eGo ONE tank series – CLR coil

[gandymarsh]

Black, White and Yellow at DirectVapor. I don't think you need a coupon. I think it automatically gives you 10%. Can't remember. I know it's free shipping (no tracking number).
Joyetech eGo ONE Mega VT Atomizer Kit

Ordered 2 of the black Mega VTs from Directvapor. Now I have 4 Megas. Can't use the TC coils til I get a TC mod but I've got some CLRs on the slow boat from China.

 

[Jingles]

I've ordered one Stainless Steel 2.5 ml. from LiteCig so far.

 

[IMRs]

Ordered 2 of the black Mega VTs from Directvapor. Now I have 4 Megas. Can't use the TC coils til I get a TC mod but I've got some CLRs on the slow boat from China.

Cool! As far as the mod. I'm really liking the Eleaf Pico's. Nice and small and they do the job. Evic mini's and Heatvape Defenders are good too. Just a couple of suggestions since there is a thousand out there to pick from.

 

[gandymarsh]

I've got plenty of mods, none have TC.

I've been looking at the Pico but I just can't justify buying one.

I came close last weekend though. I had one in the cart but backed out. The price almost got me. $30.50 + $5 shipping for the full kit after the coupon code VS5OFF. They have the full black and brushed silver for the same price. It is a Chinese vendor. Eleaf iStick Pico Kit 32USD in VapeSourcing | VapeSourcing

 

[pufZeppelin]

Happy Day To All...

​

 

[northhar]

I had an ego one 2.5ml for a while..shelved due to leaking..

I had read a post quite a while ago about using a CLR coil with the ego-one base in a GS-air Ms or M.. I ordered some CLR's from my china source (Fasttech) and well waited..

I tried them but it leaked on the second fill-up.. giving me the idea that the problem was with the o-ring on the ego-one base.

I changed out the o-ring with a slightly smaller one and having removed the top of the CLR coil, I replaced that with a protank coil cup.

So it works and it works well.. in the GS-air MS that I tested. The air flow is a little less on full open but the vapor and flavour is very good. No leaks at all.

I will eventually use it again with the ego-one tank when my new tanks come in that I ordered.

This is the tank I have..

This is the tank I ordered..

I did not like that I had to squint to see the juice.. both are the 2.5ml version.

BTW I blame @IMRs and @Cheechako for making me take it out of the scrap box I threw it in.. But the vape turned out worth it .. Thanks for that..

 

[Cheechako]

I had an ego one 2.5ml for a while..shelved due to leaking..

I had read a post quite a while ago about using a CLR coil with the ego-one base in a GS-air Ms or M.. I ordered some CLR's from my china source (Fasttech) and well waited..

I tried them but it leaked on the second fill-up.. giving me the idea that the problem was with the o-ring on the ego-one base.

I changed out the o-ring with a slightly smaller one and having removed the top of the CLR coil, I replaced that with a protank coil cup.

So it works and it works well.. in the GS-air MS that I tested. The air flow is a little less on full open but the vapor and flavour is very good. No leaks at all.

I will eventually use it again with the ego-one tank when my new tanks come in that I ordered.

This is the tank I have..

This is the tank I ordered..

I did not like that I had to squint to see the juice.. both are the 2.5ml version.

BTW I blame @IMRs and @Cheechako for making me take it out of the scrap box I threw it in.. But the vape turned out worth it .. Thanks for that..

Sometimes it helpa to set aside a problem and then come back to it later, worked in your case!
Would you be able to post pics of this Frankentank?

 

[pufZeppelin]

so is that an attack or praise for those two mugs that are stirin' things up...

 

[pufZeppelin]

jus cuz`

in my hand : 10 wraps of 28g SS around 3.0mm shank / 1.32Ω / 25w-300° / 20mg-95%VG / wht chocolate

 

[Cheechako]

so is that an attack or praise for those two mugs that are stirin' things up...

Stirring up hate and discontent as my Mom used to say!

jus cuz`

in my hand : 10 wraps of 28g SS around 3.0mm shank / 1.32Ω / 25w-300° / 20mg-95%VG / wht chocolate

You fit that in a CLR?

 

[pufZeppelin]

•yes, very close but not touching inside body
•coils are tight but not touching each other
•looking at it, could fit 11 wraps of 28g @ 3mm ID (I think)

in TC runnin 25w/300° it heats, OK

but at like straight watts (12w) it seems too much metal and I don't care for the vape

6wraps/3mm/11w seems more my speed most of the time

 

[northhar]

Sometimes it helpa to set aside a problem and then come back to it later, worked in your case!
Would you be able to post pics of this Frankentank?

Yes it did.. I became interested in the CLR's after reading about how versatile it was as a rebuild-able atty in this thread and the Gs-Air thread. I was not disappointed..

A picture.. of the GS-Air Ms's Ego

Will have to wait till the end of the week for internal pict's, out of town till Friday.

 

[pufZeppelin]

well then, what's the common phrase blurted out when opening the vapemail...?

wow, can't believe it's so small (you know what I mean Cheech)

so I got my ego one V2 in mail today (19mm x 2ml)
promptly opened it, inspected it, washed it

then I built a coil just for it (29g K/6x around 2.5mm=1.44Ω)

it sure seemed tiny but same size as my 1.8ml x 19mm original eGo ONE tank ('cause of the glass ?)
but it stops there, the bases DON'T cross screw into each other; so new is diff than old

put 2.01 ml in syringe, drop some on wick, rest fit into tank no problem...
drip tip is plastic, large all the way thru (no taper) I like it

kinda tricked me, air flow is the 'hidden' type found on others BUT just the notch is out
so with a sharp eye one can look IN and see the position (a little, sorta)
but at least the air flow isn't directed into the users face if you had a mind to blow into it...
thinkin MAYBE the V2 has a bit more airflow...


so I guess I like it and it is a contender to earn a spot in my vape kingdom
now should I get a 4ml version....

just sitting here 'breaking it in' and it vapes great
Charlie Noble had a sale, so I got some Tripoli in tank and it is tasting wonderful

bonus observation: the old coil bodys have a notch to set your wire in while building
newer ones have the notch on BOTH sides (I have both)

​

Vape≈Smart

correction - seems the drip tip is some sort of metal (black)

​

 

[Mactavish]

well then, what's the common phrase blurted out when opening the vapemail...?

wow, can't believe it's so small (you know what I mean Cheech)

so I got my ego one V2 in mail today (19mm x 2ml)
promptly opened it, inspected it, washed it

then I built a coil just for it (29g K/6x around 2.5mm=1.44Ω)

it sure seemed tiny but same size as my 1.8ml x 19mm original eGo ONE tank ('cause of the glass ?)
but it stops there, the bases DON'T cross screw into each other; so new is diff than old

put 2.01 ml in syringe, drop some on wick, rest fit into tank no problem...
drip tip is plastic, large all the way thru (no taper) I like it

kinda tricked me, air flow is the 'hidden' type found on others BUT just the notch is out
so with a sharp eye one can look IN and see the position (a little, sorta)
but at least the air flow isn't directed into the users face if you had a mind to blow into it...
thinkin MAYBE the V2 has a bit more airflow...


so I guess I like it and it is a contender to earn a spot in my vape kingdom
now should I get a 4ml version....

just sitting here 'breaking it in' and it vapes great
Charlie Noble had a sale, so I got some Tripoli in tank and it is tasting wonderful

bonus observation: the old coil bodys have a notch to set your wire in while building
newer ones have the notch on BOTH sides (I have both)


View attachment 575021

View attachment 575013
​

Vape≈Smart

correction - seems the drip tip is some sort of metal (black)

​

I don't see just the tank for sale anywhere?

 

[Cheechako]

well then, what's the common phrase blurted out when opening the vapemail...?

wow, can't believe it's so small (you know what I mean Cheech)

so I got my ego one V2 in mail today (19mm x 2ml)
promptly opened it, inspected it, washed it

then I built a coil just for it (29g K/6x around 2.5mm=1.44Ω)

it sure seemed tiny but same size as my 1.8ml x 19mm original eGo ONE tank ('cause of the glass ?)
but it stops there, the bases DON'T cross screw into each other; so new is diff than old

put 2.01 ml in syringe, drop some on wick, rest fit into tank no problem...
drip tip is plastic, large all the way thru (no taper) I like it

kinda tricked me, air flow is the 'hidden' type found on others BUT just the notch is out
so with a sharp eye one can look IN and see the position (a little, sorta)
but at least the air flow isn't directed into the users face if you had a mind to blow into it...
thinkin MAYBE the V2 has a bit more airflow...


so I guess I like it and it is a contender to earn a spot in my vape kingdom
now should I get a 4ml version....

just sitting here 'breaking it in' and it vapes great
Charlie Noble had a sale, so I got some Tripoli in tank and it is tasting wonderful

bonus observation: the old coil bodys have a notch to set your wire in while building
newer ones have the notch on BOTH sides (I have both)


View attachment 575021

View attachment 575013
​

Vape≈Smart

correction - seems the drip tip is some sort of metal (black)

​

I do like the looks of that tank!
Must resist shinyitis! Must resist!

 

[IMRs]

the bases DON'T cross screw into each other

I wonder if the EO original will be interchangeable with the v2 4 ml.

 

[pufZeppelin]

I don't see just the tank for sale anywhere?

guess sweet-vapes is the only vendor I see have them (att)

and they only have the 2ml ones in stock...

 

[pufZeppelin]

I wonder if the EO original will be interchangeable with the v2 4 ml.

I'm gonna guess no, but bet the TRON tanks will cross fit with the V2 (4mlx4ml)

 

[Mactavish]

guess sweet-vapes is the only vendor I see have them (att)

and they only have the 2ml ones in stock...

Thanks:

Joyetech eGo ONE Mega V2 Tank 4ml

 

[YoursTruli]

Thanks:

Joyetech eGo ONE Mega V2 Tank 4ml

I have been on the notify me list for a little bit, I hope they do get them back in stock.


Heaven Gifts has them in stock
http://www.heavengifts.com/Joyetech-eGo-ONE-Mega-V2-Atomizer.html
shipping cost makes it prohibitive to me though as it doubles the price.