Eleaf GS Air Fan : Part 2

[LostVapeMonster]

Hi Gracie!
Thank you. I simply adore her.

 

[gandymarsh]

Hey There Gandymarsh, Good Mornin! My 13 Cents Worth...... You Acquired the Best Small Tank Eleaf Makes! That's whether You Use in TC Mode or Not! I think it's Perfect in Size for smaller devices! I do hope they come out in a Larger size to meet the Needs of many of our Brothers and Sisters here! Especially Cheechako! He's Way Past Ready for Em!

1.5 ohm Coils are Great in it! I Prefer TC! But Not Completely locked into it.

If You Prefer, Want/Need tanks a Bit Smaller or have Smaller Devices Check out the MS tanks they are Perfect on iSticks and afford You a Great Vape!

I'll throw this in the Ring, if you Want/Need a Larger Capacity Tank Don't Rule Out the Eleaf MELO tanks! Stock Coils are Good but with Their RBA You can Build some Great/Fantastic Coils! MELO's can Rock! I have Four of Them.... They Rotate through My Devices Daily!

I have a Few Nautilus. You're Right on em! They just don't do the best job!?? Some Folks get em to work good for them but Mine are Reserved for the Basic Devices & Juices 50/50 VG/PG Tobacco and Menthol Flavors Low Volt/Watts. They Work Well with Those High Nicotine Juices! I Really Dig the Cage Tanks you can get for them! Look Great and Very Protective!

Your Questions Will get Answered here in a Timely Manor By Folks with Real Knowledge!

Again, My 13 Cents Worth!
Skully {:{}

PS: Where's the Photos of Your home Made Passthrough!????? We like to see this kind of thing! Please Share!

Hey Skullman.

I don't own any TC devices currently. I'm not in a rush to buy any but maybe someday.

I plan to buy at least one GS-Air MS and maybe some Ms too. I have been looking at the Melo 2 and the Subtank clones on Fasttech. I do want to get into something that has an RBA option.

I don't think you really want to see my homemade passthrough. It's not pretty but it works well. I built it with a mosfet because I wanted to use a tact switch and they won't handle the 4 amps that I'm putting through it.

If anyone wants to see some of my mods, there are some photos in an album on my profile page. The latest one is the first one on that page. Very simple stuff since I just do it for kicks. I don't do machining or fancy woodworking due to lack of tools and patience. The stuff I build is made with off the shelf materials and stuff I have laying around. I would like to build a regulated mod someday but I don't know if it will happen.

 

[Skullman]

What a Cute Little Smile! That One's Just for Grand Mum! She's a Little Angel!

Skully {:{}

OMG! DD just posted this on FB! Oh, my heart! View attachment 504508

 

[LostVapeMonster]

What a Cute Little Smile! That One's Just for Grand Mum! She's a Little Angel!

Skully {:{}

I think so too, Skully. Thanks.
Something tells me she won't be a little angel for long, after all the spoiling she's gonna get.

 

[IMRs]

OMG! DD just posted this on FB! Oh, my heart! View attachment 504508

A wink and a smile! Very sweet!!

 

[IMRs]

 

[tiburonfirst]

wakey, wakey!

 

[Chemtx]

Eggs and bakey?

 

[LostVapeMonster]

Good morning Airheads.

 

[tiburonfirst]

Eggs and bakey?

not a bad idea

 

[Skullman]

~ SillyNilly has a Real Talent here! Blending those Colors without Bleeding! Tight Fit! Look at His/Her Stitching! I Purchased a Couple Holders/Cases two years ago, that guy was good He was out of the of the Carolina's! But it was Black or Brown/Red Stain Only! Look at the Colors on US Flag Mod Holders/Cases. Even the Tooling on those Skulls! How about Those Fitted Bottle Sleeve's! I've Never Seen Anything Like That Before!

Very Cool!

Skully {:{}

~SNIP~

SillyNilly

~SNIP~

Tia

 

[morningdew]

~ SillyNilly has a Real Talent here! Blending those Colors without Bleeding! Tight Fit! Look at His/Her Stitching! I Purchased a Couple Holders/Cases two years ago, that guy was good He was out of the of the Carolina's! But it was Black or Brown/Red Stain Only! Look at the Colors on US Flag Mod Holders/Cases. Even the Tooling on those Skulls! How about Those Fitted Bottle Sleeve's! I've Never Seen Anything Like That Before!

Very Cool!

Skully {:{}

They are fantastic aren't they. I have one for the mvp 20 watt, Native American owl 'engraving', I like it so much I have ordered two more mvp 20s so I can swap the sleeve / holder around. Will try and grab a pic and post.

Only wish I could afford a few more...

 

[Kyi]

Hey guys, just wanted to ask a quick question and sorry I have not looked through the entire thread for the answer. How are the Melo 2 and GS Air TC coils? I am trying to decide between trying the TC coils for those 2 tanks or getting the Kanger Subtank ones instead. I have a few of the GS and Kanger tanks so all I need would be the TC coils, but I don't mind buying the Melo 2 tank if their coils are better. I will be using these with my Wismec Presa 75w TC when I get it and I am not sure which TC coils to get.

 

[IMRs]

'Afternoon Airheads!

 

[Cheechako]

'Afternoon Airheads!

Yes, yes it is, workday is almost done!
Good afternoon to you!

 

[pufZeppelin]

Hey guys, just wanted to ask a quick question and sorry I have not looked through the entire thread for the answer. How are the Melo 2 and GS Air TC coils? I am trying to decide between trying the TC coils for those 2 tanks or getting the Kanger Subtank ones instead. I have a few of the GS and Kanger tanks so all I need would be the TC coils, but I don't mind buying the Melo 2 tank if their coils are better. I will be using these with my Wismec Presa 75w TC when I get it and I am not sure which TC coils to get.

duh… !
seems pretty obvious
get one for each – vape all three


but truly, the Melo2 is just the Aspire coils (atlantis, triton etc)

they really are (3) different coils
small – medium – large
-GS - - -Kanger - -Aspire
and one can expect different results from each…

 

[Kyi]

Well honestly I'd rather save money and just buy one kind for now. I know they're probably different so I'm just looking for opinions on how they perform. I'm a mouth to lung hitter and I vape 50/50 if that helps.

Sent from my SM-N920P using Tapatalk

 

[LostVapeMonster]

Aaaaaaaaahhhhh. Home, sweet, home. Time for my daily Spanish lesson.

 

[tiburonfirst]

Well honestly I'd rather save money and just buy one kind for now. I know they're probably different so I'm just looking for opinions on how they perform. I'm a mouth to lung hitter and I vape 50/50 if that helps.

Sent from my SM-N920P using Tapatalk

kyi, there were a few in here pleased with the premade gs ni coils but most of us, i think, still prefer the gs 1.5 ohm coils

 

[Skullman]

Here in Washington Snohomish County Council Voted to Ban All Public Vaping within County Lines. That includes Vape Stores until they put in their own Ventilation System!?? They have Six Months to Comply. It's getting CRAZY out there!

Skully {:{}