Digiflavor Siren GTA

[Bigbob2322]

Thanks you guys for having the mettle to deal with these lot directly - I would be exasperated after 30 seconds.

/magic wish directly to the Digiflavor's designer's brain

I really would like at least one more IF the wick holes are smaller, I`m preferring to use a 2.5 ID coil these days, they are quieter and just seem to work a bit better...

...and better threading on the top cap...

...and some more airholes for the tighter MTL people

A better seal for the seeping issue and everything else you said.

 

[Fad]

I was editing that in as you were typing

How I missed it originally, I don`t know.

 

[JustWondering1]

Thanks you guys for having the mettle to deal with these lot directly - I would be exasperated after 30 seconds.

/magic wish directly to the Digiflavor's designer's brain

I really would like at least one more IF the wick holes are smaller, I`m preferring to use a 2.5 ID coil these days, they are quieter and just seem to work a bit better...

...and better threading on the top cap...

...and some more airholes for the tighter MTL people...

....and proper sealing by default !!!

I'll send your wish list to them after I find out when and where they'll be available in retail outlets. I've read about your leaking fix and I'd like to let them know about that as well. Since I am dealing with the China location of Digiflavor, and there is a communication barrier, I am trying to keep my language as simple as possible. Would I be correct in telling Digiflavor that your leaking fix involves:

1. Tightening the pin

2. placing a 4mm x 1mm o-ring under the positive block and around the air tube, then tightening the air tube until the positive build block smashes the o-ring flat

I want to make sure I communicate your leaking fix to them properly, so please edit me.

Thanks!

 

[JustWondering1]

Hey 52 I ordered the 4mmx1mm, hope i'll have more Sirens to use them with.

I went to Phil Busardo's new site, mtlvapors.com, and sent a message about the new run of Sirens and asking them to make sure they stock them. I'm also going to suggest the same to Eciggity, Element, and MyVpro, because all of them were offering the 22 for $26.99 originally.

My fingers are crossed!!

 

[Fad]

They would likely have the resources to acquire a better method of sealing than an o-ring.

I would have said a grommet or "seal" below the positive block - around the airtube, would be more like something they would do having access to all those bits and pieces we see on different things.

Not sure how to word that appropriately in UN-Chinglish so they understand..I`m off to bed now so will try to think about it.

 

[JustWondering1]

They would likely have the resources to acquire a better method of sealing than an o-ring.

I would have said a grommet or "seal" below the positive block - around the airtube, would be more like something they would do having access to all those bits and pieces we see on different things.

Not sure how to word that appropriately in UN-Chinglish so they understand..I`m off to bed now so will try to think about it.

Excellent! Thank you!

 

[Xvagabondx]

Waiting for the siren 22 to be available again to compre with the 25, I wish I had the money to spend on this beauty:

I'm not sure if this modder is known in USA but his product seems to be great in terms of flavor and overall, and the looks are amazing ... pity it's worth 160€, around 170$

 

[JustWondering1]

Waiting for the siren 22 to be available again to compre with the 25, I wish I had the money to spend on this beauty:

I'm not sure if this modder is known in USA but his product seems to be great in terms of flavor and overall, and the looks are amazing ... pity it's worth 160€, around 170$

It's pretty! What is it?

 

[Xvagabondx]

It's pretty! What is it?

It's the vampire 2 by oxigene mods, but there was a limited batch :/

 

[JustWondering1]

It's the vampire 2 by oxigene mods, but there was a limited batch :/

Bummer! Did anyone make a clone of it?

 

[Bigbob2322]

Is that the Taifun BT ?

 

[Xvagabondx]

Bummer! Did anyone make a clone of it?

Not yet, although the atom it's about really fine machinery and, I guess, it's hard to reproduce to a satisfactory extent!

 

[Xvagabondx]

Is that the Taifun BT ?

Nah, Vampire 2, from an Italian modder

 

[Mazinny]

just checking back in.

Sorry to hear a lot of you still have the leaking issue. I bought two, and one of them never leaked. The second one had leaking issues for two or three days, but I haven't had an issue for well over a month now. For the life of me, i don't know what i did differently, but i'm not gonna stress over it.

Glad to hear they're making some more. I really prefer SS to the black ones i have.

 

[JustWondering1]

Not yet, although the atom it's about really fine machinery and, I guess, it's hard to reproduce to a satisfactory extent![/QU

just checking back in.

Sorry to hear a lot of you still have the leaking issue. I bought two, and one of them never leaked. The second one had leaking issues for two or three days, but I haven't had an issue for well over a month now. For the life of me, i don't know what i did differently, but i'm not gonna stress over it.

Glad to hear they're making some more. I really prefer SS to the black ones i have.

What is it you like better about the SS ones? I don't have any black Sirens, only the SS ones, because I don't have any black mods. The upcoming go-round of buying Sirens, however, I'm thinking of getting a couple of black ones because I've got my eye on a black mod.

 

[JustWondering1]

Please see the email I got from Eciggity below in response to my email to them letting them know there will be more Sirens available soon. I'm getting excited about this!!

Good news, we apparently have our pre-orders in for the 22mm. Currently the 22mm is still under production and we will be getting them in as soon as Digiflavor is ready to ship them out. So we're hoping at the earliest, next month.

I'd say next month is probably too soon. I think July is more likely, but I'll take them any time I can get them!!

Yippieeeee!

How 'bout that Eciggity customer service???

 

[G-Fog]

Looking forward to that.

 

[JustWondering1]

Looking forward to that.

Are you able to buy vape gear in New Zealand? I thought I heard vaping was highly regulated there.

 

[kungfoogorilla]

Sorry to hear a lot of you still have the leaking issue.

For me it's not so much leaking as it was seepage. After the first tank there'd be a thin film around the airflow ring, after the second refill it'd get worse, and so on. I'd have to keep wiping it off. I mean I guess that was leaking technically speaking, but it wasn't like it was flowing out. Now that I've tightened the positive post down it's been dry and I'm loving my Siren all the more.

Please see the email I got from Eciggity in response to my email to them letting them know there will be more Sirens available soon. I'm getting excited about this!!

I just got a return email from Digiflavor. The way it was worded made it sound like they'd be available exclusively at MyVPro, but I probably misread or bad English on their part if ECiggity said they were getting them in. Which is good, I like Eciggity and that's where I ordered my second Siren. The rep said MyVPro should have them by the end of May (rather they were hoping end of May, but either way very soon), so maybe they're just getting the first run. I've never used this vendor before, anyone know anything about them? Looks like a vendor based in Michigan.

 

[JustWondering1]

For me it's not so much leaking as it was seepage. After the first tank there'd be a thin film around the airflow ring, after the second refill it'd get worse, and so on. I'd have to keep wiping it off. I mean I guess that was leaking technically speaking, but it wasn't like it was flowing out. Now that I've tightened the positive post down it's been dry and I'm loving my Siren all the more.



I just got a return email from Digiflavor. The way it was worded made it sound like they'd be available exclusively at MyVPro, but I probably misread or bad English on their part if ECiggity said they were getting them in. Which is good, I like Eciggity and that's where I ordered my second Siren. The rep said MyVPro should have them by the end of May (so very soon), so maybe they're just getting the first run. I've never used this vendor before, anyone know anything about them? Looks like a vendor based in Michigan.

That's very good news! I'll definitely buy some from MyVPro too. Oh wow!! if they'll be available at the end of May, I am even happier!! I guess I know where my vape budget is going for the next few months!!