E2 inside AVS

[B-Rad_The_Mad_Vapr]

someone is pre punching cartos for sale https://www.vaporescence.com/index....d=35&option=com_virtuemart&Itemid=154:tongue:

 

[Captain Morgan]

To punch holes in my cartos I use a "General Tools #89 Stainless Steel Automatic Center Punch" which is spring loaded (no hammer needed). Just place the carto in a "V" block or other support to keep it from rolling, and press down on the punch. It is a quick and easy one handed operation. If you want bigger holes, simply repress a couple of more times on the same hole. You can get one of these at any hardware store for about $20.

 

[RippleInStillWater]

To punch holes in my cartos I use a "General Tools #89 Stainless Steel Automatic Center Punch" which is spring loaded (no hammer needed). Just place the carto in a "V" block or other support to keep it from rolling, and press down on the punch. It is a quick and easy one handed operation. If you want bigger holes, simply repress a couple of more times on the same hole. You can get one of these at any hardware store for about $20.
View attachment 31250

Hmmm, that sounds like just the tool I need!
I've already cracked the first jig I made!!!!

 

[imeothanasis]

thats a very nice tool Captain. Where can we find it?

 

[TVree]

I'm currently using an E2 with 510 connection cartomizer in one of my GGTS AVS units.....left the liquid ring completely open, no hole punching in tube, and it seems to be working fine. Adjusting air as always with CR, and no apparent leakage into CT. It's a little long for the GG mouthpieces to fit, so I just put a drip tip on top. Cartomizer tests at 3.3 ohms, and I'm vaping at 6V.

Just thought somebody could benefit from this experiment....

TVree

 

[Captain Morgan]

thats a very nice tool Captain. Where can we find it?

In the U.S. you can get it at HomeDepot or most any hardware store. Over the internet you can get one at Amazon.com for $23.99 by going here: Amazon.com: General Tools #89 Stainless Steel Automatic Center Punch .

 

[imeothanasis]

thanks buddy, again its a very nice tool and a must for those that use cartos on AVS!

 

[imeothanasis]

Guys, TVree was more than right. Please check here. Inside AVS we can drop anything lol.

http://www.e-cigarette-forum.com/forum/gg/170160-e2-inside-avs2-part-2-a.html#post2830817

I am starting thinking that AVS is not the best feeding system, its the ONLY feeding system! Now E2 inside a solid construction like AVS and without any modification at all

I believe that if you prefill the E2 as you have to do when you buy it then there will be no need to open - close the CR at all.

 

[Poppa D]

The E2 works pretty nicely in the AVS2, will you be making more of these units and their tanks Imeo?

 

[imeothanasis]

I have to make AVS 2 again Poppa, thats true. But I just stopped the steel GGTS production to make more UFS because they disapear in 2 days. I have a little work to do now but AVS 2 is a must and I will make it again for sure