway.

 

[DPLongo22]

I don't want to jinx myself, but I did the tighten of the positive block on one of my siren's, and after 3 fills, this thing has not seeped a bit at all, normally when I re-wick, the 1st tank is dry, but then after refilling, I will get the dreaded seepage.

If it continues to stay dry, might have to dig out my other siren's and try them again too, I love the flavor and ease of the siren, but I start using other tanks due to the seepage, so keeping my finger crossed that the tightening of the positive block has fixed it, will say it wasn't really loose before, but sure wasn't tight either.

Don't feel bad, Nailz. Mine are so dayum random that I think I'd have better luck picking a lottery ticket.

I keep using it though, cuz I like 'em. But they never leave my desk, and paper towels are never more than an arm's reach away. A vaper's lament.

 

[Fad]

The Siren is like a trailer park adopted child...

you don`t know whether to toss it into the trash or smash it into submission.

 

[DPLongo22]

The Siren is like a trailer park adopted child...

you don`t know whether to toss it into the trash or smash it into submission.

:LIKE!!!!!!