The Peko is fab, Mark! Hope your back calms down, quickly. You take care of you!
Dready's Mod Spa: Gallery, Info, & Chit Chat
- Thread starter Mark Howard
- Start date
- th_trl_thread_readers 0
- Status
Finally starting to get back on my feet and work. 
working on a few, fancy custom orders; but also starting to finish up a big project I started working on a long time ago. So eager to unveil it to you all, but am decided to wait until it is totally finished before uttering another word. Those of you with custom orders in, don't worry, this project is always on the back burner when there's things I can work on with your mods.
Stay tuned! I'm really excited for this...
working on a few, fancy custom orders; but also starting to finish up a big project I started working on a long time ago. So eager to unveil it to you all, but am decided to wait until it is totally finished before uttering another word. Those of you with custom orders in, don't worry, this project is always on the back burner when there's things I can work on with your mods. Stay tuned! I'm really excited for this...
Alright... Finally! My little project is finished and ready to go
I'll be announcing the details in the next day or so, but I'm thinking I will release it to the site some time Friday. Reason being I don't think I'll have a chance to ship until Saturday morning. I'm really excited about this. Been working on it (on & off) for several months. Thinking it will be a one time thing, but enough for now. Stay tuned, as I said it's ready to go so I foresee no holdups in launching
I'll be announcing the details in the next day or so, but I'm thinking I will release it to the site some time Friday. Reason being I don't think I'll have a chance to ship until Saturday morning. I'm really excited about this. Been working on it (on & off) for several months. Thinking it will be a one time thing, but enough for now. Stay tuned, as I said it's ready to go so I foresee no holdups in launching
Yes. I'll put a detailed post together, here, before letting the links go live. And I am going to give it a day or so after that before I plug it anywhere else. The customers I, and a couple other small vendors here, have through ecf have been the best, most loyal I have seen. Ecf people always get first dibs with me
^^ wasn't trying to be mysterious about it, but this morning it reads that way to me. It was already quite late, I was tired, and I have a bit of content I want to put into the announce post so I wasn't up for it at the time. But also I was so excited to finally get to this point I guess I felt the need to say something.
I'm planning on putting the announce post together some time today. Hopefully my son naps this afternoon and I can do it then. Just going to need a little bit of time in front of my real computer, not my phone.
I'm planning on putting the announce post together some time today. Hopefully my son naps this afternoon and I can do it then. Just going to need a little bit of time in front of my real computer, not my phone.
So here we are. This is the project I have been working, on and off, for the past several months. I wanted to create something entirely on my own that was different than anything else available. There is a mix of copper and nickel patinas as well as plenty of inked aluminum.
Each of these is entirely hand made; I have no machines or machining skills, so they are all cut, shaped, and finished with basic jeweler's tools. Took quite a bit longer than I would have expected, so this may very likely be a one time deal. The edges are beveled to make a friction fit without the need for magnets. Each squonk hole is a "D", for Dready, and it can be easily seen that they are hand done. These are not perfect, each is a little different. I look at it as a uniqueness that further gives each its own character.
Doors are finished with a durable clear coat to protect the finish. To clean and maintain, we recommend using a Sunshine brand polishing cloth or other microfiber cloths that will not leave scratch marks on the high gloss finish. Water may be used additionally, but use of chemical cleaners is not recommended.
There are 30 that will be available right away. I do have 2 more copper and 2 nickel that I will be redoing and adding to the collection as soon as possible. But that will likely be it. I will have these live and available for purchase tomorrow (Friday) morning at 8am MST. I highly doubt anything will ship until Saturday, but the plus of these all being complete is that I will be able to ship same or next day
I hope you like them. Without further adieu:
Each of these is entirely hand made; I have no machines or machining skills, so they are all cut, shaped, and finished with basic jeweler's tools. Took quite a bit longer than I would have expected, so this may very likely be a one time deal. The edges are beveled to make a friction fit without the need for magnets. Each squonk hole is a "D", for Dready, and it can be easily seen that they are hand done. These are not perfect, each is a little different. I look at it as a uniqueness that further gives each its own character.
Doors are finished with a durable clear coat to protect the finish. To clean and maintain, we recommend using a Sunshine brand polishing cloth or other microfiber cloths that will not leave scratch marks on the high gloss finish. Water may be used additionally, but use of chemical cleaners is not recommended.
There are 30 that will be available right away. I do have 2 more copper and 2 nickel that I will be redoing and adding to the collection as soon as possible. But that will likely be it. I will have these live and available for purchase tomorrow (Friday) morning at 8am MST. I highly doubt anything will ship until Saturday, but the plus of these all being complete is that I will be able to ship same or next day
I hope you like them. Without further adieu:
Last edited:
I sure hope people are still using Reos. Things move so fast now in the vape world it's hard to keep up. Started this months ago...
It's the only device I use; all day every day. Don't get me wrong, I'd love a CC if I could afford it.
Yep. Products will be live at 8am MDT tomorrow (I think that's 10am your time Peng). Wanted to give early notice here so people get a chance to find out before they're gone. Or at least the one they wanted; doubt they'll all go that quickly
So here we are. This is the project I have been working, on and off, for the past several months. I wanted to create something entirely on my own that was different than anything else available. There is a mix of copper and nickel patinas as well as plenty of inked aluminum.
Each of these is entirely hand made; I have no machines or machining skills, so they are all cut, shaped, and finished with basic jeweler's tools. Took quite a bit longer than I would have expected, so this may very likely be a one time deal. The edges are beveled to make a friction fit without the need for magnets. Each squonk hole is a "D", for Dready, and it can be easily seen that they are hand done. These are not perfect, each is a little different. I look at it as a uniqueness that further gives each its own character.
Doors are finished with a durable clear coat to protect the finish. To clean and maintain, we recommend using a Sunshine brand polishing cloth or other microfiber cloths that will not leave scratch marks on the high gloss finish. Water may be used additionally, but use of chemical cleaners is not recommended.
There are 30 that will be available right away. I do have 2 more copper and 2 nickel that I will be redoing and adding to the collection as soon as possible. But that will likely be it. I will have these live and available for purchase tomorrow (Friday) morning at 8am MST. I highly doubt anything will ship until Saturday, but the plus of these all being complete is that I will be able to ship same or next day
I hope you like them. Without further adieu:
oh my, REO owners get on that. And to think you said painting wasn't your thing in art school
Yep. Products will be live at 8am MDT tomorrow (I think that's 10am your time Peng). Wanted to give early notice here so people get a chance to find out before they're gone. Or at least the one they wanted; doubt they'll all go that quickly
I know what I'll be doing at 8AM MDT.
If I had a run of doors made in a metal of your choice for my upcoming mod would you be interested in doing them? I think it would be awesome to mix the old with the new so to speak.
- Status
