I soaked mine in hot water for awhile first.
That pretty much got rid of the rubber taste.
Direct Drip Cart Mod (DDC)
- Thread starter Porphy
- Start date
- th_trl_thread_readers 0
- Status
That pretty much got rid of the rubber taste.
What model pen, as an example, works best for the 510? Also, I wonder if I can go to a drug store & ask for the droppers from the pharmacist? Any thoughts?
Very cool mod, I'll definitely give this a shot once my 510's arrive.
If anyone finds a place that has these disposable droppers readily available (besides a hospital), please let us know.
If anyone finds a place that has these disposable droppers readily available (besides a hospital), please let us know.
I just started using this mod and it works perfectly and couldn't get any simpler.
I had one thought I wanted to add. Has anyone tried using a dropper bottle tip instead of the pen tip? The ones I have at work with me are wider than normal ones and won't work to test with.
I had one thought I wanted to add. Has anyone tried using a dropper bottle tip instead of the pen tip? The ones I have at work with me are wider than normal ones and won't work to test with.
It took me about 30 seconds to make the simple mod. I hooked it up to my 5v 510 and it works like a champ. I'm actually getting more vapor with this mod than I did with a blank cart, and its a much easier draw.
Last edited:
I don't even stick anything in the rubber anymore. I just slip it on the atomizer, and tail pipe away on it.
I wonder how these cheap tips would work. The first and the third look promising.
Hookah Mouthpiece and Mouth Tips (10 pack) - Mouth Tips and Filters at Hookah-Shisha.com
Hookah Mouthpiece and Mouth Tips (10 pack) - Mouth Tips and Filters at Hookah-Shisha.com
Penstate fan I see.......... yea the rubber taste will come back everyday but only the first few inhales then you wont notice it.... but it works. This also gave me an idea that ive been working on using the small 3 ml bottles. I wish there were 1 - 2 ml bottles because I could implement this idea into a fully functional dripping cart. which would be sweet.
Last edited:
I haven't tried this on my 901 but it works great on my 510. Can't wait to see how this works while driving since that is the time that is hardest for me to vape (hard to drip on an hour drive in rush hour traffic in Houston).
That is what I have started doing. I kept getting hot liquid in my mouth but this works so much better.
can someone throw out a brand of pen that works for 510?
went to the store and there were a lot that looked like they would work. but i couldn't tell which ones had the screw off tips.
the few pens i found around my house and at work with rubber grips didn't seem to work that well.
went to the store and there were a lot that looked like they would work. but i couldn't tell which ones had the screw off tips.
the few pens i found around my house and at work with rubber grips didn't seem to work that well.
The pens I got turned out to have the grips glued onto the pen.
So I had to go medieval on them with pliers.
But they were a good size, so if you want them: Pilot G-2s
I tried this and am still getting juice in my mouth. I only added a couple of drops and am using the pen tip. I don't have any pipettes. I have no idea what the issue is.
Can't you just take the cart apart and remove the middle and use this. I just take the two caps off of the cart and drip directly onto the atomizer.
This is going to be a super dumb questions, but after you put the drops into this funnel like the picture below. You then just take it off and put an empty cartridge on for the mouth piece part right?
This is my first time reading on direct dripping.
[FONT="]
[/FONT]
This is my first time reading on direct dripping.
[FONT="]
Yep. Here's what I do with 510 and 901 carts:
1) Remove filler.
2) Shave a mm or so off the atomizer end, so no worries about melting.
3) Remove the inserts from the mouth end.
4) Cut or drill out the bottom of the reservoir. Make sure to get all the little plastic pieces, or shavings cleaned out. What you wind up with is a (mostly) empty tube without anything to obstruct the juice drops from falling directly onto the bridge. If you look through the mouth end, it will look something like this, depending on the style of cart:
It needs to be cleaned every now and then, but that's the only time it needs to be removed.
If you have problems with carts that don't fit your 901 very snugly, just get something like these Kobalt 8" long-nosed pliers from Lowe's:
Put the very end, just a mm or so, of the cart end of your 901 atomizer into that circular void by the cutting blades. Squeeze very gently until you see the tiniest bit of flex in the metal. You're not trying to make a visible change to the atomizer, here, just flex the metal a bit.
Now give the atty a 1/4 turn or so, and do it again.
Test.
Now my carts fit almost too tightly, but that's perfect for dripping. There is no visible sign that you have done anything to the atty.
Also, I have on of [these] on order from JC. I think they will make dripping even handier, since you won't have to mess around with screwing and unscrewing a bottle cap. Just whip this puppy out of your pocket, squeeze a drop into your atty, and vape!
You can if you want, but using the pen grip for a mouthpiece is really nice.
And besides, the point of this method is that you don't have to remove the mouthpiece to drip.
- Status
