Drip Tips...
- Thread starter PapawBrett
- Start date
- th_trl_thread_readers 0
- Status
These are my favorites... I also have a couple of black ones...
Acrylic -- never hot or cold;
small Ming -- best flavor of any, and the small ones don't look goofy sticking out of those angled adapters.
The angled adapter is another essential since I vape exclusively with RDAs nowadays; nearly always on my Achilles, but occasionally with my Magma. I've never used an RDA and not gotten hot ejuice spit at me; the heat is bad enough, but having ejuice in my mouth, just eeeuuuwwww. Having the angled adapter (or a knucklehead, which I also use) keeps my mouth offset from the coil, so I don't get ejuice spit at me. The spitback never happened with Kayfuns, maybe because of the chimney, but it ALWAYS happens with RDAs, unless I use either the angled adapter or a knucklehead tip.
Andria
Acrylic -- never hot or cold;
small Ming -- best flavor of any, and the small ones don't look goofy sticking out of those angled adapters.
The angled adapter is another essential since I vape exclusively with RDAs nowadays; nearly always on my Achilles, but occasionally with my Magma. I've never used an RDA and not gotten hot ejuice spit at me; the heat is bad enough, but having ejuice in my mouth, just eeeuuuwwww. Having the angled adapter (or a knucklehead, which I also use) keeps my mouth offset from the coil, so I don't get ejuice spit at me. The spitback never happened with Kayfuns, maybe because of the chimney, but it ALWAYS happens with RDAs, unless I use either the angled adapter or a knucklehead tip.
Andria
All of yours are great Boden!
What is the material? And are they "press fit" or is there a groove/o-ring?
What is the material? And are they "press fit" or is there a groove/o-ring?
If you prefer a basic delrin DT SOV has theirs on sale for 8 bucks each shipped, I picked up a couple…great quality with dual orings.
Drip tips Archives - Science of Vaping
Drip tips Archives - Science of Vaping
It's gotta be wide bore for me. Plastic or metal doesn't really matter if it's for my nauti's. It's gotta be acrylic for my subtanks though since they don't get as hot. But oddly enough, the drip tip I've got with the subtank now is metal with an acrylic coating, still doesn't get as hot.
My 3 favorite so far. I have a few press fit ones coming in the mail I plan on modding. I hate metal in my mouth 
most of the drip tips I use came with my vivi nova and DCCT tanks lol. black plastic delrin. simple. free w/ purchase. I do have a blue with white swirl vase, a green and white ming, a black aluminum super shorty, 2 or 3 black mings, the clear ones (n black ones) that came on tanks, a HUGE stainless steel ming that came on my AGA-T genny lol, I have a nice SS/delrin one, stainless on top and bottom, with a white w/black swirl delrin bead in the middle, which is my current favorite... andddd, i think that's basically it... wish I could be more into them. Sound like a broken record on here with everything I "Wish" I could own. blah blah blah. I'm happy with any drip tip that my lips can hold on-to without juice spitting into my mouth, yknow? screw it. I've had them break, I've had em drop n crack. F it. I'll stick to cheap n free until i hit that lotteryyyyyy
Sound like a broken record on here with everything I "Wish" I could own. blah blah blah. I'm happy with any drip tip that my lips can hold on-to without juice spitting into my mouth, yknow? screw it. I've had them break, I've had em drop n crack. F it. I'll stick to cheap n free until i hit that lotteryyyyyy
sweet.... but I don't think I can afford a Lathe just for drip tips
What do you mean?? My Sherline Mill and Lathe setup only cost ~$3,000.sweet.... but I don't think I can afford a Lathe just for drip tips
Now my other lathe... :-0
I use them for my buisness.
I was wrong, cut/ paste can be done. Just makes large pictures.
Will soon find a new home with these ;
Time to stalk the Mail Lady
if I sent you dimensions could you spin me a simple tip? just a simple straight tube, slight taper at the top, 10mm through the center about 3/4 inch long? Its for my Aromamizer. the way they designed the topcap the drip tip opening is about 3 mm above the top of the deck.. Here it is with the drip tip popped up a bit so you can see what Im talking about... Looking for it to fit OUTSIDE the existing tube.
You'd think by now I'd know better than to go into a drip trip thread...sigh. Three more on the way. 
You'd think by now I'd know better than to go into a drip trip thread...sigh. Three more on the way.
Heh heh... I can totally relate. Imagine my delight to know that my favorites are those cheap acrylic Mings.
Andria
That is really, REALLY beautiful... like mother of pearl. Is it acrylic? I'd give a lot to find a small Ming made out of that beautiful material.
Andria
- Status
Similar threads
- Locked
