Well today I dropped a dime or should I say about 2000 dimes on an Electric Angel. Can't wait for it to get here. I hope my motto will hold true "You get what you Pay for", holds true and I think it will after all I have read on the EA.
Ea mod
- Thread starter thecatanddog
- Start date
- th_trl_thread_readers 0
- Status
Nice! I love my EA, still the best thing I own. It's so simple, yet so prefect. It's my go to that I know will work perfect everytime.
Sill haven't had the balls to take it outside of the house though.
:: sent from android with tapatalk ::
Grats ProViking! I believe this is one case where you do indeed get what ou pay for. I absolutley, positively love this metal tube.
Had an opportunity today to trade my EA and some cash to a guy at the vape shop I frequent for his Nemesis.. Great looking mod... I vaped on it for a bit while we were hanging out.. Just couldn't do it..couldn't think of a single good reason other than pure vanity why I should....maybe I'm just ignorant..maybe i'm just satisfied with the mod(s) I have and wasn't compelled enough to pull the trigger.. who knows? I know this..don't feel like I missed out on anything...
Last edited:
I have an 1/8 inch gap on my EA with the RSST. The threads on the RSST are crap. The only mods it'll screw all the way down on are the ones made in China (eVic, Vamo, and the eGo batteries). Luckily the EA's positive post compensates for that. Just looks a little weird. Have 2 more RSSTs on order and I'm hoping they got this thread issue fixed now.
By the way, a 7mm x .5 thread cutter fits the threads. Haven't put mine in a vise yet to run the thread cutter all the way down the connection.
Hmm. The threads on my rsst are fine. Also im using the airflow cap. Maybe the threads on the cap better suit the rsst. Iono. I havent used my original cap for some time. Im actually ready to trade my EA for a sentinel if a vape shop is down for a trade
Sent from my DROID RAZR using Tapatalk 2
As I type this I am realizing this post isn't EA Mod specific but I have an EA Mod and it happened because of the floating center pin in my EA Mod.. so here we go..
I found an ideal solution for the busted insulator in the bottom of my AGA.. one of the #60 o-rings I picked up when I was waiting on my VAMO to arrive, anticipating I'd one day have to do the Lo ohm error fix.. that day has not yet come
I don't think it would work as well to replace the top insulator and I don't know how well these o-rings will withstand heat but this seems to be a perfect fit to replace the bottom insulator.
It looks a bit big at first but once the o-ring is seated in the connector the positive post fits nice and snug.
I found an ideal solution for the busted insulator in the bottom of my AGA.. one of the #60 o-rings I picked up when I was waiting on my VAMO to arrive, anticipating I'd one day have to do the Lo ohm error fix.. that day has not yet come
I don't think it would work as well to replace the top insulator and I don't know how well these o-rings will withstand heat but this seems to be a perfect fit to replace the bottom insulator.
It looks a bit big at first but once the o-ring is seated in the connector the positive post fits nice and snug.
Last edited:
So i have no issues with my RSST sitting flush with my EA mod but i'm hearing a ton about the AC9 not sitting flush with the EA mod, am i doomed? (The AC9 will be here in a couple days.)
I never put my AC9 on my EA...would not sit flush on a roller. Unless the 510 on the atty is longer than the EA's is deep, not sure why it wouldn't sit flush.
As I type this I am realizing this post isn't EA Mod specific but I have an EA Mod and it happened because of the floating center pin in my EA Mod.. so here we go..
I found an ideal solution for the busted insulator in the bottom of my AGA.. one of the #60 o-rings I picked up when I was waiting on my VAMO to arrive, anticipating I'd one day have to do the Lo ohm error fix.. that day has not yet come
I don't think it would work as well to replace the top insulator and I don't know how well these o-rings will withstand heat but this seems to be a perfect fit to replace the bottom insulator.
It looks a bit big at first but once the o-ring is seated in the connector the positive post fits nice and snug.
That's a nice fit. Wonder if that would work on the rsst since mine leaks a little from the bottom
:: sent from android with tapatalk ::
Can everyone list where they bought their EA mod from? I bought mine from vapedudes and believe that I got a low serial number because their stock has been sitting for awhile. I don't particularly care about serial numbers though and wish I had bought directly from electricangel.fi. I am very VERY impressed with their customer service. I've set my sights on getting a GGTS but I'm kinda leaning on getting another EA. But I don't need.. really don't need another mech mod (or any mod!) 
These things are all over the charts. I had one that fit everything BUT my Roller. So I managed to work the roller connection so that it would accept my RSST. Good deal, now the Roller connection will fit all RSST's right? NOPE. Thinking it would, I ordered another and received it today. It fits my cheapo Drawtube which I use in the shop but will not thread onto the EA OR the Roller. It won't even thread onto an Ego.
I bought #1331 with its sunburst logo directly from Electric Angel. Ordered May 14, delivered May 20. Quite fast!
Guess I just got luck with my RSST. I did have to get a bit firm with it at first, but it fits nice and flush on my EA mod. It fit flush on all my VV gear when I first got it. I've only been using it on the EA since I coiled it, though.
Last edited:
They put the sunburst logo on the mod now? That makes me want another one.
I ordered mine straight from EA back in January, and got #270.
I've polished the contacts quite a bit (and removed the glue from the gronding post so I can clean it easier), but... still my main mod!
They put the sunburst logo on the mod now? That makes me want another one.
I ordered mine straight from EA back in January, and got #270.
I've polished the contacts quite a bit (and removed the glue from the gronding post so I can clean it easier), but... still my main mod!
I know! I love the new logo also! I haven't actually "polished" my contacts but I wipe them off with a tissue every once in a while.
- Status
Similar threads
