Dream or Igo-L Which do you prefer and who on earth has them is stock?

[calpis]

Yeah and they cost $25.

They're $17 at vaporbank.

If you don't care for the extra precoiled wicks and the extra set of pins, DV has an option for a single wick Dream tank setup for $19.99. He also has a coupon code on top of that, that will knock off $7 off that price. The BT804 coupon code is basically the model name/number and will work on any of the Dream tanks he sells. It doesn't quite bring it down all the way to Vaporbank's price on the full set though (+$1).

 

[Randy C]

I have a Dream, which is nice, but not spectacular by any means. I have both an IGO-S and an IGO-L on order, so I should be able to do a side by side by side comparison by next week sometime.

I'd like to see the side by side comparison Mitey F. My Igo-S's arrived... I haven't tried them yet, but they are teeny tiny! I looked at the specs and they appear to be just about the same height as the "L", just a lot narrower and come with holes in the posts. The cap fit is what I would consider normal; not too loose/tight. I know these will work on my Reo (not as a bottom feeder of course).

 

[Faylool]

I'll certainly be checking back about your experiences with igo s. I'm newbie and mine is on its way. I pretty much copy somebody still. Mine comes with wire. I hope they indicate it's size!

 

[fanatic205]

I am not impressed at all with the dream, the spring under the white plastic center peice kept getting hot and well wasnt so springy. I fixed it with a solid peice of brass, but after two uses i shouldnt have to modify a new rba

 

[Jeremy Evans]

so with these and similiar ones, you just dump the juice down the top or what? I want to get something like this just to try flavors in rather than filling something to use it only to not like the flavor. But want a little guidance on how to use. Thanks and also what do you think would be better this or like a Octupus RDA or Smoktech RDA?

 

[Faylool]

Hi Jeremy. I think they are really in to the igo L and igo S one is smaller, ( the s). But I don't know about the 2 you mentioned. I myself went with the igo s but the igo L might be easier to work with.

 

[WinchellNomNom]

I use a smoktech rda to taste test. Super easy to build throw away coils. Only for taste testing purposes though.

2 gripes I have with the rda is its ugly(opinion), it doesnt come in a stainless version, and that bottom air hole is annoying. I drilled a side hole and plugged the bottom hole with mesh.

 

[Randy C]

I just picked up two Igo-L's from My Vape Store! I swear that they didnt have them yesterday. I'm really thrilled at the number of new RBA's hitting the market. So many of them are small, made of stainless steel, and most are very affordable! I'm glad to see that so many of these are coming with spare parts kits too! I think I'll be good for a while... I've got two new A-7's two Igo-S's, and now two Igo-L's

 

[Faylool]

I got a a A7 mini keeping in mind I'm not good with, in fact I'm bad with this kind of stuff but from my research and eyes open looking I followed the crowd. I am usually a non crowd following kind of person too!

 

[WinchellNomNom]

Turn those a7's into mini spheroids. You wont regret it. A7oids

 

[Mitey F]

After receiving the IGO-L and S (which I haven't set up yet) I'm very impressed with the L as compared to the dream. In fact, I don't see my dream getting any use anymore, besides perhaps the occasional test run of a new coil/wick setup.

 

[Faylool]

Turn those a7's into mini spheroids. You wont regret it. A7oids

Oh yeah? How do you do that? Filling or? I got a a7 mini

 

[WinchellNomNom]

You can buy a a7-oid drip tip from captivape.com. It is an excellent product and comes with enough sera filler for 10-15 rebuilds for 9 bucks.

You can also make your own by joining a delrin drip tip with a kanger t3 center pole. Convienient if you have those laying around. Do a search on youtube for toddoid and todd has a good walkthrough you can view.

Performance is on par with the spheroid, but capacity is only 2-2.5ml with the a7-oid. Price (a7+a7oid) is 15% of a spheroid.

 

[Nicblazer]

Oh yeah? How do you do that? Filling or? I got a a7 mini

Here, Fay : https://captivape.com/index.php?products&a=view_product&product_id=77


Now, Fay, if you have more money to spare go out and buy yourself a full sized A7 to use with this. It should be obvious that your juice capacity on a mini A7 with this conversion will be extremely low, and probably not worth the trouble.


I still have a modded trip tip A7-oid that I traded with a good peep here on ECF (Urq, thanks again), and I can attest that these little things work like a charm. Be ready for flavor to exponential levels .


Take care, Fay.


Nic

 

[Nicblazer]

?.. It is an excellent product and comes with enough sera filler for 10-15 rebuilds for 9 bucks...

Word of warning, lol. I ended up buying the 500g of sera filler wool on amazon, and now I have enough wool to make me a personalized pillow. Don't make the same mistake

 

[Jerms]

After receiving the IGO-L and S (which I haven't set up yet) I'm very impressed with the L as compared to the dream. In fact, I don't see my dream getting any use anymore, besides perhaps the occasional test run of a new coil/wick setup.

I ordered the IGO-S today along with the Smoktech RDA, so my Dream Fatty clone may see an early retirement too. Today I put an o-ring on to raise the cap a little when screwed on so the air-holes are a little higher off the base. Works better, and I can adjust a little the placement of the air-holes while keeping the cap tight.

Sent from my LGL55C using Tapatalk 2

 

[adeline]

Word of warning, lol. I ended up buying the 500g of sera filler wool on amazon, and now I have enough wool to make me a personalized pillow. Don't make the same mistake

I have 250g AND 500g.

I win the ridiculous award.

It doesn't sound like a lot, but take it from me ... Seriously, 100g should do you JUST FINE.