Even more Problems with My 5v

[varalMCheelflip]

So now i am just at a loss... It was working great for about 2 days, I took the atomizer off to show a friend you could switch them out and when I put it back on, nothing.... I have tried raisng the center post on both the connector and the atty but this does nothing.
I can put the same atomizer on a standard blu battery and it fires right up
Someone please help me or im just gona go back to analogs... so tired of all the hassle

 

[varalMCheelflip]

Also I forgot to mention that I get a good reading from the connector, I dont get why its not activating the atty

 

[legpro]

The rubber insulator for the center post of the connector could be torn causing a short that is tripping the battery protection..

 

[varalMCheelflip]

the mod doesnt cut off or anything so I dont think its tripping the batteries, the atty just wont fire up

 

[BuzzKill]

so you get 5 volts out of the connector on the device ? if so it is a connection problem of some sort ? Or it is shorting out .
Pull the center out more and try it again ?? other than that replace the connector

 

[redeyedancer]

801 510 901 ? sounds like you may have messed up the threads on your connector.It sounds like its not seating down enough to make a connection.You have power the atomizer works on another mod.ITs frustrating but its something simple it always is.You may be pushing the center pin up into the atomizer

 

[Richie G]

Two words. Staple mod.

 

[jfdpl686]

Not much help here... but I feel your pain.
I have the same problems sometimes; the funny thing is, some of my attys doesn't work with some devices while in others they work perfectly AND some other attys do the inverse. I'm totally puzzled.
Right now, I have two attys (one joye and one slb) that simply refuses to work in my pass-thru… nada! Then I have another mega (joye) which doesn’t work in my GLV and one slb that doesn’t work in a box mod.
Try this, which is what I do when I face the problem… use an “extender”; those used to charge the Tornado batteries in conventional chargers... the problem may be in the positive connection of the atty, if misaligned or crooked, it may be touching the negative part.

 

[5cardstud]

Try changing the batteries. I had one of mine do that and the batteries were at different charge levels causing it to trip the pcb.

 

[varalMCheelflip]

Two words. Staple mod.

way ahead of you, didnt work

 

[misterD]

one link for you
Box Mod

 

[johnny bobcat]

Two words. Staple mod.

one word, agreed





sorry, read further and op already tried this