Dripping Question & Supplier

[onename]

OK, so now I'm hooked on dripping, using the Cisco 510 LR right now but looking to find a supplier who has these or any recommendations on another good drip atty setup please.

Links would be great too...

TIA

 

[Concat]

306 atties are popular for drippers

 

[Mindfield]

I'm also told 901s are popular for the flavour they put out. I haven't tried them yet but I should have some coming next week for review (along with a 306 LR), so I'm going to put 'em all to the test in a showdown against the bridgeless 510 and a standard 510. A drip-off, if you will.

 

[Mr.Whitecloud]

I took the filler out of Kanger h coils and use them as atties after the filler has passed its prime they work well for dripping saves money too

 

[ChellyNelly]

I'm also told 901s are popular for the flavour they put out. I haven't tried them yet but I should have some coming next week for review (along with a 306 LR), so I'm going to put 'em all to the test in a showdown against the bridgeless 510 and a standard 510. A drip-off, if you will.

Really looking forward to this!

I've found that I don't get as much vapor or flavour that others boast about... at all. I don't know if I'm just the realist here or if I'm actually missing out on something.

 

[kellyd]

Get the bridgeless 510 atomizer from canvape its a stoppers dream you won't be disappointed there great

 

[kellyd]

Ddrippers dream

 

[DevilFishPhil]

I've been a dripper pretty much since I've started vaping and so far my all time favorite atomizer is the Cisco LR510. Here in Canada you can get them at HappyVaper, although the price is a bit steep compared to AvidVaper.com ($12.99 vs. $8.99 and roughly the same cost to ship).

The bridgeless atomizer from Canvape is decent, but unfortunately it's 2.0ohm and if you're dripping on a 3.7V device it might not cut it (at least not for me)

My recommendation would be to try the Cisco line of 510 bridgeless atomizers, and even the 306 to see if you like it - I'm personally not a fan mostly because of the drip tips..

 

[gnc207]

There is only one bridgeless 2 ohms on Canvape, you can’t miss it on the site.
And it serves me well on Lava up to 4.7 and Ego VV (the best for me on minimum v).

Cisco LR from HV are also good, but I prefer bridgeless for %100 VG.

And yes, must try a few different drip tips.

 

[vise]

Definitely a 306 atty is the way to go imo. I tried them once and never looked at another except the bridgeless on my vv. But my Stealth doesn't see anything other than a 306.

 

[ChellyNelly]

I've tried the 306LR from Canvape, both with the bridge and then I de-briged and de-wicked it. I don't find it that great.... I get just as good vapor in a Boge LR carto or with my tanks. I must be missing something????

 

[DevilFishPhil]

For all the 306 drippers - how in god's name do you manage to drip through that DT without getting juice on the walls of the DT and then subsequently not having it spit back up?

 

[cactusgirl]

My recommendation would be to try the Cisco line of 510 bridgeless atomizers, and even the 306 to see if you like it - I'm personally not a fan mostly because of the drip tips..

Hey Phil, there is an easy fix to the 306 drip tips...get a cherry vapes Universal drip tip (fits both the 510 AND the 306..these drip tips are 'stackable' and fit together with 510 drip tips....this means that when used in configuration with a 306 atty, you can place a regular 510 drip tip on the end of it!)

 

[cactusgirl]

I've tried the 306LR from Canvape, both with the bridge and then I de-briged and de-wicked it. I don't find it that great.... I get just as good vapor in a Boge LR carto or with my tanks. I must be missing something????

I prefer the 306 dripping atties from smartvapes...lots of flavour!!!

 

[cactusgirl]

For all the 306 drippers - how in god's name do you manage to drip through that DT without getting juice on the walls of the DT and then subsequently not having it spit back up?

Hmmmm, maybe I'm just lucky but I've never had that problem?!

 

[sam.8]

I find the traditional 306 tips do seem to catch the liquid in the tip. I just blow slightly before hitting the button and inhaling. Or as CG said, the connector is handy as well. What I do like about the 306 atty and tip is the size. Makes for a very tiny pocket vape on a 650 batt. Great for work

 

[siupes]

another vote for cherry vapes universal drip tip

 

[Dad2daBone]

I've been a dripper pretty much since I've started vaping and so far my all time favorite atomizer is the Cisco LR510. Here in Canada you can get them at HappyVaper, although the price is a bit steep compared to AvidVaper.com ($12.99 vs. $8.99 and roughly the same cost to ship).

The bridgeless atomizer from Canvape is decent, but unfortunately it's 2.0ohm and if you're dripping on a 3.7V device it might not cut it (at least not for me)

My recommendation would be to try the Cisco line of 510 bridgeless atomizers, and even the 306 to see if you like it - I'm personally not a fan mostly because of the drip tips..

Are there any Canadian suppliers for the bridge less version?

 

[zer0ith]

306 on a Reo = awesome sauce.

Also the universal DT makes it so much easier for dripping

 

[Ignitor]

The Ikenvape io6 is another great atty for dripping and seem to go forever