eGo ONE tank series – CLR coil

[pufZeppelin]

strange, I have MANY MANY eGo ONE tanks and never had this problem (or any)

BUT used to have this type of troubles with the old Kanger gear (with afc base)

can only imagine those with troubles have done this , but it should be said...

the set up is just a simple insulated center pin thru the bottom of the base transferring 'contact' from coil to battery
the pin NEEDS to be extended PAST the 510 threads(red arrow) of the base - to ensure this, just PUSH from inside(green arrow) so pin pushes OUT beyond

tools needed

eta:​

 

[bnrkwest]

I just got a couple of these tanks and really like it plus a bunch of CLR coils.

 

[FranC]

Good morning,maniacs

Good to see ya here,bnrkwest

 

[Nanny22]

Welcome, @bnrkwest ! We are always happy to met a new Ego Maniac! Hope you will hang out with us, often. Let us know if you need any help.
And here are some Ego Maniac goodies for you - Welcome to the club!

Help yourself to the t-shirt of your choice, and here are a couple of banners designed by the Ego Maniac team.

 

[Flowersoul]

strange, I have MANY MANY eGo ONE tanks and never had this problem (or any)

BUT used to have this type of troubles with the old Kanger gear (with afc base)

can only imagine those with troubles have done this , but it should be said...

the set up is just a simple insulated center pin thru the bottom of the base transferring 'contact' from coil to battery
the pin NEEDS to be extended PAST the 510 threads(red arrow) of the base - to ensure this, just PUSH from inside(green arrow) so pin pushes OUT beyond

View attachment 598371

tools needed
View attachment 598373

eta:​

View attachment 598391​

Thank you and yes, I have screwed the tank base on without the coil!!

 

[Flowersoul]

@bnrkwest WELCOME!!!

 

[bnrkwest]

Thanks for the welcome! I don't know how I missed knowing about these tanks before LOL I am going to get more for the dark ages of vape

 

[LynnNC]

I put a new 1.0 ohm CLR coil in my eGo V2 tank this afternoon. The draw is very tight even with the airflow on the tank set wide open, what's happening?

 

[pufZeppelin]

you mean it is tighter than OTHER 1.0Ω heating wires you've used ??

.5Ω have big 'center' pins // 1.0Ω have small center pins - try switching the pins

 

[LynnNC]

you mean it is tighter than OTHER 1.0Ω heating wires you've used ??

.5Ω have big 'center' pins // 1.0Ω have small center pins - try switching the pins

I've never used the .5 coils, only the 1.0's. But the draw seems tighter on this coil than the others I've used. And I've never run this tank with the airflow wide open before. I'll look at my other coils to see if I see any difference.

Thanks puf!

 

[pufZeppelin]

OK, gotcha...

sometimes the cotton gets 'mussed-up' maybe poke it around some with like a safety pin...

good luck

 

[tiburonfirst]

and a bump for this deserving thread!

 

[tiburonfirst]

and a bump for this deserving thread!

 

[tiburonfirst]

drat! once would have been enough

 

[Krisma]

I think I am a novice ego maniac

Just picked up a couple of the ego one mega v2's and setup a CLR coil with 2.0ohm coil and rayon wick.

Finally an ego one tank that doesn't drive me nuts, what a great tank.

 

[FranC]

Welcome,Krisma

 

[Krisma]

Welcome,Krisma

Thanks Fran

I was wandering around in the big wide ECF world. I thought I was the only one around that discovered these. Hahaha

I should have known better

 

[Nanny22]

Hi @Krisma -- welcome to the Ego Maniacs! Nice to see you here!

Have a T-shirt and Banner.

 

[FranC]

We ego maniacs love our ego ones The rest of the regular crowd must be sleeping still.

 

[FranC]

There's Nanny. I knew she'd be here soon. Morning,Nanny