Dropped mvp 2 now it won't read the iclear30

[Mike Marino]

I was charging my mvp 2 and it fell right on its mouth piece. It reads 00 for the atomizer. Do you guys know if I can fix it or should I just wait for my other tanks to come. I just bought a whole new mvp 2 2 I clear 30s and a kanger pro 2 . I'm having them rushed delivered. I just rather not smoke regular cigs tommrow. I am not martyr. I'd rather not though.

 

[DetraMental]

Does it read any other clearo/carto/atty/tank you put on it? If yes, then it could be the pin got knocked outta kilter and needs to be gently manipulated with a paperclip, toothpick, or small jewelers flathead screwdriver. If no, still try manipulating the center pin gently. Let us know what happens.

 

[Mike Marino]

Where is the pin? I don't see anything thanks

 

[DetraMental]

The pin is down inside the 510 connection where you screw the clearo/carto/atty's/etc.....on

 

[Mike Marino]

When I stick a tooth pick through the little whole near the atty it reads 1.9 but won't fire up

 

[Mike Marino]

I just don't see wires at all in there. Is it just in the i30?

 

[Mike Marino]

What does it mean if the mvp stays lit green and doesn't vape? Could I've blow like a fuse in the I clear. I know it sounds dumb but I don't get how it works

 

[pappasmurfsharem]

He means the center circle like in the picture of my device here the actual positive connection for the bottom of your iclear

You want to try to slightly nudge the small flat inner circle up a bit.

When it fell it probably pushed the connection there down so it's not touching your atomizer

Sent from my iPhone using Tapatalk

 

[Mike Marino]

 

[WarHawk-AVG]

Do you have another clearomizer you can put on there to see if it reads it?

Do you have a multimeter to check resistance on the iClear 30 w/o using the MVP2?

 

[Mike Marino]

me and her are having withdrawals lol

 

[jefsview]

What does it mean if the mvp stays lit green and doesn't vape? Could I've blow like a fuse in the I clear. I know it sounds dumb but I don't get how it works

That means there is a short in the atomizer. It's the built-in protection kicking in.

Is your 510 connection loose at all? Was the iclear attached when it fell?

 

[devauto]

That means there is a short in the atomizer. It's the built-in protection kicking in.

Is your 510 connection loose at all? Was the iclear attached when it fell?

I made an assumption from the original post that it was attached. The MVP 2 doesn't have a built in "mouthpiece"

I was charging my mvp 2 and it fell right on its mouth piece.

 

[pappasmurfsharem]

View attachment 272980 me and her are having withdrawals lol

Have you tried adjusting the center pin on the itaste directly


Sent from my iPhone using Tapatalk

 

[DasBluCig]

Completely off-topic.....
But....LOVE your Pug!! Looking to adopt one as I speak!!
As others have said.......try working the center pin of the MVP's 510 connector UP a bit...
it probably got pushed down in the fall....
Good Luck!

 

[FringeChief68]

My MVP 2 is very temperamental on which tanks it will fire on. I got 3 iClear 30 and one iClear 30s and 6 DCT tanks. My MVP only will fire the DCT tanks if I get a little screwdriver and pull the pin down on the tanks. Only one of the iClear 30 tanks gives me trouble so I just don't use it on the MVP. But it seems to me that the MVP 2 has a factory issue with it.

 

[Mark Anthony]

Hopefully just the contact pin in the MVP dropped a little and you can pull it up ever so slightly or it is just the iclear.... either way if you can get it working again you'll have a great back up to your new MVP that you just ordered!! Resist the temptation to pick up an analog... pick up a throw away at a gas station to hold you over if you have to!!!

 

[Mike Marino]

ok it isnt the MVP 2 at all, it fired up my buddys ego tank just fine, another friends it didnt read it - LCD said - NON. At first it read my atom as - 0.0 and would go to .9 but never past that and would do much. Its still not working on my ICLEAR but like I said i should have all the new material arriving today or tommrow latest. I also order a whole new MVP2 setup just for friends and family interested.

 

[Mike Marino]

when I took apart the atty, a SMALL metal half ring came out. when i took out the ring the LCD said - NON. When i tried to position the small wire half ring back it read 0.0 again. Ill take a pic later if I can, I am in the office now, no IPAD and no PUG

 

[Mike Marino]

the solution. New I clear 30 works beautifully