DNA 200 Watt
- Thread starter MegaVap
- Start date
- th_trl_thread_readers 0
- Status
Are you running updated firmware? I'm not for sure it caused exactly the symptoms you described, but their was an issue on some of the earliest versions of the firmware with battery capacity different than the first evolv beta mod. But it was fixed by the July 9 firmware update, it may have been before that.
Like I said I don't know that it was those exact symptoms and I know it was resolved in a firmware update, so if you're on newer firmware that's not the same issue I had seen.
Also (you have probably done this, but worth mentioning on the tiny chance you didn't) you need to set the Watt Hours in Escribe.
I just set mine, that was certainly easy enough as it walks you through it.
For those not looking at the Evolv forum Brandon said earlier today:
Due to the new board dimensions and input power requirements, many of the vendors are having to totally redesign their mods. Remember, we had 3 generations of dimension-ally identical boards. Opus just happened to have a dual 18650 case that fit a lipo rather nicely, which allowed him to get to market sooner.
I suspect you'll see quite a few production mods hitting the market in the next 2 weeks.
I suspect you'll see quite a few production mods hitting the market in the next 2 weeks.
I'm having a hard time keeping myself from opening my Opus. I screwed in an SXK Magma clone on it an may have forced the 510's insulator down a tad, not sure but have a couple of atties that don't connect on this mod only.
Edit: Well the cover slides off after removing the screw. The 510's insulator was not screwed into the 510's body all the way, see picture, I don't believe now that it was pushed inward by the Magma's 510. They used silicone to keep it in place, I used a dab of Super Glue gel.
Looks better than the one Busardo showed, his must have been pre-production.
BTY... success
But just in case it will never see that Magma again.
That glob of stuff on the 510 is theirs..BTW
Edit: Well the cover slides off after removing the screw. The 510's insulator was not screwed into the 510's body all the way, see picture, I don't believe now that it was pushed inward by the Magma's 510. They used silicone to keep it in place, I used a dab of Super Glue gel.
Looks better than the one Busardo showed, his must have been pre-production.
BTY... success
But just in case it will never see that Magma again.
That glob of stuff on the 510 is theirs..BTW
Last edited:
Vapor Shark said they were going to announce the VS DNA200 at ECC (8/14).
The VS will come out the day after I finish building my mod.
I got a little impatient and ordered a bunch of parts over the weekend.
I got a little impatient and ordered a bunch of parts over the weekend.
I'm so in love with my 200 that I am already building my 2nd one. Greatest chip I have used to date. Great work Evolv!
Paul at Protovaper had this to say: We are working on something, stay tuned..
So I did a couple shots and a bowl...
So I did a couple shots and a bowl...
.06 ni200 zipper coil. Bought the coil from the same place i buy a bunch of exotic coils. Seen a few threads here saying that these types wont work and only use simple spaces coils. Haven't had an issue and been working great.
Sent from my LGLS990 using Tapatalk
Yes, I updated my Opus when I received it which was after July 9th. I've noticed that the battery percentage meter (which was the "problem") has been behaving a bit better lately, not sure why.
Dwcraig1: Could you please walk me through the watt hours adjustment?
Also, mrkaos where do you buy your coils from?
Any of you guys have definitions / explanations of the debug fields values that show up in device monitor after the seven clicks on the Help/About Escribe logo? I'm trying to understand and not making a lot of headway on my own.
Duane
Duane
Connect with escribe, mod tab, watt hour calculator. It will walk you through it. On mine the battery is 1000 mah so that was my input, it's too easy.
Enjoying the device, only with nickel for now to, waiting on my ti to get delivered.
Options are quit "overwelming" with how you can tune it to the build (wich is a good thing).
Gonna be fun to preset all those profiles, very easy to scroll trough menu to, need more dna 200s once there are more choices.
Options are quit "overwelming" with how you can tune it to the build (wich is a good thing).
Gonna be fun to preset all those profiles, very easy to scroll trough menu to, need more dna 200s once there are more choices.
Finished this mod a few days ago, just got around to taking a few pictures. Meet the lego200:
View media item 428680View media item 428681View media item 428682View media item 428683View media item 428684View media item 428685
Wiring inside is 12 gauge to the 510, 16 to the battery. The extra XT60 in there is between the dna200 and the 510, since I wanted things to be modular (this being lego and all). The 510 is from fasttech, basically a varitube clone. Battery is a Turnigy nano-tech 1000mah 3S 25~50C. Everything else is lego including the button actuators, chip holder, screen mount. No glue, only a small bit of double sided tape to hold the screen. The only cut into the lego was for the 510 (a hole for the threads, and a recess for the top plate.
The style plates attach onto the side. So far I've made the two seen in the pictures, but I will likely make a few more. And I need to find some mounts in black. The grey ones stand out when the plates are off (they are completely hidden when they are on though).
Been using it at about 50W mostly, 410F - 430F, preheat set to 200W 1sec. Vaping great. Now I just need to keep myself from ordering more dna200's.
View media item 428680View media item 428681View media item 428682View media item 428683View media item 428684View media item 428685
Wiring inside is 12 gauge to the 510, 16 to the battery. The extra XT60 in there is between the dna200 and the 510, since I wanted things to be modular (this being lego and all). The 510 is from fasttech, basically a varitube clone. Battery is a Turnigy nano-tech 1000mah 3S 25~50C. Everything else is lego including the button actuators, chip holder, screen mount. No glue, only a small bit of double sided tape to hold the screen. The only cut into the lego was for the 510 (a hole for the threads, and a recess for the top plate.
The style plates attach onto the side. So far I've made the two seen in the pictures, but I will likely make a few more. And I need to find some mounts in black. The grey ones stand out when the plates are off (they are completely hidden when they are on though).
Been using it at about 50W mostly, 410F - 430F, preheat set to 200W 1sec. Vaping great. Now I just need to keep myself from ordering more dna200's.
OMG!!! Best DNA200 device yet. NICE!!
Thanks dwcraig, just changed the watt hours adjustment.
Crazytwists on ebay. Just google. Ni200 zipper and he should show up. Tons of different types.
Sent from my LGLS990 using Tapatalk
Mat the rate evics are dying the oreorders wont even be fulfilledYep. That would do it.
Maybe when the evic gives up its ghost but by the time we'll have probably a dna 400 with a large capacitor with a 600W boost
Regards
Tony
Sent from my keyboard through my phone or something like that.
I just clicked order on an sx mini m class ajd im beginning to thhink maybe that was a bad move and i should just wait for the opus.
Would anyone recommend the m class is still the go to buy over the cirrent dna200 releases. Namesly the opus? Also i wonder how long the opus will take to get back in stock and what production issues may be present.
From orevious reqding the yihi chip seemed more accurate than the dna 40 and handled temo co trol differently but may oreferred it. I wonder id the 200 chip handkes it the same way as the 40
- Status
Similar threads
