edition 2 revision 4 cartomizers

[xxpjmxx]

Hello

I received these in the mail today from dfwvapor. Not sure how to fill them. Is there a way to fill without a syringe like boge 510s? There's like 2 layers of rubber rings. If syringe is the only way do I inject all the way on the side of the cartomizer? Or between the two rubber rings? Boges seem to be a lot easiet.

Now I took a new boge today and put about 15 small drops in it slowly letting the filler absorb the juice.. is there a reason why it sounds like the atty is drowning?

Thanks

 

[Nomoreash]

Boge cartos make noise, that's normal, just keep them wet. As long as you can see through the center tube it's not overfilled and if it is just blow through one end to clear the tube.

CE2s can be filled without a syringe but it involves removing the gasket from around the atty cup and then you have to reinsert it. It's easier for a beginner just to use a syringe if you have one. Remove the end plug then with a paper clip or something remove the washer. You'll see a cup seal with the atty in the middle. One each side of the cup seal are TEEENY holes, one on each side. That's what you stick the needle through to fill it.

 

[isoplus]

See if this helps.

 

[dormouse]

You are supposed to fill them with a blunt or flexible syringe. They are reservoir cartomizers. And for future reference, if you ever get a Joyetech/Joye cartomizer they are also reservoir and I believe need a sharp syringe.

 

[xxpjmxx]

Cool thanks for the help guys

 

[xxpjmxx]

Well I went to walgreens. No syringes. Went to meijer bout the only syringes they had which were insulin and the needle was too small to suck up the liquid. UGGHHH