Do you have multiple mods and tanks?
- Thread starter MoltoCraft
- Start date
- th_trl_thread_readers 0
- Status
OMG , thats a lot of Provari's lol, did you buy some of them after the big price drops ? Not being a "mega wattage " nut has it's perks , great prices on outstanding mods that don't suit a lot of the vapors nowadays .
Oops sorry , my New Years resolution was to pay attention more , working out as well as expected so far .
Yeah, speaking of back ups of my back ups, I need another back up soon as my MVP is finally showing some usage wear (Paint fading) after this first year of everyday use.
lol das alot of provari. thats a HERD of provari...
i hope to own 100 reos (or at-least 100 BF's, be them clones or not) one day.
i hope to own 100 reos (or at-least 100 BF's, be them clones or not) one day.
I've never paid full price, taxes, or shipping for any of the ProVari I have ... the last 8 were bought for @ $30 each
who wouldn't have multiple mods, if their favourite mod was on sale like this ...
Mostly mechanicals.
3X Super T Precise + each with a Prometey atomizer
2X Titanide Themis each with a Prometey atomizer
MicroStick with MicroDrip atomizer
I do have an Invader Mini 50W but don't use it much other than to clean coils.
Last edited:
My tendency is to only use what ever is my favorite and everything else sits on the sidelines so buying anything that might be less than my new favorite is not money well spent for me.
I've been buying PCs since the days of 8086 processors and dual 360K floppiies. From that I learned to be patient before upgrading. I'm trying to be the same with vape gear but threats of government interference have me buying a few things I wouldn't otherwise, first and foremost 3 liters of 100mg nic for the freezer, a 10 year supply for me. Atomizers are easy. I use rda's exclusively and they are dirt cheap from Fasttech. Fasttech also sells size runs of rubber o-rings and recently all the tiny screws and grub screws commonly used, also dirt cheap.
I've made it 5 months on a single TC mod (see below) which works fine but I'd like to put it on permanent backup for a few reasons (I'll miss the flashlight function). So I have an Evic TC mini and a Cuboid on order. After that I may get a couple more TC mods for stockpiling purposes and then, depending on our dear government, only buy when there are significant advances in the technology. It's hard to calculate a 10 year supply of TC mods. May be any one of them would go 10 years of full time use. I'll set a couple aside in like new condition and only test them a couple times a year. A manufacturer might get an edge by offering some mods with specific engineering for long service life in case of supply interruptions. I'd be interested in that.
I've been buying PCs since the days of 8086 processors and dual 360K floppiies. From that I learned to be patient before upgrading. I'm trying to be the same with vape gear but threats of government interference have me buying a few things I wouldn't otherwise, first and foremost 3 liters of 100mg nic for the freezer, a 10 year supply for me. Atomizers are easy. I use rda's exclusively and they are dirt cheap from Fasttech. Fasttech also sells size runs of rubber o-rings and recently all the tiny screws and grub screws commonly used, also dirt cheap.
I've made it 5 months on a single TC mod (see below) which works fine but I'd like to put it on permanent backup for a few reasons (I'll miss the flashlight function). So I have an Evic TC mini and a Cuboid on order. After that I may get a couple more TC mods for stockpiling purposes and then, depending on our dear government, only buy when there are significant advances in the technology. It's hard to calculate a 10 year supply of TC mods. May be any one of them would go 10 years of full time use. I'll set a couple aside in like new condition and only test them a couple times a year. A manufacturer might get an edge by offering some mods with specific engineering for long service life in case of supply interruptions. I'd be interested in that.
I currently have 14 mods in use every day. My 15th mod will be a Reos P67 when it goes up for sale. Not a large number compared to some, but I do like variety.
Mechanicals: Reos Grands(4), Poldiacs(2), SupetT Workhorses(2), Gizmo(1), Silver Bullet-M(1)
VV/VW: Provari(4), the only VV/VW I'll buy.
For the toppers, I have KFL's, Kanger STM's, Erlk's, several drippers, cartos/tanks, and RM2 bf atties.
All of the above, is what it's boiled down to over the years, and they just work for me.
Mechanicals: Reos Grands(4), Poldiacs(2), SupetT Workhorses(2), Gizmo(1), Silver Bullet-M(1)
VV/VW: Provari(4), the only VV/VW I'll buy.
For the toppers, I have KFL's, Kanger STM's, Erlk's, several drippers, cartos/tanks, and RM2 bf atties.
All of the above, is what it's boiled down to over the years, and they just work for me.
Last edited:
I have no use for mods that I can't fix myself. In the case of regulated mods, that means being able to stock spare circuit boards. But lately, I find myself vaping my mechanicals as much or more than my regulated mods. About a month ago, the board in one of my regulated mods failed and I haven't bothered to replace it despite having plenty of spare boards on hand. Go figure.
I'm interested in being able to service mods and atomizers. One thought I had was finding sources for parts where I could build mods with parts that are servicable and replacable or may be most of the mods already on the market can be serviced with generic parts? Can you post some links to where you get your replacement parts?
Personally I'd like to have a decent mod to go with every atty I own. But seeing as I own way too many atties that'd cost me too much money.
I have 4 primary mods I use on a regular basis: a Dimitri parallel box mod with my twisted messes atty on top, Limitless mod with my Momster v3, Rolo DNA 200 with a Kennedy 24 and a Sigelei 50w vr2 with an Atlantis 2 on top.
I also have an authentic AV peg/buster prototype, AR 1.5, & a sigelei 100 which barely see any use anymore. I'll probably start using my AV mod again once my Vector comes in today.
Edit: I also have a Provari mini 2.5 with the 18490/18500 battery cap & an IPV mini 30w, but I stopped using them a long time ago. The IPV didn't read ohms correctly even after resolding thicker wires to the board/battery/510.
I have 4 primary mods I use on a regular basis: a Dimitri parallel box mod with my twisted messes atty on top, Limitless mod with my Momster v3, Rolo DNA 200 with a Kennedy 24 and a Sigelei 50w vr2 with an Atlantis 2 on top.
I also have an authentic AV peg/buster prototype, AR 1.5, & a sigelei 100 which barely see any use anymore. I'll probably start using my AV mod again once my Vector comes in today.
Edit: I also have a Provari mini 2.5 with the 18490/18500 battery cap & an IPV mini 30w, but I stopped using them a long time ago. The IPV didn't read ohms correctly even after resolding thicker wires to the board/battery/510.
I have my travel mod for when I am on the go and I have a mod for work.I work at an auto repair shop so its about as rough an environment as there is for anything electronic.Then I have my cadillac(ipv3li)that never leaves the house.I treated myself to it for my 1 year of no smoking and christmas...so 3 mods for 3 different purposes.My 3li is never going anywhere near my job
I'm not that familiar with the gear you're using or parts availability for it.
The first mod (as opposed to stick battery) I ever bought two years ago had a DNA20 in it. That was state of the art at the time -- my how far we've come! Every regulated mod I've acquired or built since then has had an Evolv DNA in it. I've got a drawer full of DNA30 and DNA40 boards as spares. I have a bag full of Fat Daddy classic 510 inserts and vented screws to use as center-pins (I'm all bottom-fed, all the time). As far as atties, there's really not much to fail on an RDA except O-rings and clamp screws. I'm not worried about the FDA closing places like The O-Ring Store or McMaster-Carr.
I do have more than one, recently I finally found what I like, sold all my other stuff and consolidated my collection to just a few types, makes it nice and comfortable.
I'm down to:
- 6 Dicodes devices (2 dani extreme, 2 dani extreme v2+, 2 dani boxes)
- 4 Xvostick (3 are clones)
- 2 heatvape invaders for when it rains
and
- 1 sx mini m as backup
For tanks I now just have 7 Kabuki's and for RTA's 8 goblin mini's.
I hope this will get me through the vapocalypse (one of te reasons I moved to higher quality items like Dicodes, they need to last). Might just need a few more goblins and I'm done LOL
I'm down to:
- 6 Dicodes devices (2 dani extreme, 2 dani extreme v2+, 2 dani boxes)
- 4 Xvostick (3 are clones)
- 2 heatvape invaders for when it rains
and
- 1 sx mini m as backup
For tanks I now just have 7 Kabuki's and for RTA's 8 goblin mini's.
I hope this will get me through the vapocalypse (one of te reasons I moved to higher quality items like Dicodes, they need to last). Might just need a few more goblins and I'm done LOL
- Status
Similar threads
- Locked
- Locked
