Does anyone use smoke tech flanged single coils with one prepunched hole?

Status
Not open for further replies.

Dana A

Ultra Member
ECF Veteran
Verified Member
Feb 25, 2012
2,778
1,292
48
Iowa
I want to try these in my smoke tech tank with my Provari. I have only used 3 ohm with 3 holes and they never flood or fail to feed enough juice. I cant seem to find any with 3 pre punched holes and I am afraid only one hole will give me feeding problems. I use no more than 35% VG. Has anyone used these at 2 ohms with one hole and if so do you have any trouble with it feeding? Thanks in advance.
 

Bohab13

Full Member
May 29, 2011
57
14
California,USA
Hey Dana, I've been using the 1.7 ohm single coils. They work fine with 100% PG, but for the 30% VG I've started using, I use a 1-1/2" finishing nail to increase the diameter of the hole. I can't remember who originally posted about using the finishing nails, but it's been working perfectly for me. If that sounds like too much hassle, Madvapes carries exactly what you're looking for. Tank Replacement Single Coil Cartomizers, 2.0 ohms
 

Freddie

Super Member
ECF Veteran
Verified Member
Mar 19, 2012
809
530
The NETWORK
I want to try these in my smoke tech tank with my Provari. I have only used 3 ohm with 3 holes and they never flood or fail to feed enough juice. I cant seem to find any with 3 pre punched holes and I am afraid only one hole will give me feeding problems. I use no more than 35% VG. Has anyone used these at 2 ohms with one hole and if so do you have any trouble with it feeding? Thanks in advance.
Hi Dana! If you go to elitevaporworks.com they have the 3 hole pre-punched flanged cartos in 3.0 ohms!

BTW...They have FREE shipping on EVERYTHING! :D
 
Last edited:

cixelsyd

Full Member
Verified Member
Apr 30, 2012
25
2
Oregon
I've used the dualcoil models and had issues with wicking up to the second coil, so I cut it and converted them back into single coils, which have worked perfectly up until I got my Genesis, at which point I don't use them anymore :) I never got a chance to try the 3 hole models, though I have a couple, maybe I'll dig one out and play with it.
 

heliguy

Senior Member
ECF Veteran
Verified Member
Jun 1, 2011
225
123
chicago
I just got a 3.5ml tank and am using the 3 hole dual coil.

They seem to be burning very fast!!!!

Im also wondering if they are not wicking to the top coil. I havent tried the single coils yet. I was worried about there being only 1 hole and I use VG liquid. Good to know they have single coils with 3 holes. As soon as they are in stock at madvapes Im going to order some.

I might try and open the holes a little more on the few dual coils I have left.
 
Status
Not open for further replies.

Users who are viewing this thread