ego twist issues

[witty handle]

So I just got my new ego twists in the mail (2 1000 mah batteries)...first, doesn't work with my phoenix 2.4-2.6 ohm tanks...but does work with my visions(2.6-2.8 ohms)...don't know what that's about as I don't know what purpose the ohms serve...also, when the twists are on the charger, the light shows red then blinks really fast green for a split second before going back to red...weird! Anybody have any input on why the phoenix's won't work? Maybe I just need to order the 2.6-2.8 ohm versions? I gonna try connecting the twists via my usb port instead of the wall adapter to try and alleviate the blinking problem as this has never happened with my regular ego batteries. Thanks in advance, Spencer

 

[radeljack]

Safe Vaping Power Chart

I have a twist, at first I couldn't figure out why some of my ce4's were not working on it, came across this power chart and it all made more sense.Safe Vaping Power Chart

 

[witty handle]

Thanks, I saw this chart also...very helpful intellectually, however, the phoenix still works on my old 3.2v ego and not on my twist(regardless of what voltage I turn it to)...the vision still works on both(but my visions leak on the battery terminal)

 

[witty handle]

Alas! problem solved! I called my friend who has experience with the twists and the phoenix...he suggested that I was screwing in my phoenix too far on the threads...it worked...very happy now...crisis averted...thanks for the feedback though, Spencer

 

[Kent C]

When an atty or carto works on one batt and not on another, it is almost always about the connection of the atty (but in some cases the battery) where the center post is depressed (usually) or askew (not so much). Pick it with a dental pick to raise - carefully and keep it centered from the surrounding ring (the opposite pole/electrode).

 

[danimal40]

When an atty or carto works on one batt and not on another, it is almost always about the connection of the atty (but in some cases the battery) where the center post is depressed (usually) or askew (not so much). Pick it with a dental pick to raise - carefully and keep it centered from the surrounding ring (the opposite pole/electrode).

thanks kent c...was wondering why my new clearomizers were not working on my 650 only the 900 ...picked battery with tweezers...works...you rock my friend

 

[zachofalltrades]

I believe the charging behavior is normal. At least, that's the same pattern as mine, and it's worked for me for about 7 weeks so far. It'll turn green completely when it is totally charged.

 

[eidikos]

I believe the charging behavior is normal. At least, that's the same pattern as mine, and it's worked for me for about 7 weeks so far. It'll turn green completely when it is totally charged.

+1 I believe joytech designed it that way so it informs you that the battery is indeed connected (red) and Is indeed charging (green blink)

Sent from my GT-I9000 using Tapatalk

 

[Kenny D]

I've been using twists for a little over a month now and I must say I haven't had one problem with them. I've been using ce4s, EMDCCs, and a super excalibur tank with no issues at all. Also, my charger blinks the same way as yours but it charges perfectly.

Kenny

 

[MagnusEunson]

I've had two problems:

- A very slight leak through the threads of the attie base. I was thinking covering the first few threads w/ thread tape would do the trick of improving the seal. Thoughts? I'd have to clean it off and re-apply every so often but it's better than leaks.

- Feeding thicker juices. Dry draws to prime the atty then regular draw usually does the trick but not always. And once that Ego atty dry burns it's useless no matter how wet after.

-Magnus

 

[mr6614]

my question is when i'm charging, like plugging it in overnight. when the light turns green does it stop charging or is it bad to leave it plugged in after its finished?

 

[Hydrophoid]

Witty, I was watching a youtube vid on the phoenix, and it said something about the center post on it being a give spot so that it would not damage the battery, not sure if you can adjust your model of it it is different (sorry im kind of new, hence watching a 40 min phoenix vid).

My twist does the same thing when charging, also my blu does the same thing, I think there is a cut off circuit in there when the bat is fully charged, and some times the charger is tricked into thinking you are at full charge.

mr6614, I leave my twist on charger over night and they are never warm in the morning, I also frequently forget to unplug my charger from usb, and the light is green when it is not under load. I don't know for sure, but I am comfortable leaving my batteries plugged in for long periods. The same was also true with my blu.

One last thing, I cleaned out my vivi tanks last nigh (v3 models) and dry burned the atty after cleaning them. They all work fine and taste better than the one I rinsed out and refilled right away. They also produced much more vapor than the one that was wet when I filled it.