Dripping Experiment

[smokingalternative]

Hi all,
I have been a esmoker for about 3 months and use the njoy product line with liquid from e-cig.com. I was perusing these forums today and saw a interesting experiment and it prompted me to try one of my own.

It started with the concept of making a drip mechanism for drip smoking kind of like one seen on this forums, but easier. I am in no way mechanically inclined, so I hope to spark an idea that can be perfected by the community.

I remembered seeing, at the bottom of one of the white cartridges, a tanslucent plastic type of membrane. I looked in the bottom of a few of my cartridges and found one.

It so happens this membrane is engineered to fit perfectly over the cartridge open end.

So I figured if I could put liquid in the cartridge, without the stuffing, and make a small hole that I could drip from a large vessel.

I used a syringe to extract some liquid and make 4 holes in the membrane, placed the membrane over the end and then put the cartridge (very carefully) into the e-cig atomizer chamber.

To my delight, I have been using it all day do far. This is with only 3 drops of liquid.

Now if someone can help come up with a way to keep the membrane in place when taking it in and out of the atomizer chamber it would be perfect.

Looking forward to hearing thoughts on this,

 

[woody]

Let's hope all the manufacturers are reading these posts and are working on perfecting their designs!

 

[NerdyCinderella]

Hi all,
I have been a esmoker for about 3 months and use the njoy product line with liquid from e-cig.com. I was perusing these forums today and saw a interesting experiment and it prompted me to try one of my own.

It started with the concept of making a drip mechanism for drip smoking kind of like one seen on this forums, but easier. I am in no way mechanically inclined, so I hope to spark an idea that can be perfected by the community.

I remembered seeing, at the bottom of one of the white cartridges, a tanslucent plastic type of membrane. I looked in the bottom of a few of my cartridges and found one.

It so happens this membrane is engineered to fit perfectly over the cartridge open end.

So I figured if I could put liquid in the cartridge, without the stuffing, and make a small hole that I could drip from a large vessel.

I used a syringe to extract some liquid and make 4 holes in the membrane, placed the membrane over the end and then put the cartridge (very carefully) into the e-cig atomizer chamber.

To my delight, I have been using it all day do far. This is with only 3 drops of liquid.

Now if someone can help come up with a way to keep the membrane in place when taking it in and out of the atomizer chamber it would be perfect.

Looking forward to hearing thoughts on this,

This is an old question but just reading it.
How about using a little crazy glue to keep the little membrane on permanently and then use a tiny needle to inject fresh liquid into the cartridge?

 

[jamie]

Not sure if I understand this.

You have some liquid extracted from your carts.

You take the clear membrane and pop it on the open end of a cart like a hat.

You use the syringe to poke 4 holes in the top of the membrane.

You drip 3 or 4 drops of liquid into the cartridge via the poked holes.

You insert the cartridge into the atomizer as usual, except it is wearing a membrane hat.

Is that correct?

 

[TropicalBob]

That's the way I understood it, Jamie, but I've never tried it. I remember Dr. Loi said to shake the e-cig forward, exactly the way you would a failing ballpoint pen that was running out of ink. The shaking will send a drop of fluid to the atomizer.